Elevated SS auger with hopper, SS auger 96 in. long x 12 in. diameter , SS hopper 55 in. long x 48 in. wide x 46 in. deep, 12 in. x 12 in. dischar...

Tote pick chain drive trolley on rails, includes SS bag spreaders and gantry and controls **{3rd Party Simple Rigging and Loading Fee: $6500}**

Belt conveyor, 72 in. long x 12 in. wide x 39 in. tall, motor and drive, SS frame, on casters **{3rd Party Simple Rigging and Loading Fee: $375}**

SS batter mixer, Model 1500MB, SN 63900-46, year 2004, SS tank 42 in. diameter x 28 in. deep, stationary baffle, SS skid mounted, with SPX 030 SS ...

SS mix tank, 30 in. diameter x 36 in. straight side, Lightnin agitator, sloped bottom 2.5 in. discharge **{3rd Party Simple Rigging and Loading Fe...

SS inline filter 6 in. diameter x 29 in. tall, with SS pneumatic 2-way valve **{3rd Party Simple Rigging and Loading Fee: $375}**

Triclover SS pd pump, Model TSR3WLD 25MDOCT-A0, 2 in. in/out, with SS 2-way pneumatic valve **{3rd Party Simple Rigging and Loading Fee: $375}**

TSA Griddle Systems SS batter depositor, Model DP1500PSX, 10-spot depositor, SS frame, on casters, missing depositing components **{3rd Party Simp...

SS control panel, 60 in. long x 14 in. deep x 72 in. tall, with Powerflex 70 vfd 25 hp, Allen Bradley PanelView 900 **{3rd Party Simple Rigging an...

TSA Griddle Systems pancake griddle, 51 ft. long x 86 in. wide, plates 42 in. wide x 10 in. long plates, last ran pancakes 10 lanes, Allen Bradley...

1999 TSA Griddle Systems SS batter depositor, Model DP1500PSX, SN 63900 26, 10-spot depositor, SS frame, on casters, missing depositing components...

Decline conveyor from griddle, 82 in. long x 80 in. wide x 57 in. infeed x 32 in. discharge, motor and drive, SS frame, missing belt **{3rd Party ...

2-lane conveyor, dual belts 40 in. wide each lane, 24 ft. long, plastic interlocking belt, motor and drive, SS frame **{3rd Party Simple Rigging a...

(2) over conveyor cooling fans, clearance 84 in. wide x 33 in. tall, (2) fans with SS washdown motors (LOT) **{3rd Party Simple Rigging and Loadin...

Kofab reciprocating conveyor, 80 in. wide x max 96 in. long x 68 in. wide retracted, SS frame, motor and drive, missing section of belt **{3rd Par...

Spantech belt conveyor, 24 in. wide plastic interlocking belt, (2) 90 degree turns, approximately 60 ft. of total belt, 36 in. infeed x 76 in. tal...

Northfield spiral freezer, 24 in. wide SS omni grid belt, 4.125 in. tall clearance, 23 tiers, 7.5 hp drive, galvanized bolt together frame, 44 in....

Spantech discharge conveyor, 53 in. long x 24 in. wide, motor and drive, SS frame, ceiling suspended **{3rd Party Simple Rigging and Loading Fee: ...

Spantech belt conveyor, 24 in. wide plastic interlocking belt, (3) 90 degree turns, approximately 90 ft. of total belt, SS frame, ceiling suspende...

BMI incline belt conveyor, 80 in. long x 11 in. wide x 34 in. infeed x 36 in. tall discharge, motor and drive, SS frame, on casters **{3rd Party S...

BMI belt conveyor, 67 in. long x 8 in. wide x 37 in. tall, motor and drive, SS frame, on casters **{3rd Party Simple Rigging and Loading Fee: $225...

Computer cabinet, on casters, broken door **{3rd Party Simple Rigging and Loading Fee: $175}**

SS computer cabinet, on casters **{3rd Party Simple Rigging and Loading Fee: $175}**

90 degree laning conveyor, 14 ft. long, 3 lanes each 6.25 in. wide, 45 in. tall, motor and drive, SS frame **{3rd Party Simple Rigging and Loading...

ARR Tech stacker, Model 89B12-9, SN A01004-746, G-6000-PANCAKE, 6-lane, 6 in. wide lanes, stacking changes parts 4.5 in, 5.5 in., 5 in., SS frame,...

Campbell wrapper with smart infeed, Model Feeder, SN 5168-0117, 60 in. long x 6 in. wide, to lug feed, 15 in. spacing, 1 up jaw 10 in. wide, Allen...

90 degree belt conveyor, left hand turn, 36 in. long x 48 in. wide, plastic interlocking belt 6 in. wide, motor and drive, SS frame, on casters **...

Safeline metal detector with conveyor, aperture 10 in. wide x 6 in. tall, clearance 4.75 in. tall, belt 48 in. long x 8 in. wide x 37 in. tall, ar...

2006 Ishida check weigher, Model DACS-WN-030-SB/PB-1, SN 65739, 3000 gram capacity, 9.5 in. wide, 16 in. long belts, with rejector, 29 in. long x1...

Wexxar case erector with bottom sealer, Model WFT-S, SN 1581, missing parts **{3rd Party Simple Rigging and Loading Fee: $1200}**

2012 Ishida 14 head SS combination weigher, Model CCW-RS-214W-1S/30-WP, SS dimple buckets and parts in cardboard tote and Rubbermaid tote **{3rd P...

Bosch bag sealer, Model CBS-D, SN 13-31520, conveyor 120 in. long x 10 in. wide x 39 in. tall, manual height adjust, SS frame, on casters **{3rd P...

3M Matic 120af adjustable case sealer, Type 19600, with tail tuck, top and bottom tape heads **{3rd Party Simple Rigging and Loading Fee: $375}**

Belt conveyor, white plastic interlocking belt 96 in. long x 12 in. wide x 40 in. tall, motor and drive, SS frame **{3rd Party Simple Rigging and ...

Belt conveyor, 16 ft. long x 5.5 in. wide x 36 in. tall, motor and drive, SS frame **{3rd Party Simple Rigging and Loading Fee: $325}**

2-lane conveyor, dual 13 in. blue plastic interlocking belts, 21 ft. long x 36 in. tall, with VFD, motor and drive, SS frame **{3rd Party Simple R...

Shuttleworth accumulation conveyor, 120 in. long x 7 in. wide x 40 in. tall, motor and drive, SS frame, on casters **{3rd Party Simple Rigging and...

2014 Safeline Mettler Toledo metal detector with conveyor, Model SL2000, SN 8168901, 16 in. wide x 13.75 in. tall, 12 in. tall clearance , white p...

Safeline metal detector with conveyor, Model SL1000, SN 21855-01, aperture 9.75 in. wide x 6 in.t all, 5 in. tall clearance, plastic interlocking ...

Conveyor Plus belt conveyor, 132 in. long x 18 in. wide x 35 in. tall, motor and drive, SS frame, carbon steel legs **{3rd Party Simple Rigging an...

Pallet conveyor, 152 in. long x 55 in. wide x 32 in. tall, and (1) 90 degree turn section, **{3rd Party Simple Rigging and Loading Fee: $450}**

SS mezzanine for multi-head combination weigher, 96 in. long x 96 in. wide x 80 in. tall clearance, SS lapyere stairs, handrails and diamond plate...

Chantland auger bagger scale, Model 4198-FGLC, SS infeed, with SS auger and SS frame, on casters **{3rd Party Simple Rigging and Loading Fee: $375...

Incline belt conveyor, plastic table top belt, 140 in. long x 7.5 in. wide x 47 in. infeed x 36 in. discharge, Allen Bradley powerflex vfd, motor ...

Hytrol skate conveyor, 120 in. long x 9.5 in. wide x 30 in. tall, mild steel frame, on casters **{3rd Party Simple Rigging and Loading Fee: $225}**

Spantech S turn incline conveyor, right hand turn, 6 in. wide belt, 142 in. long, 36 in. offset to the right, 10 in. infeed, 36 in. discharge, mot...

SS skate conveyor, 116 in. long x 13 in. wide x 28 in. tall, SS frame **{3rd Party Simple Rigging and Loading Fee: $150}**

Spiroflow incline auger, SS hopper 36 in. x 36 in. x 32 in., 44 in. infeed x 72 in. discharge, missing auger motor, SS frame, with fork pockets, o...

Spiroflow incline auger, SS hopper 36 in. x 36 in. x 32 in., 44 in. infeed x 72 in. discharge, missing auger motor, SS frame, with fork pockets, o...

SS cart with chain conveyor, heavy duty drive, SS cart, on casters **{3rd Party Simple Rigging and Loading Fee: $225}**

Kaeser air compressor, Model BS 60, 240 cfm **{3rd Party Simple Rigging and Loading Fee: $225}**

SS horizonal tank with agitator, 104 in. diameter x 12 ft. long, center agitator, jacketed, painted outside **{3rd Party Simple Rigging and Loadin...

SS centrifugal pump, 1.5 in. in/out **{3rd Party Simple Rigging and Loading Fee: $125}**

SS horizonal tank with agitator, 96 in. diameter x 12 ft. long, center agitator, jacketed, spray ball, painted outside **{3rd Party Simple Rigging...

Alfa Laval SS pd pump with drive, Model SRU1/005/LD **{3rd Party Simple Rigging and Loading Fee: $125}**

Nestaflex portable skate conveyor, 56 in. long x 16 in. wide contracted **{3rd Party Simple Rigging and Loading Fee: $150}**

SS tote with fork pockets, 48 in. long x 42 in. wide x 42 in. deep, 16 in. tall legs **{3rd Party Simple Rigging and Loading Fee: $200}**

SS tote stand, 36 in. tall **{3rd Party Simple Rigging and Loading Fee: $200}**

SS platform on wheels, 8-step, 120 in. long overall, 32 in. wide steps **{3rd Party Simple Rigging and Loading Fee: $200}**

SS portable fume extractor, on caters, 12 in. diameter fan **{3rd Party Simple Rigging and Loading Fee: $200}**