MIG WELDER, LINCOLN MDL. CV-655, new 2008, 650 amp cap., Lincoln Mdl. LF-72 wire feeder

MIG WELDER, LINCOLN MDL. CV-655, new 2008, 650 amp cap., Lincoln Mdl. LF-72 wire feeder

MIG WELDER, LINCOLN MDL. CV-400, new 2003, 400 amp cap., Lincoln Mdl. LN-7 wire feeder

TIG WELDER, THERMALARC MDL. 400GTSW, w/torch & accessories, S/N 0427020A188806

PORTABLE PLASMA CUTTER, THERMAL DYNAMICS MDL. PAK5XR, 460 v., 20 amp, S/N 053119A

SPOT WELDER, APOLLO, 220 v., 50/60 duty cycle, 20 KVA, 15" throat depth, water cooled, foot operated

HAND HELD SPOT WELDER, MILLER, 110 v., 50 duty cycle, 1.5 KVA, 12" throat depth, S/N KE576882

LOT OF WIRE FEEDER STANDS (APPROX. 5, LIKE NEW) ...[more]

INDUSTRIAL PALLET JACK, NORTHERN 4,400 LB. CAP. (2,000 kg)

BENCH GRINDER, 6

BENCH GRINDER, 6

PARTS WASHER, WEL-BILT, 20 gal. cap.

ENGINE HOIST, DURALAST 2 T. CAP.

LOT CONSISTING OF: (1) Baldor Reliance Electric Motor, 15 HP, 230/460 v., S/N EM2513T & (1) Gusher Pump, 230/460 v., 75 HP, S/N 1296-126

OIL FIRED HEATER, DAYTON, 55,000 BTU, S/N 29456

SHOP VACUUM, RIDGID, 16 gal. cap., 6.5 HP motor ...[more]

LOT OF STEEL MULTI-SHELF RACKS (10)

METAL SHOP TABLE

METAL SHOP TABLE

METAL SHOP TABLE

METAL SHOP TABLE

METAL SHOP TABLE

METAL SHOP TABLE

METAL SHOP TABLE

MACHINE OPERATOR'S CHAIR

MACHINE OPERATOR'S CHAIR

MACHINE OPERATOR'S CHAIR

MACHINE OPERATOR'S CHAIR

MACHINE OPERATOR'S CHAIR

MACHINE OPERATOR'S CHAIR

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

PLASTIC UTILITY SHOP CART

LOT OF UTILITY CARTS (3) ...[more]

ROTARY SCREW TYPE AIR COMPRESSOR, FS CURTIS MDL. RSB-50, new 2012, 50 HP motor, 204 CFM, 125 PSI, 460 v., 1,609.7 H.O.M., integral horiz. air rece...

SINGLE STAGE RECIPROCATING AIR COMPRESSOR, SULLIVAN PALATEK MDL. SPHT451512, 15 HP motor, 230 v., 800 PSI, horiz. air receiver, S/N 45Y-2-G11 (Lo...

REFRIGERATED AIR DRYER, SULLIVAN PALATEK MDL. SPRF-58A-116

TRANSFORMER, EATON, 75 KVA, 480 volt Delta, Cat #V48M28T75EE, Type DT-3, Ref #V75E001

PEDESTAL JIB CRANE, GORBEL ½ T. CAP., 12' reach x 10' ht., Budgit ½ T. cap. chain hoist, pendant c ...[more]

CNC VERTICAL MACHINING CENTER, DAH-LIH MDL. MCV1250, new 9/2013, wired for 4th axis, Fanuc Oi-MD CNC ...[more]

CNC 4TH AXIS ROTARY INDEXER, PARKSON 12", new 2013, Mdl. MNC-320R(L), 320 mm/12.6" dia. 6-jaw manual chuck, 16.7 RPM max. rotation speed, .001 deg...

CNC SLANT BED LATHE, HURCO MDL. TM18L 2-AXIS, new 2012, Hurco Max CNC control, rated at 25" max. turning dia., measures 35" actual sw. over bed, 3...

CNC SLANT BED LATHE, HURCO MDL. TM18L 2-AXIS, new 2012, Hurco Max CNC control, rated at 25" max. turning dia., measures 35" actual sw. over bed, 3...

HYDRAULIC STEADYREST, SAMCHULLY 10", Mdl. SW13014A, Cat. #35-245, 8-60/78/92, S/N N.A. (This unit fits the Hurco CNC lathes and will be offered fo...

PEDESTAL JIB CRANE, ABELL-HOWE ½ T. CAP., 12' reach x 10' ht., Budgit ½ T. cap. chain hoist, penda ...[more]

FORKLIFT, YALE 10,000 LB. CAP., new 2004, Mdl. GLC100MJNGAE092, LPG, 92" triple stage mast, 189" lift height, cushion tires, side shift, 42" forks...

FORKLIFT, TOYOTA 6,000 LB. CAP., new 2000, Mdl. 7FGCU30, LPG, 81" triple state mast, 171" lift height, cushion tires, side shift, 42" forks, S/N 6...

VERTICAL TURRET MILL, CLARK MDL. 2V5, 9" x 49" pwr. feed table, R8 spdl. taper, variable spdl. spds: 60-4200 RPM, 3 HP motor, Sino 2-axis Mdl. SDS...

HORIZONTAL BANDSAW, TRAJAN 10" X 18", new 1/2007, Mdl. 1018S, variable spds: 65-534 FPM, 2 HP motor, S/N 790028

CNC VERTICAL MACHINING CENTER, EUMA-SPINNER MDL. MVC-1100A, new 2005, wired for 4th axis, Fanuc Series 21i-MB CNC control, 23.62" x 47.24" table, ...

CNC 4TH AXIS ROTARY INDEXER, HAAS 12", 12" dia. 6-jaw chuck, tailstock, S/N N.A.

CNC VERTICAL MACHINING CENTER, HAAS MDL. VF-2, new 2005, wired for 4th axis, Haas VOP-D CNC control, 14" x 36" table, 30" X-axis long. travel, 16"...

CNC 4TH AXIS ROTARY INDEXER, HAAS 8", 8" dia. 6-jaw chuck, tailstock, S/N N.A.