SALE CONTINUES ON PACKAGING FLOOR

All Removal Is Provided By:  Aversa Brothers - Please Contact Frank Aversa at 646-879-7218 or aversabros@aol.com

Jogi Juice Large Equipment Rigging Fees 

Immediately Available for Turn-Key Sale -OR- Equipment Assets Going to Auction on July 8th.

Designed for Single Serve High Margin Products. 

MDG is Proud to Offer the Equipment & Real Estate of the Former Jogi Juices Facility Located in Paterson, NJ for Immediate Sale & or Auction. This Facility Processed and Packaged High End Fruit Juice Products in Single Serve PET & HDPE Bottles.

21,700 SF Built Out Food Grade Facility on 1.05 Acres of Land with Room to Expand

Tremendous Market Access:

Very Near to Route 80, 287, New Jersey Turnpike, etc.

13 Miles From George Washington Bridge, 17 Miles from Newark Airport

Facility Recently Refitted with wiring, lighting, interior walls pointed and painted, replaced steel beams and supports, steel deck roof, boiler, piping, concrete food grade cement floors w/drains, UV filtered water system, walk in cooler, refrigeration units, new radiant heaters, FRP panels, Security system, video monitoring , paved lot, storm drains, office wood floors.

Additional Information:

Within NJ Urban Enterprise Zone,

Many Improvements Implemented in 2011,

Prestine Food Grade Floors & Drains Installed in 2011

Complete Testing and R&D Lab,

3 Dock Doors.

EQUIPMENT ASSETS LISTED BELOW!!

2012 R & D PILOT PLANT

OMVE HTST/UHT Inline Sterilization System, Model HT220, S/N 120020-1 with Weintek Touchpad Display, 230 V, Single Phase

2012 OMVE S/S Portable Clean-Fill Hygienic Filler, Model FS10-C, S/N 120020-2 with Enclosed Bench, 230 V, Single Phase

2011 Temptek Single Fan Chiller, Model CF-3A-21HF-R410A, S/N 119669, 230 V, 3 Phase

JUICE BOTTLING LINE

JUICE BOTTLING LINE (Ran 180 to 200 BPM – 10 oz. HDPE and PET Bottle) SUBJECT TO BE SOLD AS BULK BID!!

Line Ran Less Than 3 Years.

Currently Set Up for 10oz Bottles. Additional Change parts Available. Previously Ran 12, 14 & 16 oz Decanter. 10, 13.5 & 16 oz Round. 10, 12, 16 oz Square with Portola 38mm DBJ.

Major Upgrades and Improvements Implemented in 2012 (more than $260,000 in Upgrades Installed on Federal Filler)

UNSCRAMBLER

Pace Omni Line M600 SSD Bottle Unscrambler, S/N 1417 with Aprox. 12 ft. L x 61” W x 35” Deep S/S Bottle Hopper, Model 120cu with Elevator and 18” W Belt with Flights, Controls and (3) Reliance SP500 VFD’s

RINSER

Capmatic 28-Head S/S Bottle Rinser, Model RA128, S/N 1707 with Allen Bradley Logix 5561 PLC Controls, (10) PowerFlex 40 VFD’s and Redlion Touchpad Display, 575 V (Officine AVE)

MONO-BLOCK FILLER/CAPPER

Federal 36-Valve S/S Rotary Filler, Machine #2065ESW4/36/15GR1253 with 15-Head Screw Capper, Cap Feeder with Sanitizer Cap Chute and Elevated Cap Hopper, Complete Enclosure with Hepa Air Filtration System, Allen Bradley SLC-500 DH485 Link Coupler, Allen Bradley SLC 5/05 CPU, (2) PowerFlex 40 VFD’s, Allen Bradley PanelView Plus 1000 Touchpad Display and Anderson AJ300 Chart Recorder, S/N 1020023, Set-up with 10 oz. Change Parts, Ran 38 ml JBD Caps, Additional 14 oz. Change Parts, Ran 180 BPM to 200 BPM

K.S.M. Elevated S/S Cap Hopper, Model/SN 4826.1.1.1, Belt Length 425.5, Aprox. 30” W x 17” L x 24” Deep with 6” W Belt with Flights

(6) Tri-Clover 741 Series S/S Air Valves with Shell and Tube Heat Exchanger, S/S Air Blow Down and Fristam 7-1/2 hp Centrifugal Pump Mounted on Skid

Aprox. 22” W x 39” H S/S Surge Tank with (3) Fristam Centrifugal Pumps – (2) 5 hp and (1) 3 hp

2010 Upgrades:

Control panel for chemical system, Luminite Sanitary Level Transmitter, New Ball Bearings – LifterRoller, New Canister Seal Ring, Valve Spacers, Flat rubber, Valve Seal Rings, Vent Tube Seal Ring and O-Rings, VFD – Motor Drive 2HP, Powerflex40 -600VAC, Regulator Box, Chart Recorder Box, Throttling Valve, Divert Valve, Shut Off Valve, Chemical Supply System, Tube Clamps, Bowl Raising Screw, Bearing Spacer, Truarc Ring, Pressure Relief Plug, Retaining Ring, Cap Applier Brace, Support Post for Cap Applier, Level Probe, Crossover pipe, Fluid Level 8 Pin Cruozet Controller, CIP Piping including Circulation Loop, Throttling and Shut Off Valve, Flex Hoses at Filler Inlet, Spray ball Connections w/Swivel Joint Clamps, (2) Conductivity Sensors, Sanitary Air Relief Valve for CIP Pump, Automatic Divert and Shutoff Valves w/Manual Isolation Ball Valves for the Addition of Water Flush & a MAG Flow Meter, Proximity Interlock Sensor at the Flowverter

SLEEVER

PDC Shrink Sleeve Labeler, Model R200, S/N 159 with VideoJet Data Flex Date Coder, Allen Bradley Compact Logix L23E PLC Controls, (5) PowerFlex 40 VFD’s, (2) Allen Bradley Kinet 300 Units and Allen Bradley PanelView Plus 600 Touchpad Display

STEAM/SHRINK TUNNEL

PDC Aprox. 80” L S/S Steam/Shrink Tunnel, Model KST80712, S/N 307, Mounted on Aprox. 122” L x 4-1/2” W Belt S/S Conveyor with Aprox. 7” W x 11” H Product Opening

CASE ERECTOR

SWF Type Case Erector with Nordson Gluer, Model 2302 SD (Plate Unavailable)

CASE PACKER

Hartness International Drop Case Packer, Model 1900, S/N 19051 with Change Grids, Allen Bradley MicroLogix 1500 PLC Controls and Allen Bradley 1606-XL Power Supply

CASE SEALER

Elliott Case Sealer, Model CP-P03-G13 with Nordson Gluer, Model 230 and Allen Bradley MicroLogix 1100 PLC Controls

LABELER/CODER

VideoJet Portable Box Labeler, Model P3400 with Zebra RFID Ready Printer, Model 110PAX4

PALLETIZER

Goldco Low Level Case Palletizer, Model L2025 Main Line, S/N N0391267 with Pallet Dispenser for 36” x 36” and 40” x 48” Pallets, Infeed and Outfeed Conveyor, Siemens Simatic S7-300 PL Controls, (6) Siemens VFD’s, Siemens Simatic TP27 Touchpad Display,  (Capable of Palletizing at speeds up to 25 Cases Per Minute.)  (Small Footprint)

PRODUCT & CASE CONVEYOR

Hundreds of Feet Line Related Nedco Infeed and Outfeed S/S Product Conveyor with 3-1/4” W Plastic Table Top Chain, Adjustable Rails, Leg Supports, Drives, Micro-Switches and (2) Air Knives

Related Power Feed Case Conveyor with 7-1/2” W Belt, Micro-Switches and Drives

MODULAR COOLER

Modular Cooler with (4) 6-Fan Blowers by Keep-Rite and Trenton Refrigeration; (2) Hercules Insulated Doors, (1) Man Door, Bolted Panels including (19) Sections 3-High Pallet Racking (Aprox. 114 Pallet Spaces) (Possible Overall Dimensions Aprox. 33 ft. L x 23 ft. W x 12 ft. H)

BLEND ROOM

(3) Crepaco 1,500 Gal. Dome-Top, Slopped Bottom S/S Jacketed Processors, S/N D-5467, S/N D-5468 and S/N D-5469 with Vertical Sweep Scrape Surface Agitator, Sprayballs, Tri-Clover 361 Series Air Valves, Level Sensors, (Jacket 109 psig @ 400 Degree F) including (2) 2012 Alfa Laval S/S Air Valves, Type UNIQUE 7000, PN 10, S/N 21220509483 and S/N 21110710013, (2) Anderson Flow Meters, Fristam 5 hp Centrifugal Pumps, Allen Bradley Logix 5561 PLC Controls, Allen Bradley 1606 XLE Power Supply and PanelView Plus 1250 Touchpad Display (S/N D-5469 located in the Pasteurization Room)

4-Valve 2011 Alfa Laval Mix-Proof S/S Air Valve Cluster with Blue Think Tops

FMC Aprox. 63” H x 46” W Frozen S/S Jacketed Chipper Tank with High Yield Agitator and S/S Legs

Pennsylvania Aprox. 5,000 lb. x 1 lb. Capacity Digital Scale, Model 7500 with 4 ft. x 4 ft. Platform

PASTEURIZER ROOM

2010 Skid-Mounted Feldmeier Triple Tube Flash Pasteurizer, S/N S-0435-10  with Anderson Flow Meter, Model IZMAG032D000S0000, S/N 1103360, 2011 Waukesha 00U2 Positive Displacement Pump, S/N 1000002602936, Waukesha 1-1/2 hp and 2 hp Centrifugal Pumps, Bell and Gosset S/S Heat Exchanger with Shell and Tube Side MAWP 150 psi @ 375 Degree F, Emgo Air Actuated Valve Operating at Min. Pressure 5 Bar and Max Pressure 10 Bar, Allen Bradley MicroLogix 1400 PLC Controls, (2) ABB VFD’s, Maple Systems Weintek Display and Anderson AJ300 Chart Recorder, S/N 1104019

Feldmeier Aprox. 50” H x 30” W S/S Surge Tank, S/N S0435110

Purchased New in 2010. Only Operated for 3 Years. Previously Operated 1800 GPH (30 GPM) with 30% Solids.

DOSING MACHINE

Lanxess Velcorin DT S/S Beverage Stabilization Dosing Machine, Model 256622, S/N 90097111 with Enclosed S/S Cabinet, Endress Hauser Flow Meter, Model ProMag H, S/N EB0F1919000 and Sightglass

ADDITIONAL ITEMS LOCATED IN PASTEURIZATION ROOM

S/S Control Panel with Allen Bradley Controls and PanelView Plus 600 Touchpad Display

(2) Noritz Tankless S/S Water Heaters

CIP ROOM

Skid-Mounted 3-Tank CIP System with (3) Perma-San 241 Gal. CVS S/S Tanks, S/N 76064-2, S/N 76064-3 and S/N N/A with Shell and Tube Heat Exchanger, Tri-Clover Air Valves, Tri-Clover Butterfly Valves, Fristam Aprox. 5 hp Centrifugal Pump, Related S/S Piping, Controls and Anderson ARC 700 Chart Recorder

EcoLab Chemical Feed Make-Up System with Chemical Pumps and Filters

DECHLORINATION SYSTEM (250 GPM)

2013 Trojan UV Logic UV System, Model TrojanUVLogic, S/N TI01301111087, System Type 04ASS20, Aprox. 58” L, SSC Rating 10KA @ 600 VAC, Lamp Power 144W, Enclosure Type 3R/IP24, MO Pressure 150 psi/10 Bar with Digital Read-Out

(2) Aprox. 63” H x 48” W Carbon Filter Tanks

Shelco Micro-Guardian S/S Filter, Model 21F0S4, S/N 143619 with 150 Pressure Reading (Filter Dimensions Aprox. 52” H x 16” W)

2011 Tekleen Aprox. 57” L Automatic S/S Filter, Model ABW4-LP10M1C

AIR COMPRESSOR

2008 Ingersoll Rand __ hp Premium Efficiency Oil-Free Compressor, Model IRN50N-OF, S/N TA00314U08327, Max. Discharge Pressure 150, Drive Motor 50, 460 V, 3 Phase

Ingersoll Rand Refrigerated Air Dryer, Model NVC300A400, S/N 312116, R404a Refrigerant, 460 V, 3 Phase

Aprox. 91” H x 36” W Vertical Air Receiver

PACKAGE CHILLER

Process Cooling System with Pro 6-Fan Freon Package Chiller and Tank

BOILER

2001 Cleaver Brooks High Pressure Boiler, Model CB1700125-150, S/N 0L101484, Natural Gas, 5,103,000 BTU/Hr. Input, 460 V, 3 Phase (Recertified 04/14) (Small Footprint)

Deaeration System with S/S Holding Tank and (2) Grundfoss Type Pumps

(3) Chemical Feed Pumps

MATERIAL HANDLING

Yale 2,800 lb. 36-Volt Sit-Down Forklift, Model ERC030AGN36TE082, S/N A814N02090Z, 189” 3-Stage Lift

Yale 4,000 lb. Electric Pallet Jack, Model MPB040-EN24T2748, S/N B827N17123C

Hobart 36-V Battery Charger

Hydraulic Pallet Jack

(3) Mini Mag Factory Cart Floor Scrubber/Sweepers with (1) 24-Volt Dual Mode Battery Charger

19-Sections 3-High Pallet Racking (Aprox. 114-Pallet Spaces)

LAB

(2) Quincy Lab Inc. Digital Micro-Processor Incubators, Model 12-140E

Hanna Instruments #184432 Fruit Juice Titratable Acidity Tester (Food Care Line

Reichert AR6 Series Automatic Refractometer

(2) Thermo Scientific Orion Star A211 pH Meters

Accujet Pro Brand Hand-Held Tester

3M Electronic Pipettor II – 1 ml Tester

Scienceware Light Box, Model Petite

Rice Lake Weighing System TMap Weight, Range 100g – 1g, Class F, Density 7.84g/cm3

Ohaus S/S Defender 5000 Xtreme.W Digital Scale with 12” x 12” Platform

And Max. 400g d=0.019 Capacity Digital Scale, Model EK-410i, S/N P1891945

Master-Bilt 2-Door Glass Display Cooler, Model BMG-48, S/N LV48763

Lab Cabinets and Overhead Cabinets including Single and 2-Bowl Sinks

Lab Glassware including: Kimble/Kimax 50 ml to 1000 ml Beakers, Flasks

SURPLUS EQUIPMENT

Breddo Aprox. 53” W x 43” Deep S/S Jacketed Likwifier with Pancake Motor (Possibly 250 Gal.)

2000 Nucom Engineering S/S Rotary Feeder, Model DT500DEM, S/N 10006596 (Material and Steel SS SS AR)

2006 Multi-Vac S/S Tray Sealer, Model T350, S/N 109616 with 8” W Intralux Belt Infeed and Outfeed Conveyor, Beckhof Controls and SEW Euro Drive, 220 V

Pillar Technology Portable Induction Foiler

S/S Diaphragm Pump

Aprox. 30 Gal. S/S Balance

(2) Bohn 4-Fan Blowers with Trenton Refrigeration and Larkin Evaporative Condensers

(3) Lenox Air Conditioning Units

Assorted Vacuum Pump and Motors

(2) Crepaco 1,000 Gal. S/S Dome-Top Processors, S/N 1500-9730 (PT-3) and S/N D-4000 (PT-4) with Vertical Sweep Scrape Surface Agitators, Baffle, Dual Sprayballs and 3” Outlet, Jacket 75 psig @ 315 Degree F (Uninstalled)

4-Compartment Jacketed S/S Flavor Tank with (2) 800 Gal. and (2) 400 Gal. Compartments, Vertical Agitators and Sprayballs

Mettler Toledo High Speed Checkweigher with Safeline Metal Detector with a Product Opening Aprox. 5-1/2” H x 8” W, Mounted on S/S Conveyor

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat

• Available Monday – Friday, 8:00am – 12:00am ET.
• Email: Support@bidspotter.com
• Office: 253-858-6777
• Frequently Asked Questions