Lot

48

Large lot of assorted Air Fittings in brass

In Assets Of Triumph Weld & Fab

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-971-8265 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Large lot of assorted Air Fittings in brass
Auctioneer has chosen not to publish the price of this lot
Hamilton, Ontario
0%
Large lot of assorted Air Fittings in brass
Large lot of assorted Air Fittings in brass

Assets Of Triumph Weld & Fab

Ends from
Venue Address
349 Arvin Avenue
Hamilton
Ontario
L8E2M4
Canada

For Stronghold Equipment delivery information please telephone 905-971-8265.

Important Information

WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire

 

4 X CNC Machines (VMCs & lathe)

2004 FADAL MODEL VMC4020A CNC Vertical Machining Center - Axis Travels: X-40" Y-20" Z-20" - 20" x 48" T-Slotted Table

Kitamura Mycenter 3 CNC Vertical Machining Center - 42 x 18 inch table with 33 x 18 inch travel - CAT40 tooling with Yasnac control and manuals

2006 SNK Nissin Prodigy model MAX-410V CNC Bridge style Vertical Machining Center - with Fanuc OI-MB controller & 32 x 18 inch table

1997 Mazak CNC SLANT BED LATHE, MAZAK QUICKTURN MDL. QT-N-20-UNIV, Mazatrol T Plus CNC control

Lots of MINT 6" and 8" Machine Vise fully swivels and tilting units

Haas 4th Axis CNC Rotary Table with 8" diameter face - with S5C Haas Controller

Lot of CAT40 tooling for CNC Machines

 

WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire

 


Machine Shop & Fabrication Equipment

Holzman Initial Pinch Plate Roll - Electric Slip Roll 3/16" capacity - 4.75" roll diameter - 220V 3 phase with foot pedal control - MINT /

Holzman Pyramid Angle Rolls - Tube Bender with hydraulic auto-clamping - 220V 3 phase with foot pedal control - MINT / UNUSED UNIT

Holzman Pyramid Angle Rolls - Tube Bender - 220V 3 phase with foot pedal control - MINT / UNUSED UNIT

Hyd-Mech S-20 Horizontal Band Saw 13x18" cutting capacity

Baxter Horizontal Band Saw model 260 - 10 x 13" cut

2 X First Vertical & Horizontal Milling Machine - 10 x 50 inch Table with Heidenhain digital readout (DRO), 40 taper, air draw bar - MINT UNIT -
complete with over arm supports

Standard Modern Engine Lathe Series 2000 - 11" Swing - 20" between centers with some tooling

Omni Horizontal Band Saw - 7x10 inch capacity with GEAR DRIVEN MOTOR - MINT & Unused - 220V

Clausing Gear Head Drill Press - 220V 3 phase - variable speed unit 1740-3480 RPM - MINT DRILL PRESS

Ridgid 1224 Pipe Threader with 1/8" to 4" capacity with both dies - complete with cutter, die, reamer and foot pedal

2 X Wilton Belt & Disc Sander with 10" disc & 6x13" belt - single phase - Mint / unused SANDER

Bewo Cold Cut Chop Saw

2 X Wilton Cold Saw - 2HP 220V 3 phase with coolant pump - MINT UNUSED UNIT

 


WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire

 

 

Air Compressor Packages - up to 200 HP!!

2010 Ingersoll Rand 200HP Rotary Screw Air Compressor model IRN200N-CC COMPLETE with 2400 CFM Air Dryer, surge protector unit AND 2000 Gallon
Tank - MINT PACKAGE

Atlas Copco GA37 FF - 50HP Air Compressor - Elekronikon digital controller with built in AIR DRYER

Kaeser CS121 100HP Rotary Screw Air Compressor - 458 CFM

Kaeser model KRD-500 500CFM Compressed Air Dryer

Ingersoll Rand model T30 - 10HP Air compressor with horizontal pressure tank

Comairco Airtek Compressed Air Dryer - 100 CFM

Summit Thermaphase Oil / Water Separator Unit model TP-54-SS

 

 

Welding Equipment - 12 X Welders and Welding Systems and accessories

4 X 2001-2004 Fanuc Arcmate 100i & 120iB Welding Robot with RJ3 Controllers, teach pendant controls, Lincoln Powerwave 455M welding power source
450AMP with Lincoln feeder and gun COMPLETE MINT Robotic welder

2 X Miller Syncrowave 350 LX Tig Welder with Miller Coomate 4 welding water cooler, tig gun and foot pedal control

4 X Miller Millermatic 300 Mig Welder 300 amp with MIG GUN & Built in wire feeder

2 X Lincoln Ranger 250 Portable Gas Welder / Generator on cart with casters - portable

4 X 2014 Torit Fume Extractor with long reach snorkel arm type - 120V single phase - MINT & UNUSED - CLEAN FILTER

Verner model VD-1500 WELDING POSITIONER 1500lbs capacity - tilt and rotate with variable speed drive and teach pendant controller with 27" table
- UNUSED AND MINT 220V

Verner model VD-8000 WELDING POSITIONER 8000lbs capacity - tilt and rotate with variable speed drive and teach pendant controller with 55" table
- UNUSED AND MINT 220V

BRAND NEW Welding Positioner 10,000lbs Capacity tilting unit - MINT & new condition

Verner model VX-10000 Power tank rolls - Powered turning roll and idler 10000lbs capacity- UNUSED AND MINT 220V

3 X Acorn Welding Tables

TONS of welding accessories including brand new BESSEY CLAMPS

 

 

Material Handling

2 X robotic handling units - Fanuc S-430iW Handling Robot with RJ3 controller, teach pendant, and cables - FULLY FUNCTIONING RJ3 controlled
Fanuc robot

6 X Hyster and Yale forklifts as new as 2009 - 5000lbs to 8000lbs capacity - 3-stage mast, sideshift and more (empty tanks included)

6 X Hydraulic Lift Table / Platforms up to 4000lbs capacity - Southworth, Blue Giant, Pentalift

Genie Runabout GR-15 Selft Propelled Electric Aerial Work Platform - 500lbs capacity - 15' lift - with charger

BRAND NEW Enerpac hydraulic jacks up to 100 ton!

4 X Mint Richard Wilcox Chain hoists up to 5 TON! with 30' chain.

 

 

Miscellaneous

16 X Industrial Tool Cabinets and Desks up to 35 drawer units - MINT

2 X Mint Hilman roller skates

4 X MINT Digital Crane Scale up to 40,000lbs 20 ton Capacity - complete with remote control and charging unit - brand new scale

Brand new FOWLER Digital calipers up to 40" plus lots more metrology and inspection

6 X Tipster dump hoppers and 4 X liquid waste containers plus STEEL PLATE 3/4"

Tons of Hydraulic equipment - jacks, powerpacks, hand pumps, foot pedals and more!

Maximart Sinker V-25 EDM machine 19x31" Electrolytic fluid tank, 5x10" magnet, model V-Puls controller

Maximart Sinker V-20 EDM machine 16" x 23" Electrolytic fluid tank, 10x16" magnet

Industrial 2-door Cabinet with 2 shelves and large assortment of electrical fuses

Fuller Ultraviolet Light Cabinet - 120V model 484824 - 30" deep x 48" wide x 50" tall

2005 LAURIER HA-250 AUTOMATED EPOXY DIE BOND SORTER with OPTEM ZOOM 70 Lens and tons of acceossories

Spartec Drill/Cutter model AS 70/50 1500RPM

Wise Industries model W001 Rotating Parts Machine Rinser

WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat

· Available Monday – Friday, 8:00am – 12:00am ET.
· Email: Support@bidspotter.com
· Office: 253-858-6777
· Frequently Asked Questions

Terms and Conditions

Stronghold Equipment TERMS & CONDITIONS – FOR ALL AUCTIONS 

1. IDENTIFICATION: All participants are required to register prior to becoming an “Approved Bidder.” All Participants are required to give full name; permanent street address (P.O. Boxes will NOT be accepted or approved); phone number(s); email address, valid credit card and business name and banking information. Subsequent to registration on Bidspotter, approval to bid is at our discretion. 

2. DEPOSITS: All Online Registrants will be required to submit the requested Information, including: Drivers License Number and valid credit card in order to be “Approved.” (a pre-authorization on your credit card of 10% of your requested bidding. Your credit card will not be billed and just preauthorized for 10% of your request or a minimum of $1000). NO EXCEPTIONS. OVERSEAS BUYERS must submit a refundable deposit of $5000 to be approved to bid, or have arrangements made with our office to be “Approved” to bid. 

3. PAYMENT: Invoices must be paid in full after Sale unless otherwise specified. A BUYER`S PREMIUM OF 13% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE. Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS PROPER EXEMPTION. Business and Personal checks may not be accepted without a letter of verification from your bank. CREDIT CARD payment (VISA or MASTERCARD ONLY) is accepted with an extra 3% premium. NO MERCHANDISE WILL BE RELEASED UNTIL INVOICE IS FULLY PAID. 

4. MANNER OF PAYMENT: Invoices will be emailed within 24 hours of the auction end date. If you are the successful bidder, your credit card will be charged as follows: for amounts less than $5000 the entire balance is due immediately unless otherwise specified by you, the successful bidder; for amounts greater than $5000-a 25% deposit is due immediately and the remaining balance is due within 48 hours either by Cash, Certified Check, bank draft, Visa, or MasterCard. The full purchase price on all lots sold to the same buyer must be paid within the time specified and prior to the removal of any goods. All certified checks and bank drafts for deposit and balances due shall be payable to the order of Stronghold Equipment Co. For wire transfers, please contact the Stronghold Equipment Co. for the pertinent information. 

5. REMOVAL: All purchases MUST be removed as herein listed: Small Items (Perishable Tools, Machine Parts & Accessories, Etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION. WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE. Standard Items (Machinery & Equipment) must be removed during announced removal period. 

6. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed. For items with rigging fees, all pickups must be made by appointment. Please contact the in house rigging coordinator at 905-971-8265. 

7. CONDITION OF ARTICLES SOLD: Neither the auctioneer nor the seller shall be responsible for the correct description, genuineness, authenticity of, or defect in any lot. Information was / has been provided from sources deemed reliable and Stronghold Equipment Co. makes no warranty or guarantee as to the accuracy of the information herein contained. No sale shall be set aside nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. DESCRIPTIONS AND PHOTO’S ARE NOT GUARANTEED. PLEASE MAKE YOURSELF AVAILABLE FOR THE OPEN INSPECTION PERIOD. It is the buyer’s responsibility to inspect before bidding. TO AVOID CONFUSION, PARTICIPANTS ARE BIDDING ON ITEMS LISTED IN THE LOT DESCRIPTIONS AND NOT ALL ITEMS SHOWN IN THE PHOTOGRAPHS. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM. 

8. SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA, CCOHS or otherwise. It is purchaser`s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. 

9. INDEMNIFICATION: Purchaser shall defend and indemnify and hold auctioneer and seller harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state or provincial, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising there from. 

10. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT. 

11. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto. 

12. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser. 

13. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. 

14. CONTRACT MOVERS: Stronghold Equipment Co. will be the exclusive rigger for this sale. Charges will be incurred based on individual lots purchased. Please contact the rigging coordinator at 905-971-8265. 

15. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. 

16. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision shall be final and absolute. 

17. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. 

18. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. 

20. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon whichthere is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller. 

21. By registering, you are agreeing to receive our fully cancellable newsletter.

22. As per our free shipping and loading to the lower 48 states in the US. FREE SHIPPING only applies to lots that specifially state "FREE SHIPPING" in the lot listing.  You can always contact Stronghold Equipment directly to confirm whether the free shipping applies to a speicifc lot.  The receiver must be able to unload the goods off of a truck at the destination location. If the destination is a rural delivery area based on regular trucking lines, there may be a delivery charge to get the machine to the location, OR we reserve the right to ship to a nearby terminal where the goods would have to be picked up at the buyer`s expense. There is no free shipping on oversize machines (eg. Mazak HTC400, Fadal 6030 VMC etc...)

23.  In the rare event of shipped goods being damaged during shipping, the proper process for insurance on the shipment will be taken.  These processes can take upwards of 120 days.  All shipped equipment will be insured,  but no claims will be paid out until the insurance claim is accepted and fully completed.  

See Full Terms And Conditions