Ampco Centrifugal Pump with 25 HP 3,510 RPM Motor, 3" x 2.5" S/S Head, Clamp-Type - Rigging Fee: $200

Fristam Centrifugal Pump, Model: FPX 3542-165, 3" x 3" S/S Head, Clamp-Type - Rigging Fee: $200

Allen-Bradley PanelView Plus 1000 HMI with S/S Enclosure (Mag Meter Readout Not Included) - Rigging Fee: $200

Dual Receiving Bay Platform with Hydraulic Wings - Rigging Fee: $2000

S/S Tanker CIP Spray Balls - Rigging Fee: $75

7,200 Gallon S/S Sucrose Silo with Pump - Rigging Fee: $7500

Glycol System with Alfa Laval Plate Heat Exchanger, (5) 15 HP Pumps, Accumulator and Tank - Rigging Fee: $4500

Clack Water Softener - Rigging Fee: $200

2013 Williams and Davis 350 HP Steam Boiler, Model: 4300W-150S-07, S/N 10223 with Fulton Make Up System - Rigging Fee: $5500

Clean Water Technology GEM/DAF System, S/N 1451 with Pumps Controls and Chemical Feed Tank - Rigging Fee: $3500

Northstar 3 HP Air Compressor with Tank - Rigging Fee: $200

August Fiberglass Company 6,000 Gallon Vertical Tank - Rigging Fee: $1750

6,000 Gallon Vertical Poly Tank - Rigging Fee: $1500

S/S Screener - Rigging Fee: $1500

Gorman Rupp Super T Series Pumps 25 HP and Chart Recorder - Rigging Fee: $850

(1) 2,000 Gallon and (1) 1,000 Gallon Poly Tanks - Rigging Fee: $950

Tri-Clover Positive Displacement Pump with 3" S/S Head, Mounted on S/S Base - Rigging Fee: $250

Ampco Centrifugal Pump with 20 HP 3,510 RPM Motor, Model: C218M13 with 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $200

2-Tank S/S CIP System with Shell & Tube Heat Exchanger, Waukesha Cherry-Burrell Air Valves, (2) Pumps, Chart Recorders, Controls and (2) Full-Guar...

3-Tank S/S CIP System with Shell & Tube Heat Exchanger, Tri-Clover Air Valves, (2) Pumps, Chart Recorders, Controls and (2) Full-Guard Chemical Fe...

Allen-Bradley PanelView 1200 HMI with S/S Enclosure - Rigging Fee: $150

200'+ 2" S/S Pipe with Clamps, Flowverter, Caps (3) Air Valves (In this Bay Only) - Rigging Fee: $1200

2012 Sellers 150 HP Packaged Boiler, Model: 10SE, S/N 104525 with Feed System and Blow Down - Rigging Fee: $3000

Fristam Centrifugal Pump with 3" x 2.5" S/S Head, Clamp-Type - Rigging Fee: $200

Fristam Centrifugal Pump with 15 HP 1,760 RPM Motor, 3" x 2.5" S/S Head, Clamp-Type - Rigging Fee: $200

Centrifugal Pump with 5 HP 1,750 RPM S/S Clad Motor, 3" x 2.5" S/S Head, Clamp-Type - Rigging Fee: $200

Feldmeier 30,000 Gallon Jacketed S/S Silo with (2) Waukesha Cherry-Burrell Air Valves, Chart Recorder, Sensors, S/N A-579-01 and S/S Exterior - Ri...

Walker 30,000 Gallon Jacketed S/S Silo with (2) Waukesha Cherry-Burrell Air Valves, Chart Recorder and Sensors TEST - Rigging Fee: $9500

Feldmeier Aprox. 6,000 Gallon Jacketed S/S Front Horizontal Tank, S/N E-370-99 with Chart Recorder and Valve - Rigging Fee: $8500

100'+ 3" and 2" S/S Pipe with (5) Tri-Clover and Other Air Valves, Check Valves, Clamp and Flowverter (In this Room Only) - Rigging Fee: $850

Fristam Centrifugal Pump, Model: FPR3551-250 with 15 HP 1,755 RPM Motor, 3" x 3" S/S Head, Clamp-Type - Rigging Fee: $200

Fristam Centrifugal Pump, Model: FPR 3551-250 with 15 HP 1,775 RPM Motor, 3" x 3" S/S Head, Clamp-Type - Rigging Fee: $200

Feldmeier 30,000 Gallon Jacketed S/S Silo with (2) Sudmo Pentair Valves, S/N A-700-06 - Rigging Fee: $9500

Feldmeier 30,000 Gallon Jacketed S/S Silo with (2) Sudmo Pentair Valves, S/N A-354-05 - Rigging Fee: $9500

(4) Sudmo Pentair Valves, Flowverter Station and S/S Pipe - Rigging Fee: $600

Walker 12,500 Gallon Jacketed Horizontal S/S Tank with S/S Front and Vertical Agitation, Waukesha Cherry-Burrell and Tri-Clover Air Valves, S/N HH...

Walker 5,500 Gallon Jacketed S/S Tank with S/S Front and Vertical Agitation (PT 1), Waukesha Cherry-Burrell and Tri-Clover Air Valves and Level Se...

Walker 6,500 Gallon Jacketed S/S Tank with S/S Front and Vertical Agitation (PT 4) - Rigging Fee: $6000

Tri-Clover Centrifugal Pump with 7.5 HP 1,760 RPM Leeson Motor and 3" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $200

Tri-Clover Centrifugal Pump with 7.5 HP Motor and 3" x 2" S/S Head, Clamp-Type - Rigging Fee: $200

Tri-Clover Centrifugal Pump with 7.5 HP Reliance Motor and 3" x 2" S/S Head, Clamp-Type - Rigging Fee: $200

Ampco Pump with 7.5 HP 1,770 RPM Baldor Motor and 3" x 2" S/S Head, Clamp-Type - Rigging Fee: $200

SPX and Waukesha Cherry-Burrell 2" S/S 2-Way Air Valves with S/S Pipe, Clamps, Elbows and Check Valves - Rigging Fee: $750

Breddo 300 Gallon S/S Likwifier, Model: LDS with Offset Motor, S/N D-537083 with Air Valve - Rigging Fee: $1500

Fristam 3" x 2" S/S Head Pump with S/S Clad Motor - Rigging Fee: $200

Allen-Bradley PanelView HMI with S/S Enclosure - Rigging Fee: $250

S/S Frame Platform with Steps and Gating - Rigging Fee: $350

Tri-Clover Centrifugal Pump with S/S Clad Motor and 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $200

Fristam Pump, Model: FZ21 with 2" x 1.5" S/S Head, Clamp-Type - Rigging Fee: $200

2,000 Gallon S/S Rectangular Tank with Agitation (BT 1) - Rigging Fee: $3500

2,000 Gallon S/S Rectangular Tank with Agitation (BT 2) - Rigging Fee: $3500

(10) Waukesha Cherry-Burrell Air Valves, Clamps, Elbows and 100+' 2" and 1.5" S/S Pipe (In this Room Only) - Rigging Fee: $850

Tetra Pak 4,500 GPH Pasteurizer with 4-Zone S/S Frame Plate Heat Exchanger, Model: 1, 3 Dividers, Balance Tank, Hydraulic Open and Close Flowmeter...

GAULIN 4,500 GPH Homogenizer - Rigging Fee: $3250

AGC 7,200 GPH Pasteurizer with 5-Zone S/S Frame Plate Heat Exchanger, Model: 4, Dividers, Holding Tube, Balance Tank, Circulating Pump and Control...

GAULIN 7,200 GPH Homogenizer - Rigging Fee: $3750

(10) Sudmo Waukesha Cherry-Burrell S/S Air Valves, Clamps and Meters - Rigging Fee: $950

Allen-Bradley PanelView 1,200 HMI with S/S Enclosure - Rigging Fee: $250

2" S/S Air Valves in Manifold - Rigging Fee: $500

Feldmeier 4,200 Gallon All S/S Jacketed Tank with Horizontal Agitation, S/N A-372-04 - Rigging Fee: $4000