Verarbeitung kaufen

4, Approx. 4 ft Electric Conveyors

Used Konig Mini Rex Type: G-AB/AKG63 Dough Divider with: Model: Mini RexType: G-AB/AKG63Serial: 31.0.2081Year Manufactured: 2008Outfeed Conveyor ...

Anderson Chart Record with Stainless Steel Enclosure

Lot of (4) Tri Clover 1.5" & 2" S/S Check Valves, Clamp Type, (Note: Missing Balls) (INV#99155) (Located @ the MDG Auction Showroom in Pgh., PA)(L...

OK International case sealer, Model SUPERTAPER1A, SN 10-94287, year 2010, top tape head with tail tuck

HydroThrift Chiller, with (2) Centrifugal Pumps, Alpha-Laval Plate Heat Exchanger, Control Panel, & All Associated Components on Skid (LOCATED IN ...

Cardwell VC1659 Vibratory Conveyor: Shaking table dimensions: Length: 180 inchesWidth: 17.5 inches Infeed Height: 26 inches Electrics: Volts...

Series: 1500

2001 ODIM S/S Incline Conveyor, Order #211071109, Aprox. 19 ft. L, with Aprox. 15" W Belt with Aprox. 12" W Cleat Spacing, with Electric Drive (LO...

Mixture of 15" Wide and 24" Wide Chain, Starts at Discharge of Slow Down Module, Approx. 90 Feet of Straight Sections, (4) Inline Crossovers/Trans...

SS Portable Pump, 1.5 HP | Required Rigging and Loading Fee for Simple Loading: $75

Used P.E. Labellers Pressure Sensitive Labeler with: Production speed: up to 300 containers per minute, depending on application Container dimens...

Dimplex Koolant Kooler Air Cooled Chiller, 27 1/2" wide X 25" long box (Located in Sandwich, IL)

Rubber belt conveyor with (2) printers, conveyor 60 in. long x 12 in. wide x 24 in. tall, with (2) Aplink MR X ink jet printers

Chainvey Auger with Stainless Steel Piping (Approx. 3" Diameter with 40' to Mash and 40' Back to Grist Case)

Endress + Hauser Flow Meter, S/N KC011C16000, with Aprox. 1" Clamp Type Inlet/Outlet (INV#103069) (Located @ the MDG Auction Showroom 2.0 in Monro...

Cleaver Brooks Mdoel BM-12-350 Boilermatic Deaerator System, s/n 011183-1-1, New 2015, Note: Listed in Good Condition

Lot of (11) Assorted S/S Ball Valves, Threaded & Clamp Type, Sizes 1" to 2" (Note: Some Missing Handles) (INV#99156) (Located @ the MDG Auction S...

Used Lee Kettle with:  Total capacity: 325 Liters85 Gallons Working capacity: 280 Liters74 Gallons Jacket maximum allowed working pressure: 10...

2001 ODIM S/S Incline Conveyor, Aprox. 22 ft. L, with Aprox. 15" W Belt with Aprox. 12" W Cleat Spacing, with Electric Drive (LOCATED IN GLOUCESTE...

Smoke Generator: Agitated hopper Diameter: 28 inchesDepth: 28 inches Side mounted exhaustStainless steel construction Skidding, Rigging, and Lo...

Alpha-Laval Plate Heat Exchanger, MAWP 75 PSI @ 240 F, MDMT -20 F @ 75 PSI, M/N M6-MFG, S/N 30105-64295 (LOCATED IN WAVERLY, IA)

(21) Sudmo S/S Air Valves, with S/S Manifold (Inv. #103822) (LOCATED MONROEVILLE, PA) (RIGGING, LOADING, & SITE MANAGEMENT FEE: $25.00 USD)

Kraken Automation Top-Loading Case Packer, Model CPK3003, with Allen Bradley Panel View Plus 700 Display, (Note: Control Panel with PC Not Include...

(2) 2"" Stainless Steel Check Valves

Bridge Mdl. Titan BT004/004 8-Head Meatball Former, Ser. #25537-11 (Located in Sandwich, IL)

Forming horn diameter 11 by 6   Rigging, Removal, and SIMPLE Loading: $25.

S/S Catwalk & Platform System (LOCATED IN GLOUCESTER, MA)

T-Dynamic Transfer Section with 15 inch chain, 60 Feet Total Length, Transfers from 15 Inch Chain to 20 Inch Chain and then 33.75 inch chain to in...

Used Alfa-Laval Heat Exchanger with: Overall Dimensions: 49 x 49 x 902.5 inch inlet and outlet into Alfa Laval partHydraulic oil tank included on ...

LKH Aprox. 5 hp Centfrigual Pump, M/N LKH-1, S/N 01-11-59381 (NOTE: Motor Tag Missing on Motor; HP is Projection--Draw Your Own Conclusion) (LOCAT...

(2) Stewart Systems pan conveyors with right hand discharge, 65 in. long x 12 in. wide plastic belt, 28 in. long x 18 in. wide gripper belt, 70 in...

TKF Conveyors case elevator, Model 14957, 24 in. tall infeed, 18 ft. tall discharge

2015 Gemini Werner & Pfleiderer Model CR59-AT Conical Dough Rounder - S/N H_591883 | Required Rigging and Loading Fee for Simple Loading: $350

Used Lee Kettle with:  Capacity: 283 Liters (75 Gallons)Internal maximum allowed working pressure: 45 PSI at 292°FInternal minimum design metal te...

Used Vemag Smoke Generator with: Agitated hopper 35 inch width32 inch depth Stainless steel construction Skidding, Rigging, and Loading Fee: $90

Lot of (3) 1.5" & 2" 3 - Way Clamp Type S/S Plug Valves, (Note: Missing (2) Handles) (INV#99157) (Located @ the MDG Auction Showroom in Pgh., PA)(...

Mueller S/S Plate Heat Exchanger, M/N AT015 SF-150, S/N 1308740-01, Max. Working Pressure 100 PSI, Max. Working Temp. 150(INV#103068) (Located @ t...

Rite Model 325 S Boiler with Water Treatment System and Blowdown Tank, Max 3.25 MBTU/Hr Input, S/N: 32168

Large Section of Case Conveyor, with Aprox. 12" Rubber Belt, Mounted on S/S Frame (LOCATED IN GLOUCESTER, MA) 

Used Domino AGP220AI Printer with:  Model: AGP220AI Inkjet coder Overall Dimensions: 50x28x64 tall Stainless Steel Construction 100-240v 3phase 4...

Stewart Systems overhead conveyor, incline/decline and 90 degree turn, 18 in. wide gripper belt, approximately 54 ft. of conveyor, SS frame, motor...

Gemini Incline Dough Elevator (Approx. 11" x 14' with 7" x 8" x 4" Deep Buckets) | Required Rigging and Loading Fee for Simple Loading: $350

Stiavelli overhead bucket conveyor, approximately 90 ft. long, with 1 bucket feeders,

Used Cretors FT-80F-E02 Hot Air Popper with: Infeed capacity for popcorn: 80 pounds per hour (of raw corn) Feed hopper: 24 inches long x 12 in...

Cleveland Stainless Steel Pneumatic Piston Filler, 2" diameter, 12" stroke, 15 1/2" diameter X 16" deep stainless steel hopper, 1" valued outlet (...

ABE Portable Pump, 2 HP, Genesis Vari Drive | Required Rigging and Loading Fee for Simple Loading: $75

Lot of (4) 2" & 3" S/S 3 - Way & Ball Valves, Clamp & Threaded Type, (Note: (1) Missing Handle) (INV#99158) (Located @ the MDG Auction Showroom in...

Used Smoke Generator with: Dimensions Length: 36 inchesWidth: 28 inchesHeight: 60 inches Hinged door accessStainless steel construction Skidding...

Used Lee Kettle with:  Capacity: 75 Gallons (~283 Liters)Top-mounted propeller agitationTop opening diameter: 16 inchesTotal diameter: 30 inchesDi...

Straight Section of Conveyor, with S/S Waste Chutes & Bottom Mounted S/S Traugh, Overall Length:  Aprox. 21 ft. L x 31" W, Mounted on S/S Frame wi...

2016 VLS Technologies Model FVV012 DE Filter Skid, Stainless Steel, S/N: FVV00325

7 Rolls of Blister Pack Plastic

Used Pack-West 12 ELEVATOR/SORTER/FEEDER with: Conveyor dimensions (inches): Length: 114 (approximately) Width: 12 Cleat dimenions (inches): ...

Cleveland Stainless Steel Pneumatic Piston Filler, 2" diameter, 12" stroke, 15 1/2" diameter X 16" deep stainless steel hopper, 1" valued outlet (...

Crate of Miscellaneous Smoke Generator Parts: 6 stainless steel buckets: Diameter: 12 inchesDepth 12 inches 4 stainless steel trays   (2) tr...

2015 Sveba Dahlen Model MO 881 Dough Moulder / Roller - S/N M238714-1 | Required Rigging and Loading Fee for Simple Loading: $650

Graco Saniforce 515 SS Diaphragm Pump on Stand | Required Rigging and Loading Fee for Simple Loading: $50

2018 Stiavelli long goods 5-scale cartoner loading system , Model SPL M/SR, SN 842218, control panel Model QE, missing components

Stewart Systems pan conveyor, approximately 50 ft of conveyor, SS frame, motor and drives