Los

1

Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION)

In MAZAK H-12 Horizontal Machining Center w/ FANU...

Diese Auktion ist eine LIVE Auktion! Sie müssen für diese Auktion registriert und als Bieter freigeschaltet sein, um bieten zu können.
Sie wurden überboten. Um die größte Chance zu haben zu gewinnen, erhöhen Sie bitte Ihr Maximal Gebot.
Ihre Registrierung wurde noch nicht durch das Auktionshaus genehmigt. Bitte, prüfen Sie Ihr E-Mail Konto für mehr Details.
Leider wurde Ihre Registrierung durch das Auktionshaus abgelehnt. Sie können das Auktionshaus direkt kontaktieren über 405-408-2504 um mehr Informationen zu erhalten.
Sie sind zurzeit Höchstbieter! Um sicherzustellen, dass Sie das Los erfolgreich ersteigern, loggen Sie sich erneut ein, bevor die Versteigerung des Loses am schließt, um Ihr Maximalgebot zu erhöhen.
Geben Sie jetzt ein Gebot ab! Ihre Registrierung war erfolgreich.
Entschuldigung, die Gebotsabgabephase ist leider beendet. Es erscheinen täglich 1000 neue Lose auf lot-tissimo.com, bitte starten Sie eine neue Anfrage.
Das Bieten auf dieser Auktion hat noch nicht begonnen. Bitte, registrieren Sie sich jetzt, so dass Sie zugelassen werden bis die Auktion startet.
1/24
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION)
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 1 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 2 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 3 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 4 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 5 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 6 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 7 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 8 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 9 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 10 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 11 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 12 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 13 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 14 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 15 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 16 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 17 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 18 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 19 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 20 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 21 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 22 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 23 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION)
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 1 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 2 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 3 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 4 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 5 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 6 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 7 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 8 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 9 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 10 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 11 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 12 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 13 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 14 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 15 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 16 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 17 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 18 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 19 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 20 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 21 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 22 aus 23
Mazak H-12 Horizontal Machining Center w/ Fanuc 6MB Control (SEE DESCRIPTION) - Bild 23 aus 23
Das Auktionshaus hat für dieses Los keine Ergebnisse veröffentlicht
Oklahoma City , Oklahoma
8,375%
15,00%

- CAT40 30 Tool Magazine (No Tools Included)

- Equipped w/ Pallet Changer & Includes 2 Pallets

- Converted to Load Programs Through Hyperterminal on Localized PC (Original Tape Drive Works!)

- All Manuals, Tombstones, & Retention Studs Included

- Used Exclusively for Training Since 1996

- For Any Questions, or To Schedule a Demo, Call Barrett Bray @ (405) 408-2504

 

SPECIAL TERMS

Winning bidder must use an approved rigging service for removal of machine. To view a quote, click here.

For any questions, or to schedule a showing, contact Barrett Bray w/ Bray Auctions @ 405.888.5366.

 

 

- CAT40 30 Tool Magazine (No Tools Included)

- Equipped w/ Pallet Changer & Includes 2 Pallets

- Converted to Load Programs Through Hyperterminal on Localized PC (Original Tape Drive Works!)

- All Manuals, Tombstones, & Retention Studs Included

- Used Exclusively for Training Since 1996

- For Any Questions, or To Schedule a Demo, Call Barrett Bray @ (405) 408-2504

 

SPECIAL TERMS

Winning bidder must use an approved rigging service for removal of machine. To view a quote, click here.

For any questions, or to schedule a showing, contact Barrett Bray w/ Bray Auctions @ 405.888.5366.

 

 

MAZAK H-12 Horizontal Machining Center w/ FANUC 6MB Control

Endet ab
Ort der Versteigerung
Francis Tuttle Technology - Bruce Gray Center
3500 NW 150th St
Oklahoma City
Oklahoma
73134
United States

Für Bray Auctions Versandinformtation bitte wählen Sie 405-408-2504.

Wichtige Informationen

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.

 

AGB

 

Terms & Conditions:

Terms: Buying AS-IS WHERE-IS with no contengencies, warranties or returns of any kind.

 

*ONLINE BIDDERS:(on internet)

 

       • 15% Buyer's Premium 

Absentee/Proxy bids accepted when approved by auction company. All checks must clear before titled vehicls leave the premises. 

 

Bray Auctions, LLC is not responsible for any lost, stolen or misplaced items or accidents of any kind. The buyer is responsible for payment once deemed winning bidder.

 

Wire Instructions: (Contact Auction Company)

 

Everything sold AS-IS, WHERE- IS, and with all faults without any warranties expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warrantees or guarantees as to the accuracy of the information herein contained. Bidders are encouraged to thoroughly inspect the items in which they intend to bid prior to sales. Absolutely no items will be removed until auction is completed. Subject to additions, deletions, prior sale and confirmation. Buyer Registration is to be completed in full online. A Credit card must be used for registration purposes ONLY. 

 

 In default of payment of invoices in full within the stated time, Bray Auctions, LLC may retain all  funds received as deposit as liquidated damages. Lots not paid for or removed within the time allowed may be resold at public or private sale without further notice. Any deficiencies and other expenses of resale will be charged to the defaulting purchaser. The equipment must be removed by authorized riggers and contractors only. Riggers must present Bray Auctions, LLC with a valid commercial general liability insurance certificate in a minimum amount of $1,000,000.00 combined single limit per occurrence. Any hydraulic fluid removal and/or oil leaks are the undersigned`s responsibility to remove and clean up. The undersigned purchaser and/or rigger/contractor must take full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment or any hazardous wastes or substances as defined in applicable Federal, State, and Local Statues, Regulations, Rules, or Ordinances.

 

For Questions, contact Bray Auctions, LLC @ (405) 888-5366 or info@bidbray.com

Vollständige AGBs