nach Losen suchen

Kürzliche Suchen

    alle löschen

    Vorgeschlagene Suchen

      Anmelden
      Registrieren
      notifications_none notifications Suchaufträge
      Lathes, Drill Presses, EDM Machine, Surface Grinders, Thread Rollers, Air Compressors Screw Machines & Support Equipment
      Auktion beendet
      Alle Auktionen von Capital Recovery Group ansehen
      New York, New York
      Timed Auktion

      Auktionstag(e)

      • Beendet 12. Mai 2021 14:38 ET (19:38 BST)

      Besichtigungstermin(e)

      • 09:00 - 16:00 ET

      Auktionsdetails

      AGB Wichtige Informationen
      Währung: USD
      Aufgeld: 18,00%
      USt. auf den Zuschlagspreis: 8,875%

      Ort der Versteigerung

      308 Dyckman Street, New York, New York, 10034, United States

      Auktionshaus

      als Favorit merken Stellen Sie Ihre Frage phone_in_talk 860-623-9060

      Verfeinern Sie Ihre Suche

      Nur Lose mit Abbildungen
      Nur Massenlose anzeigen

      Schätzpreis

      Sortieren nach Preisklasse

      Kategorie

      Entschuldigung es wurden keine Ergebnisse für 'Search text here' gefunden. Bitte versuchen Sie es mit einer anderen Suche
      • Machines (36)
      Filter entfernen
      Sie sind noch nicht zum Live-Bieten zugelassen. Sie können dennoch Verdeckte Gebote abgeben, die automatisch ausgeführt werden, wenn das Auktionshaus Sie zulässt.
      36 Los(e)

      Sortieren nach:

      • Kategorie
      • Liste
      • Galerie
      • 36 Los(e)
        /Seite

      Dieses Auktionshaus möchte seine Ergebnisse nicht veröffentlichen. Bitte kontaktieren Sie das Auktionshaus bei Fragen direkt.

      Los 150

      Dayton 10 inch D.E. pedestal grinder, 1 HP, 1725 rpm, 1 phase (LOCATED IN TOOL ROOM MACHINE SHOP)

      150Dayton 10 inch D.E. pedestal grinder, 1 HP, 1725 rpm, 1 phase (LOCATED IN TOOL ROOM MACHINE SHOP)
      Capital Recovery Group

      Dayton 10 inch D.E. pedestal grinder, 1 HP, 1725 rpm, 1 phase (LOCATED IN TOOL ROOM MACHINE SHOP) - RIGGING FEE:  $75.00-WILL AUTOMATICALLY BE ADD...

      Los 159

      Elgin (Hardinge) lathe, 9 X 18 inch BC, sn 5/9-1840, with 3-jaw and 4-jaw chucks, tailstock and

      159Elgin (Hardinge) lathe, 9 X 18 inch BC, sn 5/9-1840, with 3-jaw and 4-jaw chucks, tailstock and
      Capital Recovery Group

      Elgin (Hardinge) lathe, 9 X 18 inch BC, sn 5/9-1840, with 3-jaw and 4-jaw chucks, tailstock and compound slide table (LOCATED IN TOOL ROOM MACHINE...

      Los 160

      Logan 6561H engine lathe, 15 X 40 BC, tailstock, center rest, compound slide table, 3 phase (LOCATED

      160Logan 6561H engine lathe, 15 X 40 BC, tailstock, center rest, compound slide table, 3 phase (LOCATED
      Capital Recovery Group

      Logan 6561H engine lathe, 15 X 40 BC, tailstock, center rest, compound slide table, 3 phase (LOCATED IN TOOL ROOM MACHINE SHOP) - RIGGING FEE:  $2...

      Los 161

      Clausing 1301 (1300 series) engine lathe , 16 X 40 BC, tailstock, center rest, compound slide table,

      161Clausing 1301 (1300 series) engine lathe , 16 X 40 BC, tailstock, center rest, compound slide table,
      Capital Recovery Group

      Clausing 1301 (1300 series) engine lathe , 16 X 40 BC, tailstock, center rest, compound slide table, 4 jaw chuck and tool post, 3-phase (LOCATED I...

      Los 165

      Bridgeport vertical milling machine, sn 214040, 1 HP, 9 X 42 inch table with Lyman MK4 power feed,

      165Bridgeport vertical milling machine, sn 214040, 1 HP, 9 X 42 inch table with Lyman MK4 power feed,
      Capital Recovery Group

      Bridgeport vertical milling machine, sn 214040, 1 HP, 9 X 42 inch table with Lyman MK4 power feed, Anram Mini Wizard DRO, with Bridgeport shaping ...

      Los 172

      Cederburg tapping machine and Royersford # 0 table top press (LOCATED IN TOOL ROOM MACHINE SHOP)

      172Cederburg tapping machine and Royersford # 0 table top press (LOCATED IN TOOL ROOM MACHINE SHOP)
      Capital Recovery Group

      Cederburg tapping machine and Royersford # 0 table top press (LOCATED IN TOOL ROOM MACHINE SHOP) - RIGGING FEE:  $150.00-WILL AUTOMATICALLY BE ADD...

      Los 224

      Nilson Fourslide, mn S1F, sn 80670, 1/32 max wire diameter, 1 1/4 max width flat stock, 8 inch

      224Nilson Fourslide, mn S1F, sn 80670, 1/32 max wire diameter, 1 1/4 max width flat stock, 8 inch
      Capital Recovery Group

      Nilson Fourslide, mn S1F, sn 80670, 1/32 max wire diameter, 1 1/4 max width flat stock, 8 inch feed length, 50-200 SPM, with press attachment, aut...

      Los 225

      Nilson Fourslide, mn S-0,, sn 60980, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch

      225Nilson Fourslide, mn S-0,, sn 60980, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch
      Capital Recovery Group

      Nilson Fourslide, mn S-0,, sn 60980, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch feed length, 95-290 SPM, with wire straightener a...

      Los 226

      Nilson Fourslide, mn S-0, sn 85170, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch feed

      226Nilson Fourslide, mn S-0, sn 85170, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch feed
      Capital Recovery Group

      Nilson Fourslide, mn S-0, sn 85170, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch feed length, 95-290 SPM, with wire straightener au...

      Los 227

      Nilson Fourslide, mn 700, sn 98190, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8

      227Nilson Fourslide, mn 700, sn 98190, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8
      Capital Recovery Group

      Nilson Fourslide, mn 700, sn 98190, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8 feed length, 20-540 SPM, with wire straightener, ...

      Los 228

      Nilson Fourslide, mn 700, sn 98180, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8

      228Nilson Fourslide, mn 700, sn 98180, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8
      Capital Recovery Group

      Nilson Fourslide, mn 700, sn 98180, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 3/8 feed length, 20-540 SPM, with wire straightener, ...

      Los 229

      Nilson Fourslide, mn S-00, sn 84540, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch

      229Nilson Fourslide, mn S-00, sn 84540, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch
      Capital Recovery Group

      Nilson Fourslide, mn S-00, sn 84540, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch feed length, 100-500 SPM, with wire straightene...

      Los 230

      Nilson Fourslide, mn S-00, sn 84000, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch

      230Nilson Fourslide, mn S-00, sn 84000, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch
      Capital Recovery Group

      Nilson Fourslide, mn S-00, sn 84000, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch feed length, 100-500 SPM, with wire straightene...

      Los 231

      Nilson Fourslide, mn S-00, sn 45437, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch

      231Nilson Fourslide, mn S-00, sn 45437, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch
      Capital Recovery Group

      Nilson Fourslide, mn S-00, sn 45437, 1/32 max wire diameter, 3/8 inch max width flat stock, 3 inch feed length, 100-500 SPM, with wire straightene...

      Los 232

      Nilson Fourslide, mn S-00, sn 90130, 1/32 max wire diameter, 3/8 max width flat stock, 3 inch feed

      232Nilson Fourslide, mn S-00, sn 90130, 1/32 max wire diameter, 3/8 max width flat stock, 3 inch feed
      Capital Recovery Group

      Nilson Fourslide, mn S-00, sn 90130, 1/32 max wire diameter, 3/8 max width flat stock, 3 inch feed length, 100-500 SPM, with wire straightener, au...

      Los 233

      Nilson Fourslide, mn S-00, sn 54046, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch

      233Nilson Fourslide, mn S-00, sn 54046, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch
      Capital Recovery Group

      Nilson Fourslide, mn S-00, sn 54046, 1/16 max wire diameter, 1 inch max width flat stock, 6 inch feed length, 95-290 SPM, with wire straightener, ...

      Los 234

      Motorized wire straightener, 1 phase (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      234Motorized wire straightener, 1 phase (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Motorized wire straightener, 1 phase (LOCATED ON 1ST FLOOR PRODUCTION AREA) - RIGGING FEE:  $250.00-WILL AUTOMATICALLY BE ADDED TO THE INVOICE .....

      Los 240

      Hartford m/n 000-1000 thread roller, s/n 00-158-7, 1/8 max thread dia, 1” max thread & shank length,

      240Hartford m/n 000-1000 thread roller, s/n 00-158-7, 1/8 max thread dia, 1” max thread & shank length,
      Capital Recovery Group

      Hartford model 000-1000 thread roller, s/n 00-158-7, 1/8 max thread dia, 1” max thread and shank length, 350 – 1000 PPM with vibratory bowl feeder...

      Los 243

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary

      243Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary
      Capital Recovery Group

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary straighteners (LOCATED ON 1ST FLOOR PRODUCTION AREA) -...

      Los 244

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary

      244Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary
      Capital Recovery Group

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary straighteners (LOCATED ON 1ST FLOOR PRODUCTION AREA) -...

      Los 245

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary

      245Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary
      Capital Recovery Group

      Escomatic Model D2 screw machine, coil fed, 3/16 max wire dia, with wire payoffs and rotary straighteners PARTS MACHINE (LOCATED ON 1ST FLOOR PROD...

      Los 249

      Custom lathe with table, 6 X 36 BC (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      249Custom lathe with table, 6 X 36 BC (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Custom lathe with table, 6 X 36 BC (LOCATED ON 1ST FLOOR PRODUCTION AREA) - RIGGING FEE:  $200.00-WILL AUTOMATICALLY BE ADDED TO THE INVOICE ...[...

      Los 251

      Hartford m/n 2-425 High Speed DSSD cold header, 1/8 max wire dia, 1” max shank length, 425 PPM

      251Hartford m/n 2-425 High Speed DSSD cold header, 1/8 max wire dia, 1” max shank length, 425 PPM
      Capital Recovery Group

      Hartford Model 2-425 High Speed DSSD cold header, s/n 5204-206-14, 1/8 max wire dia, 1” max shank length, 425 PPM   (LOCATED ON 1ST FLOOR PRODUCTI...

      Los 252

      Greenbat m/n Mark 3 mini DSSD high speed cold header, 7/64 (2.5mm) max wire dia,

      252Greenbat m/n Mark 3 mini DSSD high speed cold header, 7/64 (2.5mm) max wire dia,
      Capital Recovery Group

      Greenbat Model Mark 3 mini DSSD high speed cold header, 7/64 (2.5mm) max wire dia, .511 (13mm) max shank length, 600 PPM, equipped with AC Inverte...

      Los 253

      Manville m/n 00 DSSD Cold Headers,1/8 max cutoff dia, 1”max shank length, 150 PPM with air feeders

      253Manville m/n 00 DSSD Cold Headers,1/8 max cutoff dia, 1”max shank length, 150 PPM with air feeders
      Capital Recovery Group

      Manville Model #00 DSSD Cold Headers, 1/8 max cutoff dia, 1” max shank length, 150 PPM with air feeders   (LOCATED ON 1ST FLOOR PRODUCTION AREA) -...

      Los 254

      Manville m/n 00 DSSD Cold Headers1/8 max cutoff dia, 1"max shank length 150 PPM with air feeders

      254Manville m/n 00 DSSD Cold Headers1/8 max cutoff dia, 1"max shank length 150 PPM with air feeders
      Capital Recovery Group

      Manville Model #00 DSSD Cold Headers, 1/8 max cutoff dia, 1” max shank length, 150 PPM with air feeders   (LOCATED ON 1ST FLOOR PRODUCTION AREA) -...

      Los 255

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      255Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM  (LOCATED ON 1ST FLOOR...

      Los 256

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      256Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 257

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      257Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 258

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      258Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 259

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      259Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 260

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      260Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 261

      Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)

      261Bundgrens USS cold forming pin making machine (LOCATED ON 1ST FLOOR PRODUCTION AREA)
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 262

      Bundgrens USS cold forming pin making machine (FOR PARTS) (LOCATED ON 1ST FLOOR PRODUCTION

      262Bundgrens USS cold forming pin making machine (FOR PARTS) (LOCATED ON 1ST FLOOR PRODUCTION
      Capital Recovery Group

      Buendgens Model USS pin making machines  wire range from .012 - .050”, length range from .400” – 2.360”, Speed up to 500 PPM (LOCATED ON 1ST FLOOR...

      Los 346A

      Lot of (3) Alviti jewelery link machines with Syntron bowl feeders (LOCATION: 2ND FLOOR)

      346ALot of (3) Alviti jewelery link machines with Syntron bowl feeders (LOCATION: 2ND FLOOR)
      Capital Recovery Group

      Lot of (3) Alviti jewelery link machines with Syntron bowl feeders (LOCATION: 2ND FLOOR) - RIGGING FEE:  $250.00-WILL AUTOMATICALLY BE ADDED TO TH...

      Los 367

      Empire Safe 2D combination lock safe, 66 inches high X 40 inches wide X 30 inches deep (LOCATION:

      367Empire Safe 2D combination lock safe, 66 inches high X 40 inches wide X 30 inches deep (LOCATION:
      Capital Recovery Group

      Empire Safe 2D combination lock safe, 66 inches high X 40 inches wide X 30 inches deep (LOCATION: 2ND FLOOR) - RIGGING FEE:  $350.00-WILL AUTOMATI...

      Loading...Loading...
      • 36 Los(e)
        /Seite

      Kürzlich aufgerufene Lose