Lot of (3) asst shop items including (1) Dayton 6" D.E. portable pedestal grinder mn 4Z123G 1 phase, and (1) Baldor 1" belt sander 1/3 hp 1 phase

Ellis 20" variable speed floor type drill press mn 9500, 1 1/2 hp, 1720 rpm, 230 volt 3 phase, with AC drive controls and DRO

Clausing Kondia FV-1 vertical milling machine, 3 HP 3 PH, sn AD169, 9" X 48" servo-feed T-slot table, power draw bar, 60 - 4,000 RPM spindle speed...

{ Choice of lots: 169 } } } } } } } } } Clausing Kondia FV-1 vertical milling machine, 3 HP 3 PH, sn AD168, 9" X 48" servo-feed T-slot table, pow...

Clausing Kondia FV-1 vertical milling machine, sn AC401, 3 HP 3 PH, 9" X 48" servo-feed T-slot table, power draw bar, 60 - 4,000 RPM spindle speed...

{ Choice of lots: 171 } } } } } } } } } Clausing Kondia FV-1 vertical milling machine, sn AD171, 3 HP 3 PH, 9" X 48" servo-feed T-slot table, pow...

Clausing Kondia FV-1 CNC vertical milling machine, 3 HP 3 PH, sn NA (covered), 9" X 48" servo-feed T-slot table, power draw bars, 60 - 4,000 RPM s...

Aliant vertical milling machine mn 942-2V, sn K2V-1576, 9" x 42" T-slot table, with power feed, 70-4200 rpm, with Gurley pointfinder DRO

Mark 1224AMR automatic hydraulic surface grinder, over-wheel dresser, auto incremental downfeed, DRO

Sharp chucking lathe, mn 936, digital controls, 6 turret head and 5C collet chuck

Cutmaster FCG-30 tool and cutter grinder with bench and accessories

Sharp 1660L engine lathe, 16" swing X 60" BC, 20-2,000 RPM spindle speeds, inch/metric threading, Accurite DRO, Durian tool post, compound over cr...

Sharp 1640L engine lathe, 16" swing X 40" BC, 30 - 2,000 RPM spindle speeds, inch/metric threading, Newall Topaz DRO, Durian tool post, compound o...

Engine lathe, 18" swing X 48" BC, 52 - 2,000 RPM spindle speeds, inch/metric threading, Newall Topaz DRO, 10" 3 Jaw chuck, tail stock, compound sl...

2007 Haas SL-20 turning center, 10 tool turret, tool presetter, 20 HP drive

2003 Fadal 6030 3 axis CNC vertical machining center 24 position ATC

2000 Fadal 4020 4 axis CNC vertical machining center, 4th Axis rotary index table, 21 position ATC

2007 Deckel Maho /DMG DMU 100 MonoBlock 5 axis CNC universal machining center, 32 position (dual 16) automatic tool changers, round table, HEIDENH...

2002 Deckel Maho/DMG 5 axis CNC universal milling machine, 180 position ATC, HSK-63A spindle taper, 6 position pallet changer, 42" square pallets,...

RMC 1550 cylinder boring mill, 3 spindle caddy, 28.15" max. boring depth, 36.62" vertical head travel, 100 - 1,000 RPM spindle speeds, 60.50" X -8...

RMC 2000 B line boring machine, 72" max. between columns, .9" - 8" boring capacity, 0 - 600 RPM, (2) steady rests, Bar sag measuring device with d...

Sunnen VR7000-K valve resurfacer with with tooling cabinet and accessories

Sunnen HS60-K Engine head honing bench with gauges and accessories

Sunnen CH100 K Horizontal cylinder hone

Sunnen CV-616 D Cylinder King Power Stroke vertical cylinder hone

Sunnen/DCM 3820 block and head CNC rotary surface grinder with e700 CNC controls

2003 (rebuilt in 2016) Newen Epoc CNC valve seat contour cutting machine, sn 877, 5-4,500 RPM spindle speed, 1,320mm X-, 80 mm Y-, 327 mm Z travel...

2003 Newen Epoc CNC valve seat contour cutting machine, sn 855, 5-4,500 RPM spindle speed, 1,320mm X-, 80 mm Y-, 327 mm Z travels, 12 mm X and Y a...

Serdi 100 valve seat cutter, 5 degrees max. spindle tilt, 345 mm/13.5" standard spindle travel, 4 HP spindle motor, 40 - 840 RPM spindle speeds+B2...

Lot of (2) 3-jaw chucks and asst jaws

{ Choice of lots: 296, 296A, 296B } } } } } } } } } Nikken 4th axis rotary table, mn CNC-321

{ Option of lots: 364 } } } } } } } Lot of engine assembly tooling and measuring jigs

{ Option of lots: 364A } } } } } } } Lot of engine assembly tooling and measuring jigs

{ Option of lots: 365 } } } } } } } Lot of engine assembly tooling and measuring jigs

{ Option of lots: 365A } } } } } } } Lot of engine assembly tooling and measuring jigs

Lot of engine assembly tooling and measuring jigs

{ Group of lots: 1186, 1187, 1188 } } } } 1 set raw Ph9 head castings

{ Group of lots: 1250, 1251, 1252 } } Lot of asst fixtures for engine part building (LOCATED IN BLDG 2)