32
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
32
EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:
Prime Movers Rigging & Industrial Services Inc.
2840 58 Avenue SE
Calgary, Alberta
Canada T2C 0B3
Attn: Dan Reed
Office: 1-403-663-0960
Mobile: 1-403-978-8072
Fax: 1-587-538-6988
dreed@primemoversinc.ca
Prime Movers can also offer machinery inspection services.
Rigging to Include: Electrical disconnect, dismantle, prep where applicable, draining fluids, securing internal components & electrical disconnects, poly/shrink wrap protection, heat treated lumber and loading onto provided trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes. Contact rigger for pricing on loading into containers, crating, etc.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
2 Day Auction!!!
Hunting Energy Services (Canada) Ltd.
Date & Time: Lots starts closing on Thursday, January 21st at 10:00 am MT
AND on Friday, January 22nd at 10:00 am ET
Location: 5550 Skyline Way NE, Calgary, AB T2E 7Z7
Inspection Date: Wednesday January 20th, 9AM - 4PM or By Appointment
Industry: CNC Machining
Featuring: (partial listing)
CNC Horizontal Multi-Turning Centers (INSTALLED NEW OCTOBER 2019)
2014 MAZAK CNC Quick Turn QTZ 250MY-2T Multi-Turn Dual Spindle/Dual Turret CNC Lathe, Mazatrol Matrix 2 CNC Control, 3.58” Bore, 26.50” Swing, 19.85” Bed, Kitagawa 12” Chuck, Y- Axis Off Center Machining, Live Tooling, 12 Position Turrets, Tool Pre-setter, Travels: X-9”, Y-4”, Z-22.76”, W-21.76”, 2x 35HP, 4,000 RPM, s/n 249432 COST OVER $450K
CNC Threading Lathes
(2) 2003 OKUMA LOC 650 2SC 1750 SIMULTURN CNC Turning Center Lathes, 14.75” Bore, OSP E100L CNC Control, Dual Turret, 22” swing, 68” Bed, 32” Chuck and back chuck, 50HP, s/n’s 102935, 103846
CNC Vertical Turning Centers
(2) 2013 EMAG VSC 400 Multi Spindle Vertical CNC Turning Centre DUO Cell, Fanuc 31 i CNC Controller, 8 Station ATC, BT50 Taper, 15.75” Chuck Size, Swing 16.5”, 11” Bed, Travels: X-33.5”, Z-12.5”, Chip Conveyor, 95HP, 6,000 RPM, s/n’s 104420 & 104421 c/w DGS Fluid Filtration Capture System, System Conveyor Transfer System
(2) 2006 OKUMA 2SP V60 Twin Spindle CNC Vertical Turning Centers, Fanuc 18i T CNC Control, 12-Station Turret, 27.5” Swing, 24” Chuck, Travels: X-14.7”, Z-25.98”, 40HP, 2,000 RPM, s/n’s 6031, 6035
2006 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 130001
2005 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 119797
Fully Integrated ARBOR Orbitform 45 Pallet Automation System, Inspection Station & Parts Flipper Arm
CNC Horizontal Turning Centers
2018 HAAS ST-45L CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 12-Station bolt on Turret, 80” Bed, 34.5” Swing, 80” Max Turning Length, SMW Autoblok Big Bore 18” Air Chuck, 40HP, 1,400 RPM, extended tool pocket, belt type chip conveyor, Programmable servo tailstock, remote jog handle, Rigid Tapping, steady rest provision, s/n 3110182 COST OVER $375K
2016 HYUNDAI WIA L700LMA CNC Horizontal Turning Center, 7.1” Bore, Fanuc F32i CNC Control, Programmable Steady Rest, 12-Station Tool Holder w/ Live Tooling, Tail Stock, Tool Pre-setter, 36” Swing, 98” Max Turning Length, 22” Chuck, 40HP, 3,000 RPM, s/n G3230-0050 (401 RUN HOURS, INSTALLED NEW 2016)
2013 MORI SEIKI SL-403C/800 CNC Horizontal Turning Center, 7.1” Bore, MAPPS IV F32i CNC Control, 12-Station Turret, 28” Swing, 34” Max Turning Length, 18” Air Chuck and back chuck, 40HP, 1,500 RPM, tailstock, s/n SL400131002
2011 HAAS SL-40 CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 40” Swing, 44” Max Turning Length, Schunk Big Bore 16” Air Chuck, 55HP, 1,400 RPM, Big Bore option, Rear mounted A2-11 spindle nose, bolt on turret chip conveyor, rigid tapping, Intuitive programming s/n 3087854, 2,300 Run Hours
2005 HAAS SL-40LB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5 ” Swing, 72” Max Turning Length, SMW Big Bore 18” Chuck and back chuck, 55HP, 1,400 RPM, chip conveyor, extra performance option with big bore, tool pre-setter, steady rest provision, s/n 69906
2005 HAAS SL-40L CNC Horizontal Turning Center, 3.75” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 72” Max Turning Length, 18” Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69719
2005 HAAS SL-40TB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 44” Max Turning Length, SMW Big Bore 18” Chuck and Back Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69978
2007 MAZAK CT4500M HD CNC Horizontal Turning Center, 10.8” Bore, Mazatrol Fusion 640MT Pro CNC Control, 12-Station Turret w/ Live Tooling & C axis, Programmable Steady Rest, SCHUNK 24” 4-Jaw Air Chuck, 33.8” Swing, 82” Bed, 31.8” Max Turning Length, 50HP, 3,000 RPM C/W Large Bore Bar Stacker 60mm, 90mm, 1meter lengths, s/n 203977, 5,297 Run Hours
2007 OKUMA Captain L370 CNC Horizontal Turning Centre, 10” Kitagawa BL210 Hydraulic Chuck, 2” Bore, OSP-P200L CNC Control, 12 Station Turret, 21.65″ Swing Over Bed, 20.47″ Maximum Turning Length, 20HP, 4500 RPM, Hydraulic Tailstock with Power Quill, Chip Pan and Chip Conveyor, s/n 3722070324-P517440
2007 OKUMA Simulturn LU300 -2SC600 Horizontal CNC Turning Centre, 2.44” Bore, Okuma OSP-P200L CNC control, Schunk Rota THW 260-81 10” Hydraulic chuck - 3” bore, 12-station Upper Turret, 8-Station Lower Turret, 23.6” Bed, 20.87” Swing Turning Length, 20/30 HP, 5,000 RPM, s/n 130688
2005 OKUMA LT-300M TWIN STAR CNC Horizontal Turning Center, Okuma OSP - 100 CNC Controller, 2X 12-Station Turret, 22” Swing, 26” Max Turning Length, 10” Chucks, 40HP, 380 – 5,000 RPM, s/n 116291, 3,185 Run Hours
2002 JOHNFORD TC-35H CNC Lathe, 5.5” Bore, Fanuc O-T CNC Control, 22” Swing, 13” Max Turning Diameter, 31” Max Turning Length, SMW Autoblok 18” 3-Jaw Hydraulic Chuck, 12-Station Turret, 20HP, 3,500 RPM, s/n AC1447
1999 DAINICHI F50 CNC lathe, 7.1” Bore, Fanuc 18i T CNC Control, 28” Swing, 80” Between Centers, SMW Big Bore 24” 3-Jaw Chuck, 50HP, Manual Steady rest, s/n E98Z02256
1998 MAZAK Slant Turn 50N CNC Horizontal Turning Center, 7.1” Bore, Mazatrol CNC Control, 28” Swing, 74” Between Centers, SMW 21” Chuck, 40 HP, tailstock, chip conveyor, s/n 134808
Automation Robots
(2) 2013 FANUC R-2000iB/165F 6-Axis Robot, Fanuc R30iB Control, 165KG Payload, 104” Reach, s/n’s E13644300, E13644302
Oilfield Bucking Breakout Units
NOV HYDRAULIC PECK-O-MATIC821 Bucking Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., 4,000 to 75,000 ft-lb Torque, Full Set of Jaw Packs, s/n A346147-1 w/ Roller Feed Table & Loading Area
Hydraulic Buck-On Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., Full Set of Jaw Packs w/ Roller Feed Table & Loading Area
MREI 250-Ton Cap. Casing Swage Press, 3.5” to 13.5” Cap., Full Set of Jaw Pack & Clamping Dies w/ Roller Feed Table & Loading Area
Horizontal & Cold-Cut Saws
2013 NISHIJIMAX CNC Cutoff Saw, 6” Cap. Cut Diameter, 18” Blade, Auto Loading & Bar Stocker, Chip Conveyor, Lube System, Pattern Cutting Software, 21HP, s/n 12079
HYD-MECH H-20A Automatic Horizontal Bandsaw, 20” X 20” Capacity, 20” Rounds, Auto Feed & Clamping, PLC control, Roller Feed Conveyor, s/n 80799675
CNC Coordinate Measuring
2013 ZEISS CONTURA G2CMM, Travels: X-1000mm, Y-1600mm, Z-600mm, Renishaw Probe, Granite Table, s/n 201310504042
Precision Tooling & Measuring
LARGE QTY. of Thread Gauges, High Precision Standard & Custom
COMPLETE QUALITY CONTROL DEPARTMENT Including Granite Surface Plates, Block & Pin Gauge Sets, Inside/Outside Micrometers, Inspection Machines, Height Gauges, etc.
QTY. LISTA 13-Drawer Tool Storage Cabinets
PAINT BOOTH
20’ x 20’ Paint Booth w/ Pre-Heat Tunnel, Dry Oven, Multi-Spray Head Applicators, Built in Automated Stencil Machine, Conveyor Loading, etc.
PHOSPHATE LINE
AUTOMATED ZINC & MANGANESE PHOSPHATE LINE, (8) Tank Cap. w/ (5) CONAIR HTR Thermolators
(2) CONAIR Portable End Finish Phosphate Lines, CONAIR HTR Thermolators
ENGRAVING MARKING SYSTEMS
(5) 2017-2013 SIC E10-C153 ZA Dot Peen Bench Top Marking Systems
(2) COUTH E1-153ZA Handheld Dot Peen Marking Systems
Rolling Stock & Forklifts
(2) TOYOTA 8FGCU25 Propane Forklifts, 4,500lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, s/n’s 16132, 16134
CLARK GPX25 Propane Forklift, 4,000lb Cap., 188” Max Lift, s/n 230-0174-8890KCF
NINGBO C1015M Electric Stacker, 1,500lb Cap., s/n 11018
JIB & OVERHEAD CRANES
KAVERIT 6.3-Ton Overhead Crane, 32’ Span w/ Remote, P&H Overhead Crane w/ KITO 1 Ton Electric Crane Hoist, Approx. 32’ Span, 205’ Runway
(2) DEARBORN 2-Ton Overhead Bridge Cranes w/ R&M SPACEMASTER SX 2-Ton Hoist Crane w/ Remote, Approx. 32’ Span x 115’ Runway
CRS CRANE SYSTEM Overhead Bridge Crane, 5-Ton Cap. w/ SPACEMASTER 5-Ton Hoist, Remote, Approx. 25’ Span
STRESS RELIVIEVING
iROSS INDUCTOHEAT Fluxmanager Pipe End Stress Relieving System w/ (3) iROSS Line Frequency Coil Packs, 4-1/2” to 13-5/8” Cap., Infrared & Thermal Imaging
SUPPORT & MAINTENANCE
(12) Steel Dump Hoppers
(2) DONALDSON TORRIT DB2000 Downdraft Tables
MOD-U-BLAST Sand Blast Booth w/ Dust Collectors
LARGE ASSORTMENT OF PERISHABLE TOOLING – Carbide & HSS Drill Bits, End Mills, Reamers, Taps & Dies, Boring Bars, Inserts, Usable Raw Material Inventory & Much More!
QUANITY of Precision CAT 40 & BT 40/50 Tool Holders
SAMSCO CORP. Water Evaporator Recycle System, Gas Fired
EASY-KLEEN EZ04035G-K-GP-12 Pressure Washer System, 14HP KOHLER Gas Motor, s/n 1713400
PLUS - General Fabrication & Machining Support Equipment, Lathes, Mills, Pipe Storage Racks & MORE!
IMPORTANT REMOVAL INFORMATION - COVID-19
Lot removal to be coordinated with Site Supervisor or An Approved Machinery Mover.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
18% Buyers Premium applies on all online purchases.
A $2000 refundable security deposit is required upon online registration. See Terms & Conditions Below.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: Monday January 25th, 2PM.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal deadline: All Non-Rigging & Small Items by January 29th, Remaining Items no later than February 12th.
Site Supervisor: Kevin Joiner 604-308-8040
Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
BENEFICIARY NAME:
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:
Prime Movers Rigging & Industrial Services Inc.
2840 58 Avenue SE
Calgary, Alberta
Canada T2C 0B3
Attn: Dan Reed
Office: 1-403-663-0960
Mobile: 1-403-978-8072
Fax: 1-587-538-6988
dreed@primemoversinc.ca
Prime Movers can also offer machinery inspection services.
Rigging to Include: Electrical disconnect, dismantle, prep where applicable, draining fluids, securing internal components & electrical disconnects, poly/shrink wrap protection, heat treated lumber and loading onto provided trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes. Contact rigger for pricing on loading into containers, crating, etc.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
2 Day Auction!!!
Hunting Energy Services (Canada) Ltd.
Date & Time: Lots starts closing on Thursday, January 21st at 10:00 am MT
AND on Friday, January 22nd at 10:00 am ET
Location: 5550 Skyline Way NE, Calgary, AB T2E 7Z7
Inspection Date: Wednesday January 20th, 9AM - 4PM or By Appointment
Industry: CNC Machining
Featuring: (partial listing)
CNC Horizontal Multi-Turning Centers (INSTALLED NEW OCTOBER 2019)
2014 MAZAK CNC Quick Turn QTZ 250MY-2T Multi-Turn Dual Spindle/Dual Turret CNC Lathe, Mazatrol Matrix 2 CNC Control, 3.58” Bore, 26.50” Swing, 19.85” Bed, Kitagawa 12” Chuck, Y- Axis Off Center Machining, Live Tooling, 12 Position Turrets, Tool Pre-setter, Travels: X-9”, Y-4”, Z-22.76”, W-21.76”, 2x 35HP, 4,000 RPM, s/n 249432 COST OVER $450K
CNC Threading Lathes
(2) 2003 OKUMA LOC 650 2SC 1750 SIMULTURN CNC Turning Center Lathes, 14.75” Bore, OSP E100L CNC Control, Dual Turret, 22” swing, 68” Bed, 32” Chuck and back chuck, 50HP, s/n’s 102935, 103846
CNC Vertical Turning Centers
(2) 2013 EMAG VSC 400 Multi Spindle Vertical CNC Turning Centre DUO Cell, Fanuc 31 i CNC Controller, 8 Station ATC, BT50 Taper, 15.75” Chuck Size, Swing 16.5”, 11” Bed, Travels: X-33.5”, Z-12.5”, Chip Conveyor, 95HP, 6,000 RPM, s/n’s 104420 & 104421 c/w DGS Fluid Filtration Capture System, System Conveyor Transfer System
(2) 2006 OKUMA 2SP V60 Twin Spindle CNC Vertical Turning Centers, Fanuc 18i T CNC Control, 12-Station Turret, 27.5” Swing, 24” Chuck, Travels: X-14.7”, Z-25.98”, 40HP, 2,000 RPM, s/n’s 6031, 6035
2006 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 130001
2005 OKUMA LVT-300 CNC Vertical Turning Center, Okuma Osp-P100L CNC Controller, 12 Station VDI Turret, 11.02” Swing, 7.78” Length (Height), 8” SMW Hydraulic Chuck, Travels: X-33.27”, Z-12.2”, 30HP, 4,000 RPM, s/n, 119797
Fully Integrated ARBOR Orbitform 45 Pallet Automation System, Inspection Station & Parts Flipper Arm
CNC Horizontal Turning Centers
2018 HAAS ST-45L CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 12-Station bolt on Turret, 80” Bed, 34.5” Swing, 80” Max Turning Length, SMW Autoblok Big Bore 18” Air Chuck, 40HP, 1,400 RPM, extended tool pocket, belt type chip conveyor, Programmable servo tailstock, remote jog handle, Rigid Tapping, steady rest provision, s/n 3110182 COST OVER $375K
2016 HYUNDAI WIA L700LMA CNC Horizontal Turning Center, 7.1” Bore, Fanuc F32i CNC Control, Programmable Steady Rest, 12-Station Tool Holder w/ Live Tooling, Tail Stock, Tool Pre-setter, 36” Swing, 98” Max Turning Length, 22” Chuck, 40HP, 3,000 RPM, s/n G3230-0050 (401 RUN HOURS, INSTALLED NEW 2016)
2013 MORI SEIKI SL-403C/800 CNC Horizontal Turning Center, 7.1” Bore, MAPPS IV F32i CNC Control, 12-Station Turret, 28” Swing, 34” Max Turning Length, 18” Air Chuck and back chuck, 40HP, 1,500 RPM, tailstock, s/n SL400131002
2011 HAAS SL-40 CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 40” Swing, 44” Max Turning Length, Schunk Big Bore 16” Air Chuck, 55HP, 1,400 RPM, Big Bore option, Rear mounted A2-11 spindle nose, bolt on turret chip conveyor, rigid tapping, Intuitive programming s/n 3087854, 2,300 Run Hours
2005 HAAS SL-40LB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5 ” Swing, 72” Max Turning Length, SMW Big Bore 18” Chuck and back chuck, 55HP, 1,400 RPM, chip conveyor, extra performance option with big bore, tool pre-setter, steady rest provision, s/n 69906
2005 HAAS SL-40L CNC Horizontal Turning Center, 3.75” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 72” Max Turning Length, 18” Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69719
2005 HAAS SL-40TB CNC Horizontal Turning Center, 7.1” Bore, HAAS CNC Control, 10-Station Turret, 72” Bed, 25.5” Swing, 44” Max Turning Length, SMW Big Bore 18” Chuck and Back Chuck, Tail Stock, Tool Pre-setter, 55HP, 1,400 RPM, s/n 69978
2007 MAZAK CT4500M HD CNC Horizontal Turning Center, 10.8” Bore, Mazatrol Fusion 640MT Pro CNC Control, 12-Station Turret w/ Live Tooling & C axis, Programmable Steady Rest, SCHUNK 24” 4-Jaw Air Chuck, 33.8” Swing, 82” Bed, 31.8” Max Turning Length, 50HP, 3,000 RPM C/W Large Bore Bar Stacker 60mm, 90mm, 1meter lengths, s/n 203977, 5,297 Run Hours
2007 OKUMA Captain L370 CNC Horizontal Turning Centre, 10” Kitagawa BL210 Hydraulic Chuck, 2” Bore, OSP-P200L CNC Control, 12 Station Turret, 21.65″ Swing Over Bed, 20.47″ Maximum Turning Length, 20HP, 4500 RPM, Hydraulic Tailstock with Power Quill, Chip Pan and Chip Conveyor, s/n 3722070324-P517440
2007 OKUMA Simulturn LU300 -2SC600 Horizontal CNC Turning Centre, 2.44” Bore, Okuma OSP-P200L CNC control, Schunk Rota THW 260-81 10” Hydraulic chuck - 3” bore, 12-station Upper Turret, 8-Station Lower Turret, 23.6” Bed, 20.87” Swing Turning Length, 20/30 HP, 5,000 RPM, s/n 130688
2005 OKUMA LT-300M TWIN STAR CNC Horizontal Turning Center, Okuma OSP - 100 CNC Controller, 2X 12-Station Turret, 22” Swing, 26” Max Turning Length, 10” Chucks, 40HP, 380 – 5,000 RPM, s/n 116291, 3,185 Run Hours
2002 JOHNFORD TC-35H CNC Lathe, 5.5” Bore, Fanuc O-T CNC Control, 22” Swing, 13” Max Turning Diameter, 31” Max Turning Length, SMW Autoblok 18” 3-Jaw Hydraulic Chuck, 12-Station Turret, 20HP, 3,500 RPM, s/n AC1447
1999 DAINICHI F50 CNC lathe, 7.1” Bore, Fanuc 18i T CNC Control, 28” Swing, 80” Between Centers, SMW Big Bore 24” 3-Jaw Chuck, 50HP, Manual Steady rest, s/n E98Z02256
1998 MAZAK Slant Turn 50N CNC Horizontal Turning Center, 7.1” Bore, Mazatrol CNC Control, 28” Swing, 74” Between Centers, SMW 21” Chuck, 40 HP, tailstock, chip conveyor, s/n 134808
Automation Robots
(2) 2013 FANUC R-2000iB/165F 6-Axis Robot, Fanuc R30iB Control, 165KG Payload, 104” Reach, s/n’s E13644300, E13644302
Oilfield Bucking Breakout Units
NOV HYDRAULIC PECK-O-MATIC821 Bucking Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., 4,000 to 75,000 ft-lb Torque, Full Set of Jaw Packs, s/n A346147-1 w/ Roller Feed Table & Loading Area
Hydraulic Buck-On Breakout Unit w/ Torque Monitoring & Reversable Jaws, 2-3/8” to 16” Cap., Full Set of Jaw Packs w/ Roller Feed Table & Loading Area
MREI 250-Ton Cap. Casing Swage Press, 3.5” to 13.5” Cap., Full Set of Jaw Pack & Clamping Dies w/ Roller Feed Table & Loading Area
Horizontal & Cold-Cut Saws
2013 NISHIJIMAX CNC Cutoff Saw, 6” Cap. Cut Diameter, 18” Blade, Auto Loading & Bar Stocker, Chip Conveyor, Lube System, Pattern Cutting Software, 21HP, s/n 12079
HYD-MECH H-20A Automatic Horizontal Bandsaw, 20” X 20” Capacity, 20” Rounds, Auto Feed & Clamping, PLC control, Roller Feed Conveyor, s/n 80799675
CNC Coordinate Measuring
2013 ZEISS CONTURA G2CMM, Travels: X-1000mm, Y-1600mm, Z-600mm, Renishaw Probe, Granite Table, s/n 201310504042
Precision Tooling & Measuring
LARGE QTY. of Thread Gauges, High Precision Standard & Custom
COMPLETE QUALITY CONTROL DEPARTMENT Including Granite Surface Plates, Block & Pin Gauge Sets, Inside/Outside Micrometers, Inspection Machines, Height Gauges, etc.
QTY. LISTA 13-Drawer Tool Storage Cabinets
PAINT BOOTH
20’ x 20’ Paint Booth w/ Pre-Heat Tunnel, Dry Oven, Multi-Spray Head Applicators, Built in Automated Stencil Machine, Conveyor Loading, etc.
PHOSPHATE LINE
AUTOMATED ZINC & MANGANESE PHOSPHATE LINE, (8) Tank Cap. w/ (5) CONAIR HTR Thermolators
(2) CONAIR Portable End Finish Phosphate Lines, CONAIR HTR Thermolators
ENGRAVING MARKING SYSTEMS
(5) 2017-2013 SIC E10-C153 ZA Dot Peen Bench Top Marking Systems
(2) COUTH E1-153ZA Handheld Dot Peen Marking Systems
Rolling Stock & Forklifts
(2) TOYOTA 8FGCU25 Propane Forklifts, 4,500lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, s/n’s 16132, 16134
CLARK GPX25 Propane Forklift, 4,000lb Cap., 188” Max Lift, s/n 230-0174-8890KCF
NINGBO C1015M Electric Stacker, 1,500lb Cap., s/n 11018
JIB & OVERHEAD CRANES
KAVERIT 6.3-Ton Overhead Crane, 32’ Span w/ Remote, P&H Overhead Crane w/ KITO 1 Ton Electric Crane Hoist, Approx. 32’ Span, 205’ Runway
(2) DEARBORN 2-Ton Overhead Bridge Cranes w/ R&M SPACEMASTER SX 2-Ton Hoist Crane w/ Remote, Approx. 32’ Span x 115’ Runway
CRS CRANE SYSTEM Overhead Bridge Crane, 5-Ton Cap. w/ SPACEMASTER 5-Ton Hoist, Remote, Approx. 25’ Span
STRESS RELIVIEVING
iROSS INDUCTOHEAT Fluxmanager Pipe End Stress Relieving System w/ (3) iROSS Line Frequency Coil Packs, 4-1/2” to 13-5/8” Cap., Infrared & Thermal Imaging
SUPPORT & MAINTENANCE
(12) Steel Dump Hoppers
(2) DONALDSON TORRIT DB2000 Downdraft Tables
MOD-U-BLAST Sand Blast Booth w/ Dust Collectors
LARGE ASSORTMENT OF PERISHABLE TOOLING – Carbide & HSS Drill Bits, End Mills, Reamers, Taps & Dies, Boring Bars, Inserts, Usable Raw Material Inventory & Much More!
QUANITY of Precision CAT 40 & BT 40/50 Tool Holders
SAMSCO CORP. Water Evaporator Recycle System, Gas Fired
EASY-KLEEN EZ04035G-K-GP-12 Pressure Washer System, 14HP KOHLER Gas Motor, s/n 1713400
PLUS - General Fabrication & Machining Support Equipment, Lathes, Mills, Pipe Storage Racks & MORE!
IMPORTANT REMOVAL INFORMATION - COVID-19
Lot removal to be coordinated with Site Supervisor or An Approved Machinery Mover.
We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.
If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.
We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions.
18% Buyers Premium applies on all online purchases.
A $2000 refundable security deposit is required upon online registration. See Terms & Conditions Below.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: Monday January 25th, 2PM.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal deadline: All Non-Rigging & Small Items by January 29th, Remaining Items no later than February 12th.
Site Supervisor: Kevin Joiner 604-308-8040
Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
BENEFICIARY NAME:
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.