{ Group of lots: 1, 2 } Minuteman Floor Scrubber Model M201120-01 190300, w/ (1) Brush and (2) Pads

{ Group of lots: 1, 2 } Channel Lock 8-Gallon 4-HP Wet/Dry Vacuum, Model VS810WD.CL, 120v, 10A

{ Group of lots: 3, 3A } Palmgren 6" Machine Vise

{ Group of lots: 3, 3A } 4" Tilting Machine Vise

(2) 5" Machine Vises

{ Group of lots: 4A, 4B } Hitachi 3.5" NR90AD(S1) Pneumatic Framing Nailer, 3 1/2", Nail Length x Dia. 2" x .113" - 3.5" x .148", 70 - 120-PSI Ai...

{ Group of lots: 4A, 4B } Bosch 4 1/2" 120v Angle Grinder & Bosch 18v Cordless Drill w/ Battery, No Charger ...[more]

(2) Taylor Small Pneumatic Belt Sanders

(1) Snap ON 3/8" Drive Ratchet, (3) 90 degree Clamps, (2) Vise Grip Style Welding Clamps, (1) Channel Lock, (1) Side Cutter

{ Group of lots: 4E, 4F, 4G } Drill Doctor 750sp Drill Sharpener w/ Box

{ Group of lots: 4E, 4F, 4G } Schumacher 6/12v 6amp Charger Model SC1320 Modified, See Photos

{ Group of lots: 4E, 4F, 4G } Mac Tools Bearing/Pulley Puller Set PB900S

Snap-On Torqometer

Lot of Assorted Inspection Tools c/o: (2) Micrometers, Starrett Telescoping Gages s579HZ, (2) Sets Radius Gages, SHARS Screw Thread Micrometer, Mi...

Assorted Inspection Tools c/o: (6) 6" Dial Calipers, (1) 8" Dial Caliper, (2) 12" Dial Caliper, in one box

Porter Cable 3" x 21" 352VS Variable Speed Belt Sander in box

Buffalo No.22 Drill Press s/n 469806, 19 1/2" Dia. Table, 21" swing, 3/4" Jacobs Chuck, 1hp, 220v 3ph

Phase II Benchtop Hand Tapper Stock # 265-110 On Stand with Taps and Tap holders

{ Group of lots: 7, 7A } Pedestal Fan, Approx. 20", 115v

{ Group of lots: 7, 7A } Air Master 30" Pedestal Fan Model K55HX MAL-4064, 115v, located in back room by Four-Slides

{ Group of lots: 8, 9, 10, 11 } 2-Door Cabinet w/ Small Parts Bins and Contents, Appears to Be Sample Products, Cabinet Approx. 38"w X 13" Deep X...

{ Group of lots: 8, 9, 10, 11 } Wooden Bench w/ Contents, Does NOT include Vise, Bench Approx. 8' L X 2' Deep X 41" Tall to work area

{ Group of lots: 8, 9, 10, 11 } Wilton 6" Bench Vise #656

{ Group of lots: 8, 9, 10, 11 } Steel Table w/ Contents, Table Approx. 72" Long X 29" W X 33 1/2" Tall

{ Group of lots: 12, 13 } Small Parts Tumbler On Stand Approx. 12 1/2" Diam, 4" Deep, w/Dayton 1/4hp Motor 208-220/440v 3ph, and Winsmith 913 MWT...

{ Group of lots: 12, 13 } Small Parts Tumbler Approx. 13 1/2" Diam X 6" Deep, w/ Dayton 1/3hp Motor 115/230v 1ph, Belt Driven on short 16 1/2" Ta...

RYOBI 4" X 36" BD4600 Belt/Disc Sander s/n W0501112458, 3,600-RPM w/ Stand

Small Horizontal Ratchet Feed Thread Roller, 220/440v 3ph Currently wired 220v

Shop Built Vibratory Polisher/Deburrer

Waterbury Farrel 1/2" No. 30 Thread Roller, 220v 3ph (O.I.D 2205)

{ Option of lots: 18, 19, 20 } Thread Roller with Stand and Vibratory Bowl Feeder, Winsmith Speed Reducer 200 MWT, 1 1/2 hp, 108-115/230v 1ph

{ Option of lots: 18, 19, 20 } Thread Roller with Stand and Vibratory Bowl Feeder, Winsmith Speed Reducer 920 MWT, 1/3 hp, 208-230/480v 3ph

{ Option of lots: 18, 19, 20 } Thread Roller w/Stand and Vibratory Bowl feeder

Lincoln Electric AC-225 Arc Welder, Input 230v 1ph, Output 225Amps @25Arc Volts, 79V Max OCV @ Rated Input, 20% Duty Cycle

Hannifin 2-Ton HC 2 Hydraulic Press s/n A41090-1 On Stand

Waterbury Farrel 1/4" No. 10 Thread Roller, 2hp, 220/440v (O.I.D. 2302)

Waterbury Farrel 3/8" No. 20 Thread Roller, 2hp, 220v (O.I.D. 2206)

Shop Built 15" Dia. Vibratory Feeder, 110v

Rockford (est.) OBI Press s/n 3920

Milwaukee Model H Horizontal Milling Machine s/n 56-5492, 10" x 50" (est.) Table

Waterbury Farrel 1/2" No. 30 Thread Roller s/n 71931 229 (O.I.D. 2204)

Waterbury Farrel 1/4" No. 10 Thread Roller, 2hp, 200-230/460v 3ph

Waterbury Farrel 3/8" No. 20 Thread Roller , 5hp, 220/380v 3ph

Waterbury Farrel 3/8" No. 20 Thread Roller, 5hp, 220/440v 3ph (O.I.D. 2203)

Nilson S-4 Four Slide Machine s/n 45338, 9 Roller, 2-Plane Straightener (O.I.D. 1103)

Nilson No. 2 Four Slide Machine s/n 78720 (O.I.D. 1104 est)

Nilson No. 1 Four Slide Machine W/ Emmerson Commander SK Variable Speed Drive (O.I.D. 4 (est.)

Waterbury Farrel No. 0 Thread Roller s/n 17270 666 (O.I.D. 2104 est.)

Waterbury Farrel 1/4" No. 10 Thread Roller s/n 333941060 (O.I.D. 2103)

Waterbury Farrel No. 0 Thread Roller s/n 76341 942 (est.)

Waterbury Farrel 3/8" No. 20 Thread Roller s/n OBL, 10-HP, 230/460v 3ph

Waterbury Farrel 1/2" No. 30 Tread Roller s/n 95514 384, 240v 3ph

Waterbury Farrel 3/8" No. 20 Thread Roller, 10-HP, 208-230/460v 3ph (O.I.D. 2113)

Waterbury Farrel 1/4" No. 10 Thread Roller, 5-HP, 220/440v 3ph (O.I.D. 2106)

Waterbury Farrel 1/2" No. 30 Tread Roller (O.I.D. 2112)

Waterbury Farrel 3/8" No. 20 Thread Roller 10-HP, 230/460v 3ph (O.I.D. 2111)

Waterbury Farrel Thread Roller s/n 56483 (est.) 5-HP 230/460v 3ph

U.S. Baird 1/4" No. 2 Four Slide Wire Forming Machine S/N: 51-1606-113, 2-HP, 200, 230/460v 3ph (O.I.D. 1102)

Baird Four Slide Machine s/n 1440-1, 5-HP. 230/460v 3ph, 10-Roller, 2-Plane Straightener

Gear Reducer Model E194B w/Dayton 3-HP Motor Drive, see photos, on one skid