Los

1314

FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line

In Seneca Foods Auction - Day 2 - Lots 1126 - 1860

Diese Auktion ist eine LIVE Auktion! Sie müssen für diese Auktion registriert und als Bieter freigeschaltet sein, um bieten zu können.
Sie wurden überboten. Um die größte Chance zu haben zu gewinnen, erhöhen Sie bitte Ihr Maximal Gebot.
Ihre Registrierung wurde noch nicht durch das Auktionshaus genehmigt. Bitte, prüfen Sie Ihr E-Mail Konto für mehr Details.
Leider wurde Ihre Registrierung durch das Auktionshaus abgelehnt. Sie können das Auktionshaus direkt kontaktieren über 314-863-7711 um mehr Informationen zu erhalten.
Sie sind zurzeit Höchstbieter! Um sicherzustellen, dass Sie das Los erfolgreich ersteigern, loggen Sie sich erneut ein, bevor die Versteigerung des Loses am schließt, um Ihr Maximalgebot zu erhöhen.
Geben Sie jetzt ein Gebot ab! Ihre Registrierung war erfolgreich.
Entschuldigung, die Gebotsabgabephase ist leider beendet. Es erscheinen täglich 1000 neue Lose auf lot-tissimo.com, bitte starten Sie eine neue Anfrage.
Das Bieten auf dieser Auktion hat noch nicht begonnen. Bitte, registrieren Sie sich jetzt, so dass Sie zugelassen werden bis die Auktion startet.
1/3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 1 aus 3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 2 aus 3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 3 aus 3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 1 aus 3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 2 aus 3
FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line - Bild 3 aus 3
Das Auktionshaus hat für dieses Los keine Ergebnisse veröffentlicht
St. Louis, Missouri
0,00%
18,00%

FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line BF), RIGGING FEE: CONTACT RIGGER

FMC Hydroflex Continuous Hydrostatic-Type Pressure Sterilizing System consisting of a 2-pass steam dome pressure sterilizer and an integrated cascade cooler with a final immersion cooler.

 

The sterilizer is designed to applicable ASME codes for unfired pressure vessels for a maximum steam temperature of 260 degrees F. (Differential height of hydrostatic legs= 50 feet).

The cascade and final immersion cooler is designed to provide cooling times representing approximately 70% of the process time in steam.

 

Included are:

 

A dual carrier chain system with carbon steel link chains of 30,000 lbs. yield strength per strand and extruded aluminum can carriers.

 

An independent drive for each of the two carrier chain systems, with a continuous ratio of 1:6. Each drive is to have remote control speed change from instrument panel, including overload safety device and electric brake to prevent overrun from stopping. Each drive is to feed to a heavy-duty reduction gear box with precision roller chain from gear box to the head shafts on the carrier chain with allowance for individual expansion of each tank section. Safety circuits are to be incorporated to automatically isolate the electric drive motor and stop the sterilizer in the event of a damaged or misaligned can in the feed or discharge mechanism.

A win feed and discharge complex for the inner and outer carrier chain system, designed for a maximum of 2 x 20 feed and discharge cycles per minute.

 

A central control console, equipped for the automatic control and registration of the steam dome (1 control & 2 recording points). and hydrostatic leg temperatures (1 control & 4 recording points) in accordance with current California State requirements, applicable to hydrostatic processes with "bot leg" operations; and the automatic control of the hydrostatic water level.    The control console also contains ancillary dial indicators for steam and air supply pressures; remote controls for inner and outer chain speeds; tachometers, elapsed time meters and percentage load indicators for both chain drive systems; electric motor starter buttons (lock out type) and indicating lights for all motors of the main chain drives

and the feed and discharge systems.

 

Additional mercury-in-glass thermometers for the sterilizer and a direct connected temperature controller for cooling water make-up are provided.

 

A water counter-flow circulating system between the two hydrostatic legs for the purpose of heat recuperation and temperature equalization within the feed and discharge leg.

 

A 3-pass cascade cooler complete with independent circulating pumps; with a separate final immersion cooler for each chain, and with a common cooling water sump. 

 

The total cooler capacity (cooling time) equals 70% of the steam dome capacity (sterilizing time).

An automatic chain lubricating system for each carrier chain

strand.

 

A manual steam and condensate treatment system. (Betz Chem-Feed or equivalent), consisting of two 50 gal. tanks for chemicals, dual pump and motor

 

Chemicals required for the control of oxygen and pH (near 8.0) mqst be determined by customer through proper analysis of his water and steam.

 

A manual skimmer at steam dome water level.

 

An inner and outer carrier chain system, each consisting of two special heavy duty "Link Belt" carbon steel carrier chains, each of 30,000 lbs. minimum yield strength, with cadmium plated and heat-treated side plates. Chain rollers, pins, and bushings are case hardened. Pins are equipped with individual grease fittings.

Both pins arid bushings are mechanically locked to side plates and can carriers of extruded aluminum are individually locked to the carrier chains.

 

A basic operator's platform between the feed/discharge stations (does not include extended platform for location of can lay down and can erector, control console and working space for outer feed/discharge station).

 

 

 

FMC Hydrostatic Can Cooker, 'The Tower', Line BE/BF (BG/BH?) (Note - Includes Cooling Water for Line BF), RIGGING FEE: CONTACT RIGGER

FMC Hydroflex Continuous Hydrostatic-Type Pressure Sterilizing System consisting of a 2-pass steam dome pressure sterilizer and an integrated cascade cooler with a final immersion cooler.

 

The sterilizer is designed to applicable ASME codes for unfired pressure vessels for a maximum steam temperature of 260 degrees F. (Differential height of hydrostatic legs= 50 feet).

The cascade and final immersion cooler is designed to provide cooling times representing approximately 70% of the process time in steam.

 

Included are:

 

A dual carrier chain system with carbon steel link chains of 30,000 lbs. yield strength per strand and extruded aluminum can carriers.

 

An independent drive for each of the two carrier chain systems, with a continuous ratio of 1:6. Each drive is to have remote control speed change from instrument panel, including overload safety device and electric brake to prevent overrun from stopping. Each drive is to feed to a heavy-duty reduction gear box with precision roller chain from gear box to the head shafts on the carrier chain with allowance for individual expansion of each tank section. Safety circuits are to be incorporated to automatically isolate the electric drive motor and stop the sterilizer in the event of a damaged or misaligned can in the feed or discharge mechanism.

A win feed and discharge complex for the inner and outer carrier chain system, designed for a maximum of 2 x 20 feed and discharge cycles per minute.

 

A central control console, equipped for the automatic control and registration of the steam dome (1 control & 2 recording points). and hydrostatic leg temperatures (1 control & 4 recording points) in accordance with current California State requirements, applicable to hydrostatic processes with "bot leg" operations; and the automatic control of the hydrostatic water level.    The control console also contains ancillary dial indicators for steam and air supply pressures; remote controls for inner and outer chain speeds; tachometers, elapsed time meters and percentage load indicators for both chain drive systems; electric motor starter buttons (lock out type) and indicating lights for all motors of the main chain drives

and the feed and discharge systems.

 

Additional mercury-in-glass thermometers for the sterilizer and a direct connected temperature controller for cooling water make-up are provided.

 

A water counter-flow circulating system between the two hydrostatic legs for the purpose of heat recuperation and temperature equalization within the feed and discharge leg.

 

A 3-pass cascade cooler complete with independent circulating pumps; with a separate final immersion cooler for each chain, and with a common cooling water sump. 

 

The total cooler capacity (cooling time) equals 70% of the steam dome capacity (sterilizing time).

An automatic chain lubricating system for each carrier chain

strand.

 

A manual steam and condensate treatment system. (Betz Chem-Feed or equivalent), consisting of two 50 gal. tanks for chemicals, dual pump and motor

 

Chemicals required for the control of oxygen and pH (near 8.0) mqst be determined by customer through proper analysis of his water and steam.

 

A manual skimmer at steam dome water level.

 

An inner and outer carrier chain system, each consisting of two special heavy duty "Link Belt" carbon steel carrier chains, each of 30,000 lbs. minimum yield strength, with cadmium plated and heat-treated side plates. Chain rollers, pins, and bushings are case hardened. Pins are equipped with individual grease fittings.

Both pins arid bushings are mechanically locked to side plates and can carriers of extruded aluminum are individually locked to the carrier chains.

 

A basic operator's platform between the feed/discharge stations (does not include extended platform for location of can lay down and can erector, control console and working space for outer feed/discharge station).

 

 

 

Seneca Foods Auction - Day 2 - Lots 1126 - 1860

Endet ab
Ort der Versteigerung
2801 Finch Road
Modesto
California
95354
United States

Für Schneider Industries Versandinformtation bitte wählen Sie 314-863-7711.

Wichtige Informationen

6 Day Auction!!  Sale Dates -- October 23, October 24, October 25, October 30, October 31 and November 1

Register for 1 day and be automatically registered for all 6 days.

Click Here for Day 1 Auction- Equipment List, Photos and Internet Bidding

 

Click Here for Day 2 Auction- Equipment List, Photos and Internet Bidding

 

Click Here for Day 3 Auction- Equipment List, Photos and Internet Bidding

 

Click Here for Day 4 Auction- Equipment List, Photos and Internet Bidding

 

Click Here for Day 5 Auction- Equipment List, Photos and Internet Bidding

 

Click Here for Day 6 Auction- Equipment List, Photos and Internet Bidding

Largest Fruit Processing and Packaging Auction in History. Featuring: (25) Fruit Canning Lines with Angelus Seamers, Syrupers, Solbern Fillers, Cookers, Coolers, Hydrostatic Cooker, Bulk Receiving, 2015 Navatta Stone Fruit Cleaning & Processing Line, Late Model Optical Sorting, Turbo Extractors, Evaporation, Stainless Processing, Decanters, Slicing Decks, 30+ Urschel Slicers and Dicers, Feed Conveyors, Cherry Coloring and Packaging Plant, Fruit Cocktail Plant, Secondary Packaging, PET Jar Line, Palletizing, Syrup Production Room, Vibratory Conveyors, Lab, Rolling Stock, Plant Support and More!!

Inspection Times are from 9:00 AM to 2:00 PM Beginning October 8 and Continuing Through October 19.

Rigging Fees Will Be Charged on Every Lot

Only Approved Contractors Will Be Conducting Removal

Absolutely No Hand Carrying or Self Removal

Sale in Conjunction with New Mill Capital and Smith Food Machinery

AGB

2018 Terms of Sale Agreement

SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS 15% Buyer's Premium on all sales, 3% Internet Fee. Full Payment at Termination of Sale. All Bills must be completed on Day of Sale.

All Items Subject to prior sale or transfer.

ALL BUYERS BE AWARE THAT RIGGING FEES MAY APPLY TO ALL PURCHASES. APPROVED RIGGERS WILL BE POSTED ONLINE FOR PRE AUCTION RIGGING FEES IF NOT POSTED IN EACH LOT DESCRIPTION.

1. Only Cash, Checks, Wire Transfers or Cashiers Checks payable to Schneider Industries Inc. will be accepted. No equipment will be removed from the sale site until payment is received by Schneider Industries. NO EXCEPTIONS! 

2. While descriptions are believed to be correct, the seller's agent or the owners make no warranties or guarantees expressed or implied, as to the genuineness, authenticity of, or defect in any lot and will not be held responsible for advertising discrepancies or inaccuracies. Everything sold "AS IS" and "WHERE IS" except as expressly made in writing. No warranties are made as to the merchantability of any items or their fitness for any purpose.

3. Purchaser hereby agrees to defend, indemnify and hold harmless Seller its directors, officers, employees and other agents and representatives from and against any and all liabilities, judgments, claims, settlements, losses, 
damages, penalties, obligations and expenses, including attorney`s fees and expenses and other professional fees and expenses, incurred or suffered by such person arising from, by reason of, or in connection with any loss, damage or injury to person or property arising from, by reason of or in connection with the Goods sold hereunder. This indemnification shall survive delivery of the Goods to Purchaser and any subsequent sale or other transfer of the Goods to a third party.

4. It is the buyer's responsibility to secure all equipment to meet all applicable government safety standards in using or removing items purchased. All Import, Export, Taxes, Packaging, Rigging & Transportation fees are the buyer`s responsibility. Schneider Industries will provide our customary invoice. 

5. Sales Tax will be added to the purchase of all taxable items. Dealers who purchase for resale must file their resale permit numbers. If sales tax is not collected at the time of sale and is deemed needed to be paid at a later date, buyer agrees to pay all required taxes.

6. Purchaser does hereby indemnify and hold harmless auctioneer and seller from any and all damages, claims or liabilities from injuries to persons or property of any type whatsoever caused during the sale or by the removal of items purchased.

7. Seller's agent and Seller shall have no liability to the purchaser due to non-delivery of any item for any reason other than to return to the Purchaser the monies deposited for non-delivered items.

8. In the event the purchaser fails to pay the whole of the purchase within the time set forth by the auctioneers and/or fails to comply with any of the conditions or terms of sale, the seller may retain and/or recover the deposit specified as liquidated damages and, in addition thereto, items that are not paid for can be resold at public or private sale without further notice. Any deficiency resulting from such resale shall be paid to the auctioneers by the defaulting purchaser together with all charges, fees, and expenses incurred by such resale and enforcement of the obligation hereunder.

9. The Bidder becomes solely responsible for all items purchased by him immediately following his winning bid at the auction. Therefore, he is advised to further guard and insure his items at his own discretion.


10. Items must be removed from the premises within the removal time announced at the sale. No item can, on any account, be removed before termination of the sale. Removal shall be at the expense, risk and liability of the purchaser. Auctioneers shall not be responsible for items not removed within the time allowed. If equipment is not removed within specified removal time, purchaser shall be liable for any moving and storage costs incurred and, if not so removed, the items shall be deemed abandoned.

11. If any shortage exists on estimated counts, an adjustment will be made if claims are made at time of removal. No adjustment will be allowed after items are removed from the premises.

12. Technology Disclaimer: Auctioneer does not warrant that the functions, features or content contained in the website, including any third-party software, products or other materials used in connection with the website, will be timely, secure, uninterrupted or error-free, or that defects will be corrected.


13. If any dispute arises between two or more bidders, the seller's agent may or may not put the lot up again at once, and resell. 

14. The seller's agent, when acting as agent only, is not responsible for acts of its principals.

15. 15% Buyer's premium will be applied to all sales. Seller reserves the right to accept or reject any and all bids. A 3% Internet fee will be applied to all online purchases.

16. Some items may have minimums or reserves.  Therefore, bidder acknowledges they have been informed that Auctioneer may bid at the auction for its own account or on behalf of a third party or the seller.

17. By accepting a sale listing catalog and signing this form the buyer agrees to these terms and any announced terms at the sale.

Vollständige AGBs