Los

1

BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL.

In NATIONAL FALL CONSIGNMENT AUCTION FEATURING NE...

Diese Auktion ist eine LIVE Auktion! Sie müssen für diese Auktion registriert und als Bieter freigeschaltet sein, um bieten zu können.
Sie wurden überboten. Um die größte Chance zu haben zu gewinnen, erhöhen Sie bitte Ihr Maximal Gebot.
Ihre Registrierung wurde noch nicht durch das Auktionshaus genehmigt. Bitte, prüfen Sie Ihr E-Mail Konto für mehr Details.
Leider wurde Ihre Registrierung durch das Auktionshaus abgelehnt. Sie können das Auktionshaus direkt kontaktieren über (626) 444-0311 um mehr Informationen zu erhalten.
Sie sind zurzeit Höchstbieter! Um sicherzustellen, dass Sie das Los erfolgreich ersteigern, loggen Sie sich erneut ein, bevor die Versteigerung des Loses am schließt, um Ihr Maximalgebot zu erhöhen.
Geben Sie jetzt ein Gebot ab! Ihre Registrierung war erfolgreich.
Entschuldigung, die Gebotsabgabephase ist leider beendet. Es erscheinen täglich 1000 neue Lose auf lot-tissimo.com, bitte starten Sie eine neue Anfrage.
Das Bieten auf dieser Auktion hat noch nicht begonnen. Bitte, registrieren Sie sich jetzt, so dass Sie zugelassen werden bis die Auktion startet.
1/4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 1 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 2 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 3 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 4 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 1 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 2 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 3 aus 4
BRAND NEW 1.000” x 120” BERTSCH MODEL FR #14-10, PLATE BENDING *WARRANTY* LOC.-Rockford, IL. - Bild 4 aus 4
Das Auktionshaus hat für dieses Los keine Ergebnisse veröffentlicht
South El Monte, California
10,00%
18,00%

NEW LIST PRICE....... $310,000
LOCATED:  650 Race St. Rockford IL.

1.000” x 120” BERTSCH PLATE ROLL

INCLUDED:

Console Mounted Control with Electronic Speed Control (in lieu of hand-held pendant)

WARRANTY

FEATURES & BENEFITS

  

RECTILINEAR GUIDES

 

All Bertsch Rolls are equipped with Rectilinear Guides for the purpose of guiding the bottom and side rolls up and down. 

 

  • Rectilinear Guides allow the force of the hydraulic cylinders to be translated directly to the work piece.  There are no load-bearing wear points that could affect parallelism and accuracy.  This leads to long service life, consistent parts, and low maintenance.  Accuracy and parallelism are further enhanced using Bertsch’s unique electronic leveling system that allows roll corrections on both ends of the roll. 

 

  • Other technologies such as Planetary Swing Guides use a lever arm concept that transmits the force through pins and bearings.  These pins and bearings are subject to wear and therefore a loss of parallelism and accuracy.

 

  • Bertsch rectilinear guides have greater surface area than competitive rolls, assuring long service life with low required maintenance.

 

HIGHER CAPACITY

 

Bertsch Rolls have higher capacities than “equivalent” competitive rolls:

 

  • Bertsch sizes its rolls for bending ASTM A36 material.  A36 has a minimum yield strength of 36,000 psi.  However, the specification has no upper limit, and most A36 steel has yield strength of significantly more than this minimum specification.  Because of this, Bertsch sizes its rolls for material with a yield strength of 49,000 psi.

 

  • Most competitive rolls show technical specifications that are based on a yield strength of only 37,000 psi.  This barely covers the minimum specification for A36, and certainly does not have a reasonable factor of safety for steel conforming to this standard.

 

  • Bertsch rolls are capable of forming maximum material thicknesses to much smaller diameters than most competitors.  While most manufacturers specify a minimum roll diameter of 5x top roll diameter for maximum thickness and width, Bertsch rolls are capable of rolling maximum thickness and width to 1.5 times top roll diameter.  In many cases, the next size smaller Bertsch roll has the same rolling capacity as a competitor’s roll.

 

MORE PRE-BEND

 

  • Bertsch Rolls are rated to pre-bend to the maximum rolling capacity of the machine.
  • Most competitors specify separate pre-bend and rolling capacities, with pre-bending capacities in the range of 75% of rolling capacity.

STANDARD EQUIPMENT

 

This proposal describes the Bertsch FR #14-10 Four Roll Bending Cell, per attached specifications, for 460/3/60 volt incoming power including:

  • Base machine with customized crowned roll forgings, adaptable to your specific rolling needs.
  • Pressure gauges to monitor pinch pressure on both ends of the machine to monitor part squareness.
  • Four digital readouts, one for each side roll, and two for the pinch roll.
  • Spherical roller bearings that increase the drive’s efficiency by reducing friction
  • Electronic leveling system allowing rolls to be adjusted on either end of the roll.
  • Hard hydraulic tubing throughout the entire machine to reduce potential leaks and prevent loss of accuracy from expansion and contraction of hoses.  Hoses are limited to areas requiring a flexible connection.
  • Variable speed differential with independently driven top and bottom rolls.  This allows the rolls to seek their own speed when driving on the inner and outer radius.
  • Console Mounted Control with Electronic Speed Control
  • Electrical disconnect with lock-out feature, estop button on control, and trip switch located along both sides of the machine for operator safety.
  • Independent high efficiency planetary gear reduction units directly coupled to the top and pinch roll forgings
  • Automatic self-locking hinge actuated by hydraulic cylinder
  • Full set of operator manuals and documentation.
  • Nominal Rolling Capacity (Multi-pass)-------------------               1.000” x 120”  x 25.5” (dia)

                                                                                                             based on 49,000 psi yield strength

    Nominal Rolling Capacity (Single-pass)-----------------               0.750” x 120” x 18.9” (dia)

                                                                                                             based on 49,000 psi yield strength

    Nominal Pre-Bend Capacity---------------------------------                1.000” x 120” x 25.5” (dia)

                                                                                                             based on 49,000 psi yield strength

    Roll Width -------------------------------------------------------                                  122”

    Material Thickness:

          Maximum (at reduced width – see chart)----------------                                3.000”

     

    Top and Pinch Roll Diameter-------------------------------                                 17.0”

     

    Side Roll Diameter---------------------------------------------                                 14.0”

     

    Roll Hardness---------------------------------------------------                                45 RC

     

    Motor Horsepower---------------------------------------------                                40 HP

     

    Rolling Speed---------------------------------------------------                             14 ft / min


NEW LIST PRICE....... $310,000
LOCATED:  650 Race St. Rockford IL.

1.000” x 120” BERTSCH PLATE ROLL

INCLUDED:

Console Mounted Control with Electronic Speed Control (in lieu of hand-held pendant)

WARRANTY

FEATURES & BENEFITS

  

RECTILINEAR GUIDES

 

All Bertsch Rolls are equipped with Rectilinear Guides for the purpose of guiding the bottom and side rolls up and down. 

 

  • Rectilinear Guides allow the force of the hydraulic cylinders to be translated directly to the work piece.  There are no load-bearing wear points that could affect parallelism and accuracy.  This leads to long service life, consistent parts, and low maintenance.  Accuracy and parallelism are further enhanced using Bertsch’s unique electronic leveling system that allows roll corrections on both ends of the roll. 

 

  • Other technologies such as Planetary Swing Guides use a lever arm concept that transmits the force through pins and bearings.  These pins and bearings are subject to wear and therefore a loss of parallelism and accuracy.

 

  • Bertsch rectilinear guides have greater surface area than competitive rolls, assuring long service life with low required maintenance.

 

HIGHER CAPACITY

 

Bertsch Rolls have higher capacities than “equivalent” competitive rolls:

 

  • Bertsch sizes its rolls for bending ASTM A36 material.  A36 has a minimum yield strength of 36,000 psi.  However, the specification has no upper limit, and most A36 steel has yield strength of significantly more than this minimum specification.  Because of this, Bertsch sizes its rolls for material with a yield strength of 49,000 psi.

 

  • Most competitive rolls show technical specifications that are based on a yield strength of only 37,000 psi.  This barely covers the minimum specification for A36, and certainly does not have a reasonable factor of safety for steel conforming to this standard.

 

  • Bertsch rolls are capable of forming maximum material thicknesses to much smaller diameters than most competitors.  While most manufacturers specify a minimum roll diameter of 5x top roll diameter for maximum thickness and width, Bertsch rolls are capable of rolling maximum thickness and width to 1.5 times top roll diameter.  In many cases, the next size smaller Bertsch roll has the same rolling capacity as a competitor’s roll.

 

MORE PRE-BEND

 

  • Bertsch Rolls are rated to pre-bend to the maximum rolling capacity of the machine.
  • Most competitors specify separate pre-bend and rolling capacities, with pre-bending capacities in the range of 75% of rolling capacity.

STANDARD EQUIPMENT

 

This proposal describes the Bertsch FR #14-10 Four Roll Bending Cell, per attached specifications, for 460/3/60 volt incoming power including:

  • Base machine with customized crowned roll forgings, adaptable to your specific rolling needs.
  • Pressure gauges to monitor pinch pressure on both ends of the machine to monitor part squareness.
  • Four digital readouts, one for each side roll, and two for the pinch roll.
  • Spherical roller bearings that increase the drive’s efficiency by reducing friction
  • Electronic leveling system allowing rolls to be adjusted on either end of the roll.
  • Hard hydraulic tubing throughout the entire machine to reduce potential leaks and prevent loss of accuracy from expansion and contraction of hoses.  Hoses are limited to areas requiring a flexible connection.
  • Variable speed differential with independently driven top and bottom rolls.  This allows the rolls to seek their own speed when driving on the inner and outer radius.
  • Console Mounted Control with Electronic Speed Control
  • Electrical disconnect with lock-out feature, estop button on control, and trip switch located along both sides of the machine for operator safety.
  • Independent high efficiency planetary gear reduction units directly coupled to the top and pinch roll forgings
  • Automatic self-locking hinge actuated by hydraulic cylinder
  • Full set of operator manuals and documentation.
  • Nominal Rolling Capacity (Multi-pass)-------------------               1.000” x 120”  x 25.5” (dia)

                                                                                                             based on 49,000 psi yield strength

    Nominal Rolling Capacity (Single-pass)-----------------               0.750” x 120” x 18.9” (dia)

                                                                                                             based on 49,000 psi yield strength

    Nominal Pre-Bend Capacity---------------------------------                1.000” x 120” x 25.5” (dia)

                                                                                                             based on 49,000 psi yield strength

    Roll Width -------------------------------------------------------                                  122”

    Material Thickness:

          Maximum (at reduced width – see chart)----------------                                3.000”

     

    Top and Pinch Roll Diameter-------------------------------                                 17.0”

     

    Side Roll Diameter---------------------------------------------                                 14.0”

     

    Roll Hardness---------------------------------------------------                                45 RC

     

    Motor Horsepower---------------------------------------------                                40 HP

     

    Rolling Speed---------------------------------------------------                             14 ft / min


NATIONAL FALL CONSIGNMENT AUCTION FEATURING NEW AND USED CHIPMAKING AND FABRICATING MACHINERY & EQUIPMENT

Endet ab
Ort der Versteigerung
Various Locations
Various Locations
California
Illinois
United States

Für MRI Auctions in conjunction with Sterling Machinery Versandinformtation bitte wählen Sie (626) 444-0311.

Wichtige Informationen

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.

MULTIPLE LOCATIONS BEING AUCTIONED

Fabricating Showroom:
9310 Garvey Ave.
South El Monte, CA 91733
View Map Location

Chipmaking Showroom
10807 Rush St.
South El Monte, CA 91733
View Map Location

Location of lots 130-154
Are Located at 590 Bond St, Lincolnshire, IL 60069 (Free Loading)

AGB

GENERAL TERMS AND CONDITIONS:

1. Buyer is required to maintain a 25% deposit on all items purchased at The auction. This is a nonrefundable deposit and will be forfeited in the event that a Buyer fails to close. Payments are accepted in the form of CASH, CASHIER`S CHECK made payable to Machinery Resources International, WIRE TRANSFER, or BUSINESS CHECK accompanied by an APPROVED BANK LETTER OF GUARANTEE payable to Machinery Resources International ONLY. NO EXCEPTIONS. All bidding and invoicing will be in US Dollars ($); the above approved forms of payment must be made in US currency. ALL INVOICES MUST BE PAID WITHIN 24 
HOURS OR THE DEPOSIT WILL BE FORFEITED TO AUCTIONEER.

2. A DEPOSIT MAY BE REQUIRED TO REGISTER AND TO PARTICIPATE IN THE AUCTION. 

3. A premium of 18% of the bid price will be added to the price of each item purchased. The buyer`s premium for each sale will be announced at the time of the auction. Taxes are calculated AFTER the buyer`s premium. Note: Buyer`s premium online generally differs from onsite. The Buyer`s Premium percentage will be posted on the website or announced by the auctioneer.


4. ALL SALES ARE FINAL. NO EXCEPTIONS. The condition of the merchandise being offered varies. Buyer understands and agrees:(a) that any description or sample of the merchandise given or furnished by Auctioneer is solely for identification, and does not create any warranty, express or implied, that the merchandise actually conforms to such description or sample; (b) that all merchandise is purchased and accepted by Buyer "AS IS-WHERE IS," `IN PLACE" and "WITH ALL FAULTS, KNOWN AND UNKNOWN.`` AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, QUANTITY, CONDITION, LOCATION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, FITNESS FOR A PARTICULAR PURPOSE OR OTHER SPECIFICATIONS. MANUFACTURERS WARRANTIES MAY BE IN EFFECT. NO SALE SHALL BE INVALIDATED AND AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT OR OTHERWISE. Descriptions have been prepared for guide purposes only and shall not be relied upon by Buyer for accuracy or completeness. By submitting a bid, Buyer/Bidder affirms it has inspected all items or has waived its right to do so prior to bidding Buyers shall be deemed to have relied entirely upon their own inspections and investigations.

5. Buyers will be charged all applicable taxes unless SATISFACTORY PROOF OF EXEMPTION is provided to Auctioneer prior to payment. lf satisfactory proof is not provided, Buyer will pay all applicable taxes to Auctioneer. No taxes will be refunded once the tax has been collected. Proof of exemption, subject to approval by Auctioneer, includes VALID RESELLER`S PERMITS, STATE ISSUED LETTERS OF EXEMPTION, BILLS OF LADING provided by shipper for OUT-OF-STATE SHIPMENTS only, and any other documents as governed by applicable local, state, and federal laws deemed acceptable at Auctioneer`s sole discretion. Taxes are calculated AFTER the buyer`s premium.

6. All articles will be sold to the highest bidder conforming to the bid process. Auctioneer reserves the right to sell articles by individual group lots and "En Bloc" as he deems appropriate. Auctioneer reserves the right to group, reduce, add to or delete lots. Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. in the event there is a dispute between two or more claims of entitlement as the successful bidder, Auctioneer reserves the right to re-auction the item in dispute. Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. Auctioneer shall be entitled to make changes in (the composition of) the lots or to withdraw them, up until the last moment before the sale, refuse bids without having to state the reasons, in which case the previous bidders shall be bound to their bids, and to correct himself. Auctioneer reserves the right to sell subject to reserve and to purchase for its own account or of others, whether by verbal or written proxy, all subject to prior sale. All sales shall be concluded on the fall of the hammer or as indicated by Auctioneer and no Buyer may thereafter revoke his bid.

7. Any announcements made on the day of the auction take precedence over catalogue or other previously announced or documented information, but do not alter in any way the basic terms and conditions of sale. Machinery Resources International reserves the right to correct any mistakes or typographical errors made by itself or on its behalf in any of its announcements or documents.

8. No checkout will be permitted during the auction sale. All invoices must be paid in full before merchandise will be released from the premises. Unless Auctioneer determines otherwise at its sole discretion, checkout will begin on the day following the auction sale. Quantities must be checked before removal of purchases. No allowances will be made for claims or shortages once items are removed from the Auction premises. Unless Auctioneer determines otherwise at its sole discretion, no item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale. Where available, documents of transfer, including motor vehicle ownership documents, will be provided within 7 days following the auction or as soon thereafter as such documents are available. Machinery Resources International makes no warranties that such documents will be available. Any available titles shall not pass to Buyer until full payment is received. 

9. All property must be paid for and picked up in the time frames announced by Auctioneer at time of sale. lf not, the merchandise will be deemed abandoned and Buyer will lose any right, title or interest Buyer may have acquired and the merchandise shall revert and repossess to Auctioneer without further notice to Buyer and Buyer`s deposit will be forfeited. No purchaser may assign, transfer, or dispose of his rights in any article purchased before he has paid the purchase price in full. No reselling will be allowed from the premises.

10. lf an applicable conditions are not complied with by Buyer, then, in addition to any other remedies available to Auctioneer, including and without limitation, the right to hold Buyer liable for the total purchase price, Auctioneer may, at its option, (a) cancel the sale, retaining all payments made by Buyer, including any deposit made, as liquidated damages and/or (b) resell the merchandise at public auction in which event Buyer will be liable for the cost of removing and reselling the abandoned merchandise, for any deficiency between Buyer`s original purchase price and subsequent resale price, Auctioneer`s commission, interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum of $2.00/sq.ft. per month) and all other expenses related to the disposal or reselling of the abandoned property. In addition, Auctioneer may retain any merchandise purchased at auction by a defaulting Buyer as collateral security for Buyer`s obligations to Auctioneer.

11. Buyer is solely responsible to provide any personnel, equipment or material needed to pick up purchases and shall assume all responsibility for the removal of any item of property purchased at the sale and any and all risks associated with such removal including, without limitations, the responsibility for providing LICENSED AND BONDED professionals to ensure proper water, gas and/or power disconnection, disassembly, removal and loading, and full financial responsibility for any damage or liability to persons or property resulting from any negligent act or omission of Buyer or Buyer`s employees, agents and/or representatives during pick-up and removal.

12. Buyer agrees that in the event purchased merchandise contains any environmental hazards, toxic waste or other type of hazardous material in any form whatsoever, Buyer shall provide evidence that Buyer or its representatives are licensed for such removal and shall comply with all applicable local, state and/or federal rules, laws and regulations. Auctioneer, its agents or representatives will not be responsible for its containment, storage or removal.

13. Persons in attendance during inspection, sale or removal of merchandise assume all risks of damage or loss to persons, property, or merchandise and shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by Auctioneer, and local, state and federal regulations. Auctioneer, its agents, its employees and representatives shall not be liable by reason of any defect in or about the condition of the premises on which the auction is held. Buyer specifically releases Auctioneer, its agents and representatives from all liability thereof.

14. All risk loss shall pass to Buyer at the time of payment. lf Auctioneer is unable to deliver an article sold to Buyer due to fire, theft, or any other reasons whatsoever, Auctioneer shall reimburse Buyer for all monies paid to Auctioneer in respect to the article and Auctioneer shall have no further liability to the purchaser arising from or relating to such loss, including without limitation any damages for loss of profits.

15. In no event shall Auctioneer`s liability to Buyer exceed the purchase price actually paid, A Buyer`s claim shall be limited to the amount paid for the merchandise, and shall not extend to any obligation; risk; liability; right; claim; remedy for loss of use, revenue or profit; liability of Buyer to any third party; personal injury; or any other direct, indirect, incidental or consequential damages. Auctioneer is acting as an agent only and is not responsible for the acts of its principles. 

16. Buyer agrees to indemnify, defend and hold harmless Auctioneer and its agents and representatives, from any and all demands, claims, losses, damages and liabilities (including attorneys` fees) asserted against, resulting to or imposed upon Auctioneer resulting from the negligence of Buyer or his/her employees, agents and representatives, while in, at or about the auction premises during inspection, sale or removal of merchandise. 

17. Machinery Resources International shall have the right to make image and audio video recordings of the auction, to use said recordings at its own discretion, and if deemed appropriate to make this public. Participants give their permission by participating in the auction.

18. The bidder`s paddle is nontransferable. All bids made by the holder of the paddle will be Buyer`s responsibility. A successful bid at auction constitutes a legally binding contract of sale. Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending the auction and may revoke such privilege of bidding or attending the auction AT ANY TIME.

19. This sales transaction shall be governed by and construed in accordance with the local laws of the State of California, USA. lf any provision of these Terms and Conditions shall be held invalid, illegal, unenforceable or inoperative, the balance of Terms and Conditions shall remain in full force and affect as if such provisions had not been included. These Terms and Conditions with any amendments or modifications expressly made by Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of articles at this auction. There are no representations, warranties, terms, conditions, undertakings or collateral agreements except as herein provided. 

20. All Buyers acknowledge and accept by their bid at auction the Terms and Conditions of Sale printed on this registration card/bidder paddle. ALL SALES ARE FINAL! NO REFUNDS OR EXCHANGES!

Vollständige AGBs