Approved Contractors:Riggers:Montreal Rigging- 1285 Rue Vignau, Saint-Bruno-De-Montarville, Quebec J3V 4K7- Contact: Rob Marleau or Alex landry- 5...

Bulk Bid #1 (2018) Lindner Shredding and Washing Line **Auctioneers Note** If this Bulk Bid #1 Exceeds the sum total of individual lots 10 through...

{ Choice of lots: 2 } Cleated Up-Loading Conveyor section approximate dimensions 58" wide x 224" long x 12.5ft high. (Ref: C100)

Vecoplan Shredder Model RG 52/150 SPK FF, Serial number 7957010, Year of MFG 2005, equipped with Out Feed Conveyor C-101.  Infeed Conveyor sold se...

Inclined Take-Off Conveyor C-102. 332/575V 3Ph 2HP Drive. Approximate Dimensions 54" wide x 30ft.

Balistic Sorter (B-101) Includes transfer conveyor C-103. Approximate Dimensions 20' x 9'

Inclined Feed Conveyor (C-104) 332.575V\ 3HP. Approximate dimensions 18" x 300"

Pellenc Optical Sorter Model Mistral 16-05T 2D, type BT 1600 BB, Serial number BAEA0008. Date of MFG 02/11. 230V-Single Phased 50-60HZ. Lot includ...

RDH inclined feed conveyor, 1600mm(61") wide, cleated belt, 2500mm(98") horizontal section, 8700mm(342") inclined section, 30 degree incline drive...

Lindner Micromat Plus 2000 single shaft shredder, 2025mm wide rotor with rotor protection welding, (68) knives, (4) bed knives, hydraulically oper...

ND207 cleated discharge conveyor, 800mm(31") wide x 3300mm(129") horizontal x 6500mm(255") inclined section. -Lindner prewash unit, model Rafter 6...

Lindner prewash unit, model Rafter 6900/SK, stainless steel screen and housing, 800mm screw diameter, 7000mm housing length, 18.5 kw motor drive, ...

Lindner Friction washer, model Twister 600, stainless steel construction, 560mm rotor diameter, 3000mm long housing, 30kw motor drive. **Auctionee...

For collecting and transporting the material from the friction washer to the wet granulator. Housing and screw made of stainless steel, 1.4301. Sc...

Lindner wet granulator, model 1100-800, 1100mm(43") x 800mm(31") feed opening, 5 knife rotor, belt driven by 110kw(147hp) motor, serial# 201807100...

Lindner Friction washer, model Twister 600, stainless steel construction, 560mm rotor diameter, 3000mm long housing, 37kw motor drive. **Auctionee...

For collecting and transporting the material from the friction washer to the wet granulator. Housing and screw made of stainless steel, 1.4301. Sc...

Lindner separation float sink tank, model Graviter 2100, stainless steel construction, approximately 2100mm(82") x 5000mm(196") long trough, with ...

LMD 1200-2000 pre dryer, stainless steel construction, 560mm diameter rotor, 30 kw motor drive.**Auctioneers Note** This lot is part of Bulk Bid L...

{ Choice of lots: 21, 21A } Lindner Loop Dryer, model LMD 1200/2000, 1200mm(47") diameter x 2000mm(78") rotor, each driven by 90kw motor, project...

{ Choice of lots: 21, 21A } Lindner Loop Dryer, model LMD 1200/2000, 1200mm(47") diameter x 2000mm(78") rotor, each driven by 90kw motor, project...

22kw Reitz discharge blower with cyclone Collector**Auctioneers Note** This lot is part of Bulk Bid Lot #1. If the bid price on Bulk Bid #1 Exceed...

Thermal drying unit, model TD 250, electrically heated with 250kw heater, with integrated Reitz radialventilator blower, driven by 37kw motor. **A...

Type MSE 035-006036-00, serial No: 605064, Year of MFG 2018, 15HP/11kW, 3540 RPM. 575V/3ph. Lot includes Cyclone Collector **Auctioneers Note** Th...

Stainless Steel Screw Conveyor, Auger Conveyor, approximate dimensions 24" x 20" x 16'.

15 cu meter Buffer silo hopper with integrated dust filtration and cyclone feed collector, agitated hopper driven by 2.2kw motor, discharge augers...

Integrated control system with Siemens ET200 plc and hmi, including soft starters and frequency inverters. CE rated controls. system built 2018. *...

(REF:4391-5)  IWAT process water treatment and sludge dewatering system, model 2x CCF 15.000 & sludge dewatering consisting of the following:-IWAT...

(REF:4391-3) Erema Intarema 1512_TVEplus Pelletizing Line, nominal capacity range 850-1250kg/hr depending on feed material, currently with 8505 ru...

(REF:4391-2) Erema Intarema 2021 T-VEplus Pelletizing Line, nominal capacity range 2200-3500kg/hr depending on feed material, currently with 8410 ...