Lot

58

Lot of 2 (2 units) Brand New Enerpac RC-506 style 50 Ton 6" Stroke / travel Hydraulic Jacks

In Assets Of Atlantic Corp Fabricators

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-971-8265 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Lot of 2 (2 units) Brand New Enerpac RC-506 style 50 Ton 6" Stroke / travel Hydraulic Jacks
Auctioneer has chosen not to publish the price of this lot
Hamilton, Ontario
0.00%
0%
Lot of 2 (2 units) Brand New Enerpac RC-506 style 50 Ton 6" Stroke / travel Hydraulic Jacks
Lot of 2 (2 units) Brand New Enerpac RC-506 style 50 Ton 6" Stroke / travel Hydraulic Jacks

Assets Of Atlantic Corp Fabricators

Ends from
Venue Address
349 Arvin Avenue
Hamilton
Ontario
L8E2M4
Canada

For Stronghold Equipment delivery information please telephone 905-971-8265.

Important Information

5 X CNC Machines (VMC, lathe, saws)

2004 Hardinge Quest 6/42 CNC Lathe MODEL QC with 12 station Turret Horizontal with Fanuc 21iT CNC controller - 21" swing - 2" spindle bore

1998 Takumi V8A CNC Vertical Machining Centre, High Speed Spindle, 24 ATC, CAT40, 32” x 20” x 22” travel, 32 x 30” table, Chip conveyor

Hyd-Mech M16-A automatic Scissor or Pivot Mitering Horizontal Band Saw with CNC auto angle programming. 16”H x 25”W cutting capacity

Behringer Fully Automatic Horizontal Band Saw Model HBP 430A - 48 x 32" cutting capacity - dual column unit - fully programmable CNC saw

Behringer Automatic Horizontal Band Saw Model HBP 420A - 18 x 18" cutting capacity - dual column unit

Lots of MINT 6" and 8" Machine Vise fully swivels and tilting units

 

WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire

 


Machine Shop & Fabrication Equipment

Behringer Fully Automatic Horizontal Band Saw Model HBP 430A - 48 x 32" cutting capacity - dual column unit - fully programmable CNC saw

Behringer Automatic Horizontal Band Saw Model HBP 420A - 18 x 18" cutting capacity - dual column unit

Hyd-Mech M16-A automatic Scissor or Pivot Mitering Horizontal Band Saw with CNC auto angle programming. 16”H x 25”W cutting capacity

Hyd-Mech S-20A Fully Automatic Horizontal Band Saw 3-HP 13x18" Cut - MINT UNIT!

Kingsland model MULTI 95 - 95 Ton Capacity Hydraulic Ironworker - complete with dies and punches - MINT UNIT 220V 3 phase

Amada Model H-400 Horizontal Semi-Automatic Band Saw - 16 x 16" cutting capacity with auto-clamping and cutting

Omni Horizontal Band Saw - 7x10 inch capacity with GEAR DRIVEN MOTOR - MINT & Unused - 220V

South Bend Engine Lathe 14.5" Swing 48" between centres

2 X Standard Modern Engine Lathe Series 2000 - 11" Swing - 20" between centers - complete with 3-Jaw chuck, tool post, tailstock

Remi Eisele model VMS-2SPV Automatic with power up/down Cold Cut Saw

First Vertical Milling Machine - 10 x 50 inch Table with power feed, 40 taper, Heidenhain digital read out (DRO), air draw bar - COMPLETE MILL

Hurco Vertical Milling machine - with Full power feed table - 12 x 48 inch table - R8 tool holder unit

Brown Boggs Plate Slip Roll - 42" capacity on table

2 X Wilton Belt & Disc Sander with 10" disc & 6x13" belt - MINT / UNUSED UNITS

Econoline Sandblasting Cabinet model RA-48-2 - 100CFM unit - workspce 23" deep, 22" high, 51" width

Cutter Master TOOL CUTTER and Grinder - model HDT-30 with 5C collet holder - 110/220V 1 phase

 


WE HANDLE ALL YOUR CRATING & SHIPPING NEEDS! Please inquire 

 

Air Compressor Packages - up to 200 HP!!

2006 Atlas Copco 100HP Rotary Screw Air Compressor model GA75+ FF - with built in air dryer, Puro Mini Filter and pressurized holding tank -
over 450 CFM

2010 Ingersoll Rand 200HP Rotary Screw Air Compressor model IRN200N-CC COMPLETE with 2400 CFM Air Dryer, surge protector unit and filtration
unit AND 2000 Gallon Tank - MINT PACKAGE

Ingersoll Rand 7.5HP Air Compressor with 80 Gallon horizontal tank 

 

Welding Equipment - 15 X Welders and Welding Systems and accessories

2 x Miller Dynasty 350 Tig Welder - complete package with whip and built in cooler - 300 amp AC/DC Tig and Stick - MINT CONDITION

3 X MINT Verner WELDING POSITIONERS up to 8000lbs capacity - tilt and rotate with variable speed drive and teach pendant controller - UNUSED AND
MINT 220V

Miller Millermatic 300 Mig Welder 300 amp with MIG GUN & Built in wire feeder

2 X Miller Deltaweld 452 Mig Welder with 60 series 4 wheel Wire Feeder and mig gun - 3 phase 450 amp 230/460/575V

Miller Deltaweld 652 Mig Welder with 60 series 4 wheel Wire Feeder and mig gun - 3 phase 650 amp 230/460/575V

Miller Syncrowave 250 DX Tig Welder 250 amps with Coolmate 4 water cooler, NEW TIG gun, foot pedal COMPLETE 230/460/575V 1 phase

Miller Autoinvision II robotic welding power source

Lincoln Idealarc SP-255 mig welder with built in wire feeder - 250 amp with mig gun

Lincoln CV-305 300 amp Mig Welder with LF-72 welding wire feeder with mig gun and cables

Lincoln Electric Precision Tig 275 - 275 amp tig welder with Micro-Start technology - with Lincoln Magnum welding water cooler and tig gun and
foot pedal

Lincoln Idealarc AC-1200 ARC Welder with 1200 amp power

Thermal Arc model 130S INVERTER - tig welder 130 amp with gun, cables and extinguisher on cart

Esab PCM-750i Plasma Cutter unit - 50 amp 3 phase with plasma gun on cart complete with cables

Nederman Portable Welding Fume Extractor "smog hog"

2 X Lincoln Fume Extractor model Mobiflex 400-MS - with extended reach snorkel arm - welding smog hog

4 X Torit Fume Extractor with long reach snorkel arm - 120V single phase - MINT & UNUSED - CLEAN FILTER

2 X Verner model VX-10000 Power tank rolls - Powered turning roll and idler 10000lbs capacity- UNUSED AND MINT 220V

3 X Acorn Welding Tables

TONS of welding accessories including brand new BESSEY CLAMPS

  

Material Handling

2 X robotic handling units - Fanuc S-430iW Handling Robot with RJ3 controller, teach pendant, and cables - FULLY FUNCTIONING RJ3 controlled
Fanuc robot

7 X Toyota, Hyster and Yale forklifts as new as 2009 - 5000lbs to 8000lbs capacity - 3-stage mast, sideshift and more (empty tanks included)

10 X Hydraulic Lift Table / Platforms up to 4000lbs capacity - Southworth, Blue Giant, Pentalift

BRAND NEW Enerpac hydraulic jacks up to 100 ton!

2 X Mint Richard Wilcox Chain hoists up to 5 TON! with 30' chain.

 

 Miscellaneous

13 X Industrial Tool Cabinets and Desks up to 35 drawer units - MINT

2 X Mint Hilman roller skates

4 X MINT Digital Crane Scale up to 40,000lbs 20 ton Capacity - complete with remote control and charging unit - brand new scale

2 X 2013 Tennant 2510 Walk Behind Electric Floor Polishing or Burnishing or Cleaning machine - MINT condition complete with built in charger for
36V battery

Brand new FOWLER Digital calipers up to 40" plus lots more metrology and inspection

6 X Tipster dump hoppers and 4 X liquid waste containers plus STEEL PLATE 3/4"

Tons of Hydraulic equipment - jacks, powerpacks, hand pumps, foot pedals and more!

 

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat

Terms and Conditions

Stronghold Equipment TERMS & CONDITIONS – FOR ALL AUCTIONS 

1. IDENTIFICATION: All participants are required to register prior to becoming an “Approved Bidder.” All Participants are required to give full name; permanent street address (P.O. Boxes will NOT be accepted or approved); phone number(s); email address, valid credit card and business name and banking information. Subsequent to registration on Bidspotter, approval to bid is at our discretion. 

2. DEPOSITS: All Online Registrants will be required to submit the requested Information, including: Drivers License Number and valid credit card in order to be “Approved.” (a pre-authorization on your credit card of 10% of your requested bidding. Your credit card will not be billed and just preauthorized for 10% of your request or a minimum of $1000). NO EXCEPTIONS. OVERSEAS BUYERS must submit a refundable deposit of $5000 to be approved to bid, or have arrangements made with our office to be “Approved” to bid. 

3. PAYMENT: Invoices must be paid in full after Sale unless otherwise specified. A BUYER`S PREMIUM OF 13% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE. Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS PROPER EXEMPTION. Business and Personal checks may not be accepted without a letter of verification from your bank. CREDIT CARD payment (VISA or MASTERCARD ONLY) is accepted with an extra 3% premium. NO MERCHANDISE WILL BE RELEASED UNTIL INVOICE IS FULLY PAID. 

4. MANNER OF PAYMENT: Invoices will be emailed within 24 hours of the auction end date. If you are the successful bidder, your credit card will be charged as follows: for amounts less than $5000 the entire balance is due immediately unless otherwise specified by you, the successful bidder; for amounts greater than $5000-a 25% deposit is due immediately and the remaining balance is due within 48 hours either by Cash, Certified Check, bank draft, Visa, or MasterCard. The full purchase price on all lots sold to the same buyer must be paid within the time specified and prior to the removal of any goods. All certified checks and bank drafts for deposit and balances due shall be payable to the order of Stronghold Equipment Co. For wire transfers, please contact the Stronghold Equipment Co. for the pertinent information. 

5. REMOVAL: All purchases MUST be removed as herein listed: Small Items (Perishable Tools, Machine Parts & Accessories, Etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION. WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE. Standard Items (Machinery & Equipment) must be removed during announced removal period. 

6. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed. For items with rigging fees, all pickups must be made by appointment. Please contact the in house rigging coordinator at 905-971-8265. 

7. CONDITION OF ARTICLES SOLD: Neither the auctioneer nor the seller shall be responsible for the correct description, genuineness, authenticity of, or defect in any lot. Information was / has been provided from sources deemed reliable and Stronghold Equipment Co. makes no warranty or guarantee as to the accuracy of the information herein contained. No sale shall be set aside nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. DESCRIPTIONS AND PHOTO’S ARE NOT GUARANTEED. PLEASE MAKE YOURSELF AVAILABLE FOR THE OPEN INSPECTION PERIOD. It is the buyer’s responsibility to inspect before bidding. TO AVOID CONFUSION, PARTICIPANTS ARE BIDDING ON ITEMS LISTED IN THE LOT DESCRIPTIONS AND NOT ALL ITEMS SHOWN IN THE PHOTOGRAPHS. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM. 

8. SAFETY DEVICES: Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA, CCOHS or otherwise. It is purchaser`s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. 

9. INDEMNIFICATION: Purchaser shall defend and indemnify and hold auctioneer and seller harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state or provincial, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising there from. 

10. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT. 

11. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled thereto. 

12. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser. 

13. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held. 

14. CONTRACT MOVERS: Stronghold Equipment Co. will be the exclusive rigger for this sale. Charges will be incurred based on individual lots purchased. Please contact the rigging coordinator at 905-971-8265. 

15. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk. 

16. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision shall be final and absolute. 

17. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute. 

18. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction. 

20. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon whichthere is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller. 

21. By registering, you are agreeing to receive our fully cancellable newsletter.

22. As per our free shipping and loading to the lower 48 states in the US. FREE SHIPPING only applies to lots that specifially state "FREE SHIPPING" in the lot listing.  You can always contact Stronghold Equipment directly to confirm whether the free shipping applies to a speicifc lot.  The receiver must be able to unload the goods off of a truck at the destination location. If the destination is a rural delivery area based on regular trucking lines, there may be a delivery charge to get the machine to the location, OR we reserve the right to ship to a nearby terminal where the goods would have to be picked up at the buyer`s expense. There is no free shipping on oversize machines (eg. Mazak HTC400, Fadal 6030 VMC etc...)

23.  In the rare event of shipped goods being damaged during shipping, the proper process for insurance on the shipment will be taken.  These processes can take upwards of 120 days.  All shipped equipment will be insured,  but no claims will be paid out until the insurance claim is accepted and fully completed.  

See Full Terms And Conditions