LaBour centrifugal pump, model A80 HS LVA, 6" x 4" x 9" housing, 7.81" impeller diameter, R55 Nickel alloy product contact surfaces, rated 1000 gp...

5000 gallon jacketed tank, 304 stainless steel construction, 9' diameter x 128" straight side, dished ends, dimple jacketed on straight side and b...

Used 56 sq. ft. ITT heat exchanger, carbon steel construction, rated 150 psi / full vacuum @ 375 degrees F shell side, jacketed for 150 psi @ 375 ...

1,000 gallon Whiting Metals kettle, 304 stainless steel construction, dish top and bottom, 64" diameter x 64" straight side, jacketed for 64 psi @...

Used 500 gallon Ardeth Engineering tank, stainless steel construction, 53" diameter x 57" straight side, dish top and bottom, with top entering 3 ...

Used 462 sq. ft. Doyle & Roth shell and tube heat exchanger, 304L stainless steel shell, tubes, tube sheets and bonnets, (134) 1" diameter x 158" ...

Durco centrifugal pump, stainless steel construction, 1.5" x 1" x 8" impeller, 55 gpm at 60' head pressure, on base with 7.5 hp, 230/460 volt xp m...

Durco centrifugal pump, stainless steel construction, 2" x 1" x 10" impeller, rated 12 gpm at 82' head pressure at 275 psi at 100 f, on base with ...

Durco centrifugal pump, stainless steel construction, 3" x 1.5" on base with 10 hp, 230/460 volt xp motor. ...[more]

Durco centrifugal pump, stainless steel construction, 3" x 1.5" on base with 10 hp, 230/460 volt xp motor, serial# 546663. ...[more]

Durco centrifugal pump, stainless steel construction, 6" x 4" x 10" impeller, rated 969 gpm at 67' head pressure on base with 25 hp, 230/460 volt ...

Durco centrifugal pump, stainless steel construction, 1.5" x 1" on base with 5 hp, 230/460 volt xp motor, serial# R000713. ...[more]

Durco centrifugal pump, stainless steel construction, 3" x 2" x 13" impeller, rated 242 gpm at 100' head pressure, on base with 15 hp, 230/460 vol...

Durco centrifugal pump, stainless steel construction, 1.5" x 1" on base with 7.5 hp, 230/460 volt xp motor. ...[more]

Used 56 sq. ft. ITT heat exchanger, carbon steel construction, rated 150 psi / full vacuum @ 375 degrees F shell side, jacketed for 150 psi @ 375 ...

FIX Peter Steimel GmBH super sack/gaylord loading station, type 1200/1/1-E, designed to handle both super sack bags on skids and gaylord boxes on ...

Fast And Fluid Management color coating dispenser, model PD500, 10 canister setup, 100/240 volt 50/60 hz, serial# 99965-825710, built 2008. Loadi...

 .75" Wayne extruder, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section with feed hopper, 3 zone control panel on stand with...

Gala tempered water system, model TWS 60, rated 60 gpm with heater, 3 hp circulation pump, Gala model 8.2 BF spin dryer, driven by 3 hp motor, wit...

Used 120 mm Davis Standard extruder, model 120-M-60TPIH, 30:1 l/d, electrical heated, air cooled barrel, jacketed feed section, driven by 200 hp d...

100 ton Newberry injection molder, model H6-100MT, 14" x 17" tie bar spacing, hydraulically driven extruder, 20 hp on board pump, 460 volt, serial...