INGERSOLL RAND CENTAC 500-HD AIR COMPRESSOR - VERY LOW HOURS (2005)

ATLAS COPCO TYPE FD2000W VSD SSA/UI COMPRESSED REFRIGERATED AIR DRYER, R404A REGRIGERANT, COMPLETE WITH ATLAS COPCO ELECTRON CONTROLS S/N: 101331 ...

FANUC PAINTING ROBOT SYSTEM COMPLETE WITH (2) FANUC P200 PAINTING ROBOTS WITH 1252 CONTROLS, TEACH PENDANT, EACH ROBOT COMES WITH 25' TRAVEL, 6-AX...

MRL INDUSTRIES MAC BLACK MAX II VERTICAL FURNACE S/N: 69360 (AS-IS) (LOCATED MISSISSAUGA, ONTARIO)

5 - PEDDINGHAUS SERIES 1000 STRUCTURAL FABRICATOR HYDRAULIC BEAM PUNCH, BEAM DEPTH 36'', FLANGE WIDTH 12'' MAXIMUM, FLANGE THICKNESS 1-1/8'' IN A-...

PEDDINGHAUS MDL 110/20 110-TON HYDRAULIC DETAIL PUNCH ADJUSTABLE STROKE .4''-2'', PUNCH STROKES AT .4'' 40 SPM, 1.2''@21 SPM, 2''@14 SPM, WORKING ...

BUFFALO NO. 1/2 UNIVERSAL IRONWORKER, MAXIMUM PUNCH DIAMETER: 1-1/16'' THROUGH 5/8'', MAXIMUM MATERIAL THICKNESS 3/4'' (13/10'' PUNCH ONLY), DEPTH...

POWERMATIC 20'' VERTICAL BANDSAW, WITH 24''X24'' TABLE, BLADE WELDER ATTACHMENT. (LOCATED IN SOUTHAMPTON, PA)

MUBEA MDL KBL SIZE 0 IRON WORKER, ROUNDS: 1-1/2'', SQUARES 1-5/16'' AGNLES: 2-1/2''X3/8''. FLAT BAR: 2'' S/N: 131/7992/13. (LOCATED IN SOUTHAMPTON...

PINES MDL #M12181 TUBE BENDER APPROXIMATELY 3/4'' SCHEDULE 80 PIPE CAPACITY, COMPLETE WITH ASSORTED DIES S/N: 11045-71136 (LOCATED IN SOUTHAMPTON,...

DOALL MDL# 3612-3 36'' VERTICAL BANDSAW WITH SPLIT TABLE, BLADE WELDING ATTACHMENT S/N: 153-63598 (LOCATED IN SOUTHAMPTON, PA)

CLAUSING COLCHESTER 15''X48'' GEARED HEAD ENGINE LATHE COMPLETE WITH 6-JAW CHUCK, SPINDLE SPEEDS TO 2000 RPM, S/N: 6/0015/07582 (LOCATED IN SOUTHA...

GARDNER DENVER MDL EBM01G 75-HP SKID PACKAGED ENCLOSED ROTARY SCREW TYPE AIR COMPRESSOR, 100-PS: MAXIMUM PRESSURE, 300 CFM MAXIMUM OUTPUT, COMPLET...

PANASONIC VR004 FULLY INTERGRATED PANASONIC ROBOTIC INCLOSED WELDING CELL, COMPLETE WITH (2) PANASONIC VR004 ROBOTS, (2) OPERATOR LOAD/UNLOAD STAT...

PANASONIC VR006 FULLY INTERGRATED 2-STATION ROBOTIC WELDING CELL, COMPLETE WITH (2)PANASONIC VR006 WELDING ROBOTS, TEACH PENDANT, (2) OPERATOR LOA...

HYSTER MODEL S60E 6,000 # CAPACITY FORKLIFT TRUCK, WITH 342" REACH MAST 1600# CAPACITY @342", 2000# @23', 5 DEGREE TILT, SOLID TIRES, LPG S/N: C00...

KALTENBACH MDL. KKS400 15'' MITRE COLDSAW, 2-SPEED, AUTO INFEED, S/N: 54954 (LOCATED IN POUGHKEEPSIE, NY) ...[more]

STRIPPIT SUPER 30/30 SINGLE END PUNCH, 3.5'' HOLDER, 1-1/4'' HOLDER, 2'' NOTCHING HOLDER, LARGE QUANTITY OF PUNCHES & DIES (LOCATED IN POUGHKEEPSI...

LOCKFORMER POWER FLANGER, 14GA, S/N: 2644 (LOCATED IN STAATSBURG, NY) ...[more]

KRAMER MDL. E-300 VIBRATORY FINISHER, 115 VOLT, TIMER, 9'' WIDE X 28'' LONG X 12'' APPROXIMATELY INSIDE DIMENSIONS (LOCATED IN STAATSBURG, NY) .....

FORKLIFT PROPANE TANK HOLDING CAGE, 36'' DEEP, (6)TANKS (LOCATED IN STAATSBURG, NY) ...[more]

AMADA PRESS BRAKE TOOLING, WITH STANLEY VIDMAR 5-DRAWER CABINET (LOCATED IN STAATSBURG, NY) ...[more]

POWERMATIC MDL. 2100-30 PEDESTAL MOUNTED DOUBLE END GRINDER, 1.5HP, 1500/1800 RPM (LOCATED IN STAATSBURG, NY) ...[more]

200-AMP MILLER CP-200 CONSTANT VOLTAGE DC ARC WELDER, MILLER 24V CONSTANT SPEED WIRE FEEDER, WATER COOLED, S/N: KF851760 ...[more]

TAUMEL MDL. 1251 ORBITAL RIVETER, 3/0/230, S/N: CAF71-7005 (LOCATED IN STAATSBURG, NY) ...[more]

FMW BENCH TYPE ORBITAL RIVETER (LOCATED IN STAATSURG, NY) ...[more]

MOORE PARALLEL, 10'' X 4'' WIDE, S/N: 1170 (LOCATED IN STAATSBURG, NY) ...[more]

PERKIN ELMER MOORE OPTICAL SCOPE (LOCATED IN STAATSBURG, NY) ...[more]

MOORE ANGLE PLATES (10'' X 6''), (2) #3 MOORE JIG GRINDER HAND WHEELS, ASSORTED MOORE TOOLING, WIIPES (LOCATED IN STAATSBURG, NY) ...[more]

PLUS GAUGE, INCLUDING 25MM, 22MM, 20MM, 18MM, 16MM, 14MM, 12MM, 11MM (LOCATED IN STAATSBURG, NY) ...[more]

PRECISE TYPE SUPER 40, 1/4HP, 45,000 RPM (LOCATED IN STAATSBURG, NY) ...[more]

YUASA RADIUS & ANGLE DRESSER (LOCATED IN STAASBURG, NY) ...[more]

WESTONER MDL. #RHB-32 0-32 & TESTRO 0-10 HANDHELD REFRACTOMETERS (LOCATED IN STAATSBURG, NY) ...[more]

WESTON MDL. #614 CANDLE METER (LOCATED IN STAATSBURG, NY) ...[more]

PNEUMO PRECISION MDL.#RT-14005TC 14'' MOTORIZED ROTARY TABLE (LOCATED IN STAATSBURG, NY) ...[more]

8.5'' SIP ROTOPTIC-1 ROTARY TABLE, S/N: 282 (LOCATED IN STAATSBURG, NY) ...[more]

HARDING MDL. #VH-2 VERTICAL MILLING HEAD ATTACHMENT (LOCATED IN STAATSBURG, NY) ...[more]

CINCINNATI INDEXER (LOCATED IN STAATSBURG, NY) ...[more]

ETTCO #5 TAPPING HEAD (LOCATED IN STAATSBURG, NY) ...[more]

8'' X 20'' NIKON X/Y TABLE, MICROMETERS, GLASS INLAY (LOCATED IN STAATSBURG, NY) ...[more]

DUMORE CAT MDL. #37-021 12'' HIGH SPEED SENSITIVE DRILL, FOOT SWITCH, VARI-SPEED UP TO 16,000 RPM, SINGLE PHASE, S/N: 8323-3516 (LOCATED IN STAATS...

DIACRO #1 HAND PUNCH, S/N: BA-3354 (LOCATED IN STAATSBURG, NY) ...[more]

11'' X 20'' THOMPSON X/Y SLIDING TABLE, ELECTRONICALLY OPERATED CLAMP (LOCATED IN STAATSBURG, NY) ...[more]

DAREX 1/2-HP DRILL SHARPENER, S/N:53759 [LOCATED AT 4920 ALBANY POST ROAD, STAATSBURG, NY] ...[more]

BLUE M OTP-120 ELECTRIC OVEN, 100-500 DEGREES RANGE, 12'' HIGH x 13'' WIDE x 12'' DEEP INSIDE DIMENSIONS [LOCATED AT STAATSBURG, NY] ...[more]

MOORE NO. 3 MICRO-SINE TABLE, WITH STRAPS & CABINETS [STAATSBURG, NY] ...[more]

LORS 1100AP-1 PRESS TYPE SPOT WELDER, 100-KVA @50 CYCLES, 220-PRIMARY VOLTS, INTERLOCK MODEL 105 SINGLE PHASE PROCESSOR CONTROLS, FOOT SWITCH, 24'...

SUNNEN PG-400-S & PG-500-S GAGE SETTING FIXTURES, SUNNEN MODEL PG-700-S PRECISION SMALL BORE GAGE, TRUING SLEEVES, MANDRELS, ETC. [LOCATED IN STAA...

HARDINGE 5C COLLETS, APPROX. 60 WITH 6-DRAWER WRIGHT LINE CABINET [LOCATED STAATSBURG, NY] ...[more]

HARDINGE PARTING TOOL [LOCATED IN STAATSBURG, NY] ...[more]

APPROX. 4000# OF MEDIA [LOCATED IN STAATSBURG, NY] ...[more]

[3] FOOT SWITCHES [LOCATED IN STAATSBURG, NY] ...[more]

JOSEF KIHLBERG 5561PN BOX STAPLER, PNEUMATIC ...[more]

SOUTHBEND 32-12 VERTICAL MILL, WITH 9''x 32.5'' HANDFEED TABLE, #30 TAPER SPINDLE, 6-SPEED, 90-2500 RPM SPINDLE FORWARD / REVERSE, 6'' BRIDGEPORT ...

CROWN 20MT 2000# CAPACITY ELECTRIC WALK BEHIND LIFT, 130'' REACH, S/N: 28478 [LOCATED IN STAATSBURG, NY] ...[more]

GRINDING SPINDLE [REBUILT FOR DOALL SURFACE GRINDER [STAATSBURG, NY] ...[more]

BOSCH RC0025.ES06 VACUUM PUMP, 15-CFM, S/N:E40006 [LOCATED AT STAATSBURG, NY] ...[more]

MOORE NO.1 JIG BORER, 1/2-HP, 10''x 16'' TABLE, [REMANUFACTURED IN 1987 BY MOORE], 10-HOURS OF USE SINCE BEING REMANUFACTURED. [LOCATED WAPPINGERS...

SUMMIT 218-300-33 COMPLETE WITH DANA BANDIT CONTROS, [3] CLOSED LOOP DRIVES, S/N: 13421 [LOCATED WAPPINGERS FALLS, NY] ...[more]

SUMMIT 218-300-33 COMPLETE WITH DANA BANDIT CONTROLS, S/N: 871101 ...[more]