GRINDER, DEWALT 6" MDL. D28499, 6,000 RPM

{ Choice of lots: 3 } GRINDER, DEWALT 6" MDL. D28499, 6,000 RPM

LOT CONSISTING OF: open & closed end wrenches, 1/2" drive socket flex handles, tubing benders & other items ...[more]

LOT CONSISTING OF: Allen wrenches, torque wrenches, Jacob chuck wrenches & Allen socket wrenches ...[more]

LOT CONSISTING OF: box wrenches & jacks ...[more]

LOT CONSISTING OF: Wilton bench vise (on stand) & 8" bench grinder (in need of repair) ...[more]

PARTS WASHER, WESTWARD, 20 gal. cap., 20" x 30" x 34" ht.

{ Group of lots: 63, 64 } LOT CONSISTING OF: Gagemaker .750 taper blocks & TF-risers, 1" & 5" ...[more]

INTERNAL THREAD ROLL GAUGE, GAGEMAKER, 2-1/2" reach, 16" to 24"

LOT CONSISTING OF: tooling (for collet machine) w/cabinet & holders ...[more]

TABLE, w/1" T-slots, 90"W. x 5-1/2" thk. x 22'L.

LOT OF CHUCK JAW SCREWS

LOT OF BOLTS, w/nuts (in one box)

LOT OF VISES (on one pallet)

{ Group of lots: 144, 145, 146, 147 } RIGHT ANGLE HEAD (for HNK boring mill)

{ Group of lots: 144, 145, 146, 147 } RIGHT ANGLE HEAD (for HNK boring mill)

{ Choice of lots: 186, 187 } PERMANENT LIFT MAGNET, ERIEZ SAFE HOLD 10,000 LB. CAP. MDL. 197

{ Choice of lots: 186, 187 } PERMANENT LIFT MAGNET, ERIEZ SAFE HOLD 10,000 LB. CAP. MDL. 197

{ Choice of lots: 211, 212, 213, 214, 215, 216, 217, 218 } STEEL TABLE, 40"W. x 60" x 36" ht., w/vise & tool changer ...[more]

{ Choice of lots: 211, 212, 213, 214, 215, 216, 217, 218 } STEEL TABLE, 40"W. x 60" x 32" ht., w/vise & tool changer ...[more]

{ Choice of lots: 219, 220 } STEEL TABLE, 48"W. x 60" x 36" ht., w/vise

BORE CLADDER SYSTEM, ARC SPECIALTIES MDL. ARC-6G, new 2013, servo controlled rotary torch head, 96” vertical (mast) travel (counterbalanced), 60” ...

LOT CONSISTING OF: in-process material, machine base, 102" x 102" table.

ROTARY TABLE, ULTRARON TILT, variable controller, 24" AA gage, Heidenhain D.R.O.

ROTARY TABLE, TROYKE 25" MDL. R-25

DIVIDING HEAD, CINCINNATI, 6" dia. 3-jaw chuck

ROTARY INDEXER, YUASA ACCU-DEX SUPER SPACER, 8" dia. 3-jaw

ROTARY INDEXER, YUASA SUPER SPACER, 8" dia. 3-jaw

RIGHT ANGLE HEAD, BIG CAT 50, extended nose (PDQ Marlin Tool 402-21-017)

CHUCK, CUSHMAN POWER 24" MDL. 2067024A15D

CHUCK, BISON, 24-1/2" 4-jaw, 6-1/4" through hole

CHUCK, 26" dia. 4-jaw, 5-1/2" through hole

CHUCK, BUCK, 18" dia. 4-jaw, 5" through hole

CHUCK, BISON, 16" dia. 4-jaw, 4" through hole

CHUCK, HORTON, 10" dia. 4-jaw, 3" through hole

CHUCK, 25" dia. 3-jaw, 10" through hole

CHUCK, SKANDINAUISKA, 21" dia. 3-jaw, 7" through hole

{ Group of lots: 322, 323 } CHUCK, 18" dia. 3-jaw, 4" through hole

{ Group of lots: 322, 323 } CHUCK, 15" dia. 3-jaw, 3" through hole

{ Group of lots: 324, 325 } CHUCK, 15" dia. 3-jaw, 4" through hole

{ Group of lots: 324, 325 } CHUCK, 15" dia. 3-jaw, 4" through hole

{ Group of lots: 326, 327, 328 } CHUCK, 15" dia. 3-jaw, 3" through hole

{ Group of lots: 326, 327, 328 } CHUCK, 12" dia. 3-jaw, 3" through hole

{ Group of lots: 326, 327, 328 } CHUCK, 12" dia. 3-jaw, 4" through hole

{ Choice of lots: 331, 332 } ROLLING CART (for CAT-50 tooling) (delayed removal - cannot be removed until contents have been taken)

{ Choice of lots: 331, 332 } ROLLING CART (for CAT-50 tooling) (delayed removal - cannot be removed until contents have been taken)

CNC HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL. TX60, retrofitted 2013, Siemens Sinumerik control, 48” x 72” table, 6” spdl., Asset No. BM-9 (o...

CNC HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL. TX60, retrofitted 2013, Siemens Sinumerik control, 48” x 72” table, 6” spdl., 90 pos. ATC, S/N 5...

CNC HORIZONTAL BORING MILL, GIDDINGS & LEWIS, retrofitted 2013, Siemens Sinumerik control, 60” x 120” table, 6” spdl., (4) outriggers, S/N N.A., A...

{ Choice of lots: 346 } MODULAR, FACING & CONTOURING HEAD, COGSDILL MDL. ZX420-TC-CAT-50-0 PROFILING & CONTOURING STYLE, 4.00" max. spdl. stroke,...

MODULAR, FACING & CONTOURING HEAD, COGSDILL MDL. ZX420-TC PROFILING & CONTOURING STYLE ...[more]

MODULAR, FACING & CONTOURING HEAD, COGSDILL MDL. ZX200-TC FACING & GENERATING STYLE, Cam-Locket bonnet, S/N 24240 ...[more]

MODULAR, FACING & CONTOURING HEAD, COGSDILL MDL. MBT75 CONTOURING STYLE, sgl. slide, Tool No. MBT75-ST-CAT50-0, S/N 52916 ...[more]

{ Group of lots: 352, 353 } LOT CONSISTING OF: Kennametal KM63 modular boring bar, 2-1/3" dia. X 14", approx. (13) interchangeable heads

{ Group of lots: 352, 353 } LOT OF MODULAR TOOLING, KENNAMETAL KM80

{ Group of lots: 354, 355 } LOT OF MODULAR TOOLING, KENNAMETAL, KM80 & KM63 ...[more]

{ Group of lots: 354, 355 } LOT OF MODULAR TOOLING, KENNAMETAL KM80

LOT OF MODULAR TOOLING, KENNAMETAL KM80

{ Group of lots: 357, 358, 359 } LOT OF MODULAR TOOLING, KENNAMETAL KM80

{ Group of lots: 357, 358, 359 } LOT OF MODULAR TOOLING, KENNAMETAL KM80