Filtered by:
- Category
- List
- Grid
-
73 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
BID QUICKLY. LOTS ARE STAGGERED TO END EVERY 60 SECONDS WHEN AUCTION BEGINS CLOSING AND WILL BE EXTENDED BY SEVEN MINUTES FROM TOP BID.
RIGGING AND REMOVAL INFORMATION
PICKUP / REMOVAL DATES & TIMES: . PICK UP IS BY APPOINTMENT ONLY. ALL INFORMATION FOR PICK-UP WILL BE ON THE WINNERS EMAIL INCLUDING EXACT ADDRESS...
PAY ATTENTION TO ITEM LOCATION
ASSETS ARE LOCATED IN MULTIPLE LOCATIONS. MAKE SURE TO CHECK ITEM LOCATION BEFORE BIDDING. FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.
MILWAUKEE M18 FORCELOGIC 6T KNOCKOUT TOOL KIT PLEASE CHECK RIGGING & REMOVALS TAB FOR RIGGING DETAILS Item Location - New Hope, MN OUT OF ST...
1997 HURCO HAWK 5M 3 AXIS CNC MILL WITH MACHMOTION CONTROL X AXIS 800MM Y AXIS 350MM Z AXIS 125MM KNEE TRAVEL 375MM SPINDLE TAPER CAT 40 SPINDLE S...
LANGMUIR XR CROSSFIRE 4X8 96" X 48" CNC PLASMA TABLE WITH RAZORWELD 46 PLEASE CHECK RIGGING & REMOVALS TAB FOR RIGGING DETAILS Item Location...
(7) IKEA BEKANT ELECTRONIC ADJUSTABLE SIT/STAND DESK HTTPS://WWW.IKEA.COM/US/EN/P/BEKANT-DESK-SIT-STAND-WHITE-S49022538/ HTTPS://WWW.IKEA.COM/US...
LOT OF CAT40 TOOLHOLDERS
LOT OF CAT40 TOOLHOLDERS PLEASE CHECK RIGGING & REMOVALS TAB FOR RIGGING DETAILS Item Location - New Hope, MN OUT OF STATE BIDDERS: There is...
X AXIS: 22″ Y AXIS: 22″ Z AXIS: 26″ PALLET SIZE: 15.7″ X 15.7″ CONTROL: FANUC F31IB MAX SPINDLE SPEED: 20,000 RPM SPINDLE TAPER: CAT 40 TOO...
X-AXIS TRAVEL: 27.6″ Y-AXIS TRAVEL: 16.5″ Z-AXIS TRAVEL: 15″ TABLE SIZE: 33.1″ X 16.5″ MAX TABLE LOAD: 882 LBS SPINDLE MOTOR: 15 HP SPINDLE ...
SIEMENS 840D X-AXIS TRAVEL: 27.6" RAPID TRAVERSE RATE (X/Y/Z): 2,362 IPM TABLE SIZE: 33.1" X 16.5" SPINDLE TAPER: BT-30 SPINDLE SPEED: 24,000...
SPINDLE QUANTITY: 3 TRAVEL: 300MM MOTOR: 11 HP MAX DRILL DIAMETER: 40MM RAPID ADVANCE AND RETRACT: 20FPM MAX FEED RATE: 12IPM DRILL HOLDE...
BAR DIAMETER CAP..5 MM TO 67 MM (.196” TO 2.630”) 60” (1.5 M MODEL – STANDARD) (NOT TO EXCEED SPINDLE LENGTH) MAX BAR LENGTH: 48” (1.2 M MODEL – ...
HAAS VF-3SS VERTICAL MACHINING CENTER WITH APC, 5 AXIS, DUAL HRT210 ROTARY TABLES; YEAR 2008
X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 1,400 IPM RAPID RATE Y AXIS: 1,400 IPM RAPID RATE Z AXIS: 1,400 I...
LASER TYPE: CO2 GAS MAXIMUM WORKPIECE DIMENSIONS: 60.039 IN X 120.078 IN MAXIMUM WORKPIECE WEIGHT: 2,050 LBS. MACHINE TRAVELS X AXIS: 122.046 ...
WITH BAR FEEDER SN: 68830 MAX SWING: 23″ MAX BAR CAPACITY: 2″ MAX TURNING DIAMETER: 10.3” MAX TURNING LENGTH: 20″ X-AXIS TRAVEL: 8.45″ Z-AXI...
TABLE SIZE: 25″W X 54″L X AXIS TRAVEL: 40″ Y AXIS TRAVEL: 26″ Z AXIS TRAVEL: 25″ RAPID TRAVERSE: 720 IPM CUTTING FEED RATE: 500 IMP SPINDLE ...
SN: 38945 X AXIS TRAVEL: 50" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 710 IPM RAPID RATE Y AXIS: 710 IPM RAPID RATE Z AXIS: ...
JV10 CHIPBLASTER #1; YEAR 2000
MAXIMUM PRESSURE: PSIG 1500 PSIG MAXIMUM PRESSURE: BAR 103.4 BAR COOLANT VOLUME: GALLONS PER MINUTE 10 GPM COOLANT VOLUME: LITERS PER MINUTE 37...
JV10 CHIPBLASTER #2; YEAR 2000
MAXIMUM PRESSURE: PSIG 1500 PSIG MAXIMUM PRESSURE: BAR 103.4 BAR COOLANT VOLUME: GALLONS PER MINUTE 10 GPM COOLANT VOLUME: LITERS PER MINUTE 37...
JV10 CHIPBLASTER #3; YEAR 2000
MAXIMUM PRESSURE: PSIG 1500 PSIG MAXIMUM PRESSURE: BAR 103.4 BAR COOLANT VOLUME: GALLONS PER MINUTE 10 GPM COOLANT VOLUME: LITERS PER MINUTE 37...
JV10 CHIPBLASTER #4; YEAR 2000
MAXIMUM PRESSURE: PSIG 1500 PSIG MAXIMUM PRESSURE: BAR 103.4 BAR COOLANT VOLUME: GALLONS PER MINUTE 10 GPM COOLANT VOLUME: LITERS PER MINUTE 37...
CONTROL: CENTURION 6 TABLE SIZE: 17.7" MAX TABLE LOAD: 1500 LBS X-AXIS: TRAVEL 40" Y-AXIS: TRAVEL 20" Z-AXIS: TRAVEL 21.5" SPINDLE MOTOR: 15...
TURNING DIAMETER MAX: 0.787" (20MM) TURNING LENGTH MAX: 7.870" (200MM) BAR CAPACITY STD: 0.787" (20MM) RPM: 300 - 10000 HP: 5.00 NOSE: NOMURA...
CAPACITY: 32MM (1.26″) LENGTH: 190MM (7.5″) AXES X1, Y1, Z1, C1, X2, Z2 MAIN SPINDLE RPM: 8,000 SUB SPINDLE RPM: 8,000 MAX TOOLS: 33 OD TOOL...
SWING: 5.91" MACHINING LENGTH: 3.15" # AXIS: 4 BAR CAPACITY: 1.65" MAX. TURNING DIAM.: 5.91" POWER: 15 HP MAX RPM: 4,500 RPM LIVE TOOLING: ...
TABLE SIZE 10" X 50" X-AXIS TRAVEL 32" Y-AXIS TRAVEL 15" Z-AXIS TRAVEL (MILLSLIDE) 5.5" QUILL TRAVEL 5" KNEE TRAVEL 14" MAX TABLE LOAD 750 L...
SWING OVER THE BED: 20.47″ SWING OVER THE CROSS SLIDE: 13.78″ MAXIMUM TURNING DIAMETER: 14.96″ MAXIMUM TURNING LENGTH: 20.87″ CHUCK SIZE: 10...
SBZ 628 S: PASS-THROUGH SYSTEM FOR WINDOWS, DOORS AND CURTAIN WALLS. FOUR SPINDLES FOR ROUTING OR DRILLING SEPARATING CUTS FROM -45° TO 90° (LEA...
MAX. BENDING LENGTH: 2650 MM MIN. LENGTH BETWEEN BENDS: 350MM MIN. WIDTH BETWEEN BENDS: 135MM SHEET LENGTH MIN/MAX: 370MM/ 2850MM SHEET WIDTH ...
TSC, FANUC CONTROL, CHIP CONVEYOR TABLE SIZE: 47.24" X 19.68" MAX WEIGHT ON TABLE: 1800 LBS X AXIS TRAVEL: 40.15" Y AXIS TRAVEL: 19.68" Z A...
Machining Capacity Max. Turning Diameter: 23.23 in Max. Turning Length: 46.81 in Main Spindle Chuck Size: 15 in Spindle Nose: A2-8 Hole ...
WATTAGE: 4,000 X-AXIS: 120″ Y-AXIS: 60″ Z-AXIS: 5″ IPM: 5.5″ MAXIMUM WORKPIECE WEIGHT: 1,984 LBS. CUTTING CAPACITY: MILD STEEL: 1″ STAIN...
SWING OVER BED: 21” SWING OVER SLIDE: 12.5" MAX CENTER DISTANCE: 72" SPINDLE NOSE: D1-6 SPINDLE BORE: 1 5/8" SPINDLE SPEEDS: 16 CHANGES 18 TO...
WORKHOLDING: 5C COLLET/ 4” CHUCK MAX (OPT.) MAX. CUTTING DIAMETER: 6” MAX. BAR DIAMETER: 1.06” TOOLING PLATE: 6” X 14” WITH 3/8” T-SLOT SPINDL...
MAXIMUM SWING OVER BED: 26" MAXIMUM TURNING DIAMETER: 20.5" MAXIMUM TURNING LENGTH: 39.4" CHUCK SIZE: 12" SPINDLE BORE: 4.33" SPINDLE NOSE: A...
MAX. SWING OVER BED: 33.46" MAX. TURNING DIAMETER: 22.83" MAX. TURNING LENGTH: 118.11" BAR CAPACITY: 4.33" THRU BORE: 4.33" SPINDLE SPEED RAN...
HAAS VF1 VERTICAL MACHINING CENTER Item Location - MO ...[more]
HAAS VF3 VERTICAL MACHINING CENTER Item Location: MO ...[more]
HAAS SPARE PARTS; INCLUDING Z-AXIS WAY COVERS, ETC Item Location - MO ...[more]
CINCINNATI UNIVERSAL MILL
CINCINNATI UNIVERSAL MILL Item Location - MO ...[more]
MONARCH ENGINE LATHE
MONARCH ENGINE LATHE Item Location - MO ...[more]
6000 WATT BYSTRONIC BYAUTONOM 4020 BYLASER 6000 CO2 LASER , 6' x 13' Table, W/Rotary Axis Tube 2015
Construction Length: [L] 590 in Construction Width: [W] 303 in Construction Height: [H] 95 in Nominal Sheet Size: (X) 157 in Nominal Sheet Siz...
TRAVELS X AXIS: 63.0” TRAVELS Y AXIS: 118.0” TRAVEL Z AXIS: 6” MAX WORKPIECE DIMENSIONS: (W X D X H): 88” X 165.7” X 6.0” SUBMERGED MACHINING ...
DOOSAN PUMA 2500LSY LIVE TOOL, Y AXIS, SUBSPINDLE, CNC LATHE; 2009 MAX SWING OVER BED: 23.6" MAX TURNING DIAMETER: 13" MAX TURNING LENGTH: 29...
4000 WATT BYSTRONIC BYLASER 4400 CO2 LASER, 5' x 10' TABLE W/ BYLOADER, YEAR 2012 4000 WATT TABLE SIZE: 5' X 10' RESONATOR: 4000 W CO2 APPRO...
5' x 10' PIRANHA C510 CNC PLASMA TABLE,- HYPERTHERM POWERMAX 125: YEAR 2020 MAXIMUM RAPID SPEED: 393 IPM CNC CONTROL: STARFIRE FRAME AND BRID...
50 TON SCOTCHMAN 5075 IRONWORKER - LIGHTLY USE, TOOLING INCLUDED; YEAR 1995 PUNCH STATION 50 TON 24” BAR SHEAR 7.5” THROAT ANGLE SHEAR: 6”...
CALYPSO 60,000 PSI 12'x6' HH126 WATER JET; YEAR 2007 WIDTH: 12' LENGTH: 6' PUMP HP: 60 MAXIMUM CUTTING PRESSURE: 60,000 PSI BRIDGE GANTRY X...
PINES #1 BENDER WITH COUNTER CLOCKWISE ROTATION 7.5 HP TEFC MOTOR HYDRAULIC MANDREL EXTRACTOR AUTOMATIC SLIDE LUBRICATOR DIGITAL DIAL-A-BEND 3...
40" x 72" ENGINE LATHE MONARCH, 32NN Model 32NN, 40 HP; YEAR 1952 SWING OVER BED WAYS: 40.5 SWING OVER CROSS SLIDE: 24" SPINDLE HOLE: 2-1/4" ...
HURCO VMX-42SR VERTICAL MACHINING CENTER, 5 AXIS TILTING HEAD, WINMAX CONTROL, CHIP CONVE; YEAR 2011
HURCO VMX-42SR VERTICAL MACHINING CENTER, 5 AXIS TILTING HEAD, WINMAX Control, CHIP CONVE; YEAR 2011 X AXIS TRAVEL: 42" Y AXIS TRAVEL: 24" Z ...
HURCO TM8 CNC LATHE WINMAX CONTROL, CHIP CONVEYOR; YEAR 2006 CHUCK SIZE 8” X-AXIS TRAVELS 8″ Z-AXIS TRAVELS 20″ MAX. TURNING LENGTH 18.8″ M...
DOOSAN DNM400 VMC CHIP CONVEYOR, TSC, ROTARY TABLE, CAT40 TAPER ; YEAR 2010 TABLE WORKING SURFACE: 36.2" X 17.1" TABLE LOAD CAPACITY: 1,320 ...
DMG MORI CMX 1100V CNC VERTICAL MACHINING CENTER CHIP CONVEYOR INCLUDED; YEAR 2019 MAX. X-AXIS TRAVEL: 43.3" MAX. Y-AXIS TRAVEL: 22" MAX. Z...
HAAS TM-2P CNC VERTICAL MACHINING CENTER, LOW HOURS, CLEAN UNIT, CAT40; YEAR 2020 40”X16”X16” WORKING AREA 10-SLOT AUTOMATIC TOOL CHANGER 7.5...
175 TON X 12′ ACCURPRESS 717512 CNC BACKGUAGE & TOOLING; YEAR 1990 TONNAGE: 175 TONS OA (OVERALL) LENGTH: 12 FEET BH (BETWEEN HOUSINGS): 124 ...
HURCO TM-6I CNC LATHE WINMAX, TAILSTOCK, LOW HOURS; YEAR 2015 DISTANCE BETWEEN CENTERS: 15.8 IN SWING OVER BED DIAMETER: 15.94 IN SWING OVER ...
HAAS SL-30 CNC LATHE, TAILSTOCK, CHIP CONVEYOR; YEAR 2006 BAR CAPACITY: 3" CHUCK SIZE: 10" SPINDLE SPEED: 3,400 RPM SPINDLE MOTOR: 30 HP X ...
HAAS VF-2SS VMC AUGER, 12K SPINDLE; YEAR 2005 2005 HAAS VF-2 SS VERTICAL MACHINING CENTER TABLE 2005 HAAS VF-2 SS VERTICAL MACHINING CENTER ...
Loading...-
73 item(s)/page