NEW Anderson Pressure Sensors - Rigging Fee: $60

(6) S/S Air Valves, (3) Check Ball and Assorted Butterfly Valves, (9) Flowverter Stations, Jumpers and Sensors - Rigging Fee: $750

S/S Piping: 300’+, Fittings and Clamps - Rigging Fee: $750

S/S Piping: 40’, (5) Air Valves and Sensors - Rigging Fee: $350

Alfa Laval Separator Tools, O-Rings, Service Kits, Sealing Kits and Knaack Portable Gang Box - Rigging Fee: $250

APV 6,000 GPH Pasteurization System with 4-Zone S/S Plate Heat Exchanger, Model: R51, Nested S/S Holding Tube, 150 Gallon Hinged-Lid S/S Balance T...

S/S Alfa Laval Air Valves with Control Tops and S/S Panel: Mounted on S/S Base - Rigging Fee: $375

APV 6,000 GPH Pasteurization System with 4-Zone S/S Plate Heat Exchanger, Model: R51, Nested S/S Holding Tube, 120 Gallon Hinged-Lid S/S Balance T...

Waukesha Cherry-Burrell Centrifugal Pump, Model: C114, S/N: 100000242991109 with Baldor 2 HP 3,450 RPM Motor - Rigging Fee: $150

45 Gallon Poly Tank with S/S Stand and (2) Pulsation Metering Pumps - Rigging Fee: $150

S/S Topped Table: 4’ x 30” - Rigging Fee: $50

Assorted S/S Air, Air Actuated, Check, Ball and Butterfly Valves - Rigging Fee: $1,400

Tuchenhagen S/S Air Valves in Manifold with Control Tops - Rigging Fee: $270

Tuchenhagen S/S Air Valves in Manifold with Control Tops - Rigging Fee: $305

Mueller 2,000 Gallon x 2-Compartment Jacketed S/S Tank, Model: SRW, S/N: D-16231-1-2 with Vertical Agitation, Level Sensors, Anderson AJ-300 Chart...

8-Port 2" Tri- Clamp Flowverter Station with Jumper - Rigging Fee: $150

9-Port 2" Tri-Clamp Flowverter Station with Proximity Switches and Jumpers - Rigging Fee: $150

Assorted S/S Valves, Including: Air, Check and Ball Valves - Rigging Fee: $700

S/S Piping: 1,200’+, Fittings and Clamps - Rigging Fee: $2,500

RMC Sanitizing Foaming Station with (2) Noses, (2) Sprayers, Filter, Dickson Chart Recorder and Valves - Rigging Fee: $250

Century Refrigeration 4-Fan Unit Cooler - Rigging Fee: $1,500

Sections: Pallet Racking: 21’ x 8’ - Rigging Fee: $300

Assorted Poly Gloves, Stretch Wrap, Face Masks, 60 mL Syringes, Aprons, Trash Receptacles Liners, Plastic Bottles and Lids - Rigging Fee: $150

(16) Boxes: Scotch-Brite Light Duty Cleansing Pads (20 each) and (46) Boxes: Green Thumb Nitrile Gloves (100 count) - Rigging Fee: $100

Scott Turbon 2,000 Gallon Dome-Top Dish-Bottom Vacuum Jacketed S/S Homogenizing Blend Tank, Model: 2000 U.S.G. Pros., S/N: 5639A with 100 HP Homog...

Hose Station with Nozzle, Filter and Valves - Rigging Fee: $100

3-Port S/S Flowverter Station with End Caps, Clamps and Jumper - Rigging Fee: $150

3-Port S/S Flowverter Station with End Caps, Clamps and Jumper - Rigging Fee: $150

Lyco Wausau Vacuum Pump, Model: 501-80, S/N: 580-0152-01 with Baldor 3 HP 1,760 RPM Motor: Mounted on S/S Base - Rigging Fee: $250

Tuchenhagen 4-Way S/S Air Valves with Control Tops - Rigging Fee: $140

Tuchenhagen S/S Tank Air Valves (For Lot 244) - Rigging Fee: $400

Tuchenhagen S/S Tank Air Valves (For Lot 245) - Rigging Fee: $400

Tuchenhagen S/S Tank Air Valves (For Lot 246) - Rigging Fee: $400

Tuchenhagen S/S Air Valves in Manifold with S/S Rack - Rigging Fee: $455

3-Port S/S Flowverter Station with End Caps, Clamps and Jumper - Rigging Fee: $150

(22) ASCO Solenoids, Digital Display and (5) S/S Enclosures - Rigging Fee: $300

S/S Piping: 240’+, Fittings, Clamps and Air, Air Actuated and Assorted Ball Valves (This Room Only) - Rigging Fee: $500

Hot Water Station with Hose, Nozzle, Filter and Ball Valves - Rigging Fee: $100

Alfa Laval S/S Air Valves with Control Tops in Manifold with 20 Gallon S/S Drain Trough - Rigging Fee: $240

4-Port S/S Flowverter with End Caps, Clamps and Jumper - Rigging Fee: $150

3-Port S/S Flowverter Station with End Caps, Clamps and Jumper - Rigging Fee: $150

4-Port S/S Flowverter with End Caps, Clamps and Jumper - Rigging Fee: $150

Centrifugal Pump with Baldor 5 HP 1,750 RPM Motor: Mounted on S/S Base - Rigging Fee: $150

5-Port S/S Flowverter with End Caps, Clamps and Jumper - Rigging Fee: $150

8-Port S/S Flowverter Station with End Caps, Clamps and (3) Jumpers - Rigging Fee: $150

Assorted S/S Air Valves, Including: Alfa Lavals with Control Tops (This Room Only) - Rigging Fee: $175

S/S Piping: 160’+, Fitting and Clamps (This Room Only) - Rigging Fee: $350

Foxboro Mass Flow Meter with Digital Display, Model: CFT50-B1E1DBZ-A and S/S Cover - Rigging Fee: $150

Communication Cable S/S Junction Panels - Rigging Fee: $200

S/S Piping: 200’+, Fittings, Clamps, (7) Assorted S/S Air, Air Actuated and Check Valves (This Hallway Only) - Rigging Fee: $400

4-Port S/S Flowverter Station with End Caps, Clamps and Jumper - Rigging Fee: $150

Walker 10,000 Gallon Jacketed S/S Silo: 97” O/D, Model: VSHT, S/N: SPG-20798 with Vertical Agitation, Sensors and Gauge - Rigging Fee: $7,500

(2) 4-Port S/S Flowverter Stations with End Caps, Clamps and (2) Jumpers - Rigging Fee: $300

4-Port S/S Flowverter Stations with End Caps, Clamps and (1) Jumpers - Rigging Fee: $150

5-Port S/S Flowverter Stations with End Caps, Clamps and (1) Jumpers - Rigging Fee: $150

5-Port S/S Flowverter Stations with End Caps, Clamps and (2) Jumpers - Rigging Fee: $150