Refine your search
Category
Filtered by:
- Category
- List
- Grid
-
125 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
GE 800 hp DC Motor, S/N GC-2-94, with 500 Volt, 127 Amp, 1,150/1,250 rpm, Removed From Farrel 9FCM Mixer (777) - LOCATED IN MILLERSVILLE, TN, Call...
US Motors 200 hp AC Motor, with 705 rpm, 480 Volt, Shaft Diameter 4” x 7” Length with Coupling Half, Center Line D Dimension 12.5”, Overall Length...
US Motor Mfg. 150 hp AC Mill Motor & Gearbox Drive, with Base, Right Angle Drive Assembly, 440 Volt, 1,770 rpm, 3” x 6” Output Shaft with Coupling...
Farrel DR-39 200 hp Gear Reducer, with 340 Catalog hp, Heavy Duty All Roller Bearing with Half Couplings, All Hearing Bone Gearing Excellent Condi...
XTEK 200 hp Gear Reducer, S/N SR1523, with Ratio: 28.6:1, Input Max rpm: 572, Input Roller Bearing Reducer, Double Input & Double Output Shafts, O...
6" x 12'' Two-Roll Lab Mill
12'' Two-Roll Lab Mill, with (2) Cored 6” x 12” Chromed Rolls with Rotary Unions, Split Stock Guides, Dual Friction Ratio Gearing with Clutch, Top...
Farrel 13" Two-Roll Silicone Mill, S/N 62A975, with (2) 6” x 13” Chrome Rolls, Inboard Seals, Flip Adjustable Guides, Rear Roll Material Plow with...
Bolling 24" Two-Roll Mill, with (2) 10” x 24” Cored Chromed Rolls with Rotary Unions, All Around Inboard Seals, Flip Stock Stainless Steel Guides,...
28'' Two-Roll Mill, 2014, (2) 12” x 28” Cored Rolls with Inboard/Outboard Seals, 20-25 Lb. Batch, Roller Bearing Boxes, Top Cap Construction, Mill...
30'' Two-Roll Rubber Mill, S/N 1161, with (2) Cored 16” x 30” Rolls with 10” Bearings, End Bell Water Cooling Mounts, 28” Between Guides Working S...
42'' Two-Roll Rubber Mill, with (2) 16” X 42” Cored Rolls, Stock Guides, Mill Pan, Mounted Material Cutting Knives, Adjustable, Jones Gear Reducer...
Farrel 13" Variable Speed Lab Mill, S/N 74-A-1317, with Split Stock Guides with Flip Up, Rotary Unions, Microset Roll Adjustments, Mill Pan, Opera...
Rubber Equipment Inc of California 19'' Two-Roll Mill, with (2) 8” x 19” Cored & Chromed Rolls, 18” Working Surface Between Guides, Split Adjustab...
Nippon 20" Two-Roll Mill, S/N D-3115, 1991, with (2) 20” Cored Rolls with Rotary Unions, 13.2 rpm Front Roll Speed, Bearing Box Inboard Seals, Adj...
United Rubber Machinery Exchange Mfg. 48'' Two-Roll Mill, with Top Cap Mill Design, (2) 18” x 48” Cored Chromed Rolls with Rotary Unions, Approx F...
Farrel 84" Two-Roll Rubber Mill, Rebuilt 2000, with (2) Cored Chilled Iron 26” x 26” x 84” Rolls with Rotary Unions, Split Inboard Seals, Ratchet ...
NRM 12" Three-Roll Extrusion Sheet Stack, with (3) Chromed Rolls, 12'' x 4'' with Rotary Unions, 10'' Pull Rolls, Crated Spare Rolls, Manuals, Att...
Stewart Bolling 10" x 24" Two-Roll Inclined Rubber Calender, S/N 10-218-2, with (2) Cored 10" x 24" Rolls, Inboard Seals, Adjustable Mounted Stock...
Dependable Rubber Machinery 12" x 30" Three-Roll Calender, S/N 4632-77, with (3) 12” x 30” Cored Chilled Iron Rolls with Rotary Unions, Stock Guid...
5-Can 84" X 30" S/S Heating/Cooling Calender Stand, with (5) Stainless Steel 200 psi Pressurized Cans, 388 F Max Temp, National Board Coded with U...
24" x 8" Vertical Two-Roll Lab Silicone Rubber Calender, 1990, with (2) 24” x 8” Cored Rolls, Inboard Outboard Contamination Seals, Drip Pan, Type...
Albert 12" x 30" Three-Roll Rubber Calender, with (3) Cored 12” x 30” Rolls with Rotary Unions, Attached Heat & Cool Radiator System, Chromalox Pa...
Sterlco 6016D Hot Oil Unit, S/N 26619, 24,000 Watts Per Heater, 0 - 400 F, 460/3/60, 30 Amp (779), LOADING FEE: $25 ...[more]
Sterlco 400 Series Hot Oil Unit, S/N: 46711, with 460 Volt, 12 kW, 0 - 550 F, 115 Volt Controls, On Casters, Cooling Water Circuit (782)-LOCATED I...
Lot of (4) Mokon MK4H09F8 Hot Oil Units, S/N 23932, with Total kW 27/92,000 BTU, 460 F Max Temp, 3-Zone, 9 kW Each, 32,000 BTU Each, (3) 1 hp Moto...
Farrel OOC 8 Lb. Banbury Mixer, S/N 85A 1209, with 8Lb @ Specific Gravity of 1 Batch Capacity, 8" x 6" Feed, Free Standing GE DC Drive Cabinet wit...
Baker Perkins 50-Gallon Sigma Tilt Mixer, Rebuilt 1997, with Stainless Steel Jacketed Bowl & S/S Z-Blades, Free Standing Operator Station, Tilt Hy...
Farrel BR Lab Banbury Mixer, S/N 61A3676, Attached Rotary Unions, Drop Pan & Lower Drip Pan, 5” Main Hopper Cylinder, 15 hp, Variable Speed GE 440...
Papenmeier TGAHK8 8-Liter High Intensity Mixer, with 316 Stainless Steel Jacketed Bowl 8.5” Diameter x 10” Deep, Hinged Top Cover with Baffle & Si...
Unadyn Blender Mixer
Unadyn Blender Mixer, with Stainless Steel Hopper, 24" x 36" x 36 Chamber Side Discharge, Electrics 460/230/3/60, 1,100 Lbs., 5 hp SEW-Eurodrive M...
Baker Perkins High Speed Mixer, S/N 63110, with Stainless Steel Mixing Chamber, 50/60 hp, No Controls, 4,000 Lbs., Mixer Dim: 60” T x 40” Front To...
Banbury OOC Mixer By Farrel, S/N 996095, with 6 Lb. @ Specific Gravity of 1 Batch Capacity, Types of Material Ran: Plastics & Vinyl, Mixing Capaci...
Abbe Double Ball Mixer, S/N 64832, with (2) Tumbler Bowls, with One Missing Side Cover & Bowl Damaged (See Photo), Can Sizes: 15" Dia x 13" W Each...
Carver Lab Hydraulic Press
Carver Lab Hydraulic Press, with 12'' x 12'' Electric Heat Water Cooled Platens, Enerpac Hydraulic Cylinder & Jack, No Attached Metal Table (956),...
RHM Fluid Power 10 hp Vickers Hydraulic System, S/N RHM-60-JC26108, 2012, with 60-Gallon Reservoir, Max Sys. Design 2,300 psi, Refer To Spec Tag P...
Wabash 12-Ton Hydraulic 4-Post Press, S/N 1555, with (4) 12 ”x 12” Electric Heat Platens with Safety Enclosure, Double Opening Molding Press, Atta...
PHI #SP214-C-M2-D 20-Ton Hydraulic Press, S/N 82-6-019, with (2) 8” x 8” Electric Heat Water Cooled Platens, Attached Control Panel with New Tempe...
PHI 20-Ton Hand Pump Table Model Press, with (2) 12.5” x 9” Electric Heat Water Cooled Platens, 240 Volt, Adjustable Opening To 6”, Work Height 18...
PHI 20-Ton Hand Pump Table Model Press, with (2) 9” x 12” Electric Heat Water Cooled Platens, 240 Volt, 14” Work Height, Daylight Approx. 10”, 17”...
PHI 30-Ton Hydraulic Press, S/N 87-7-017, 1987, with (3) 12” x 12” Electric Heat Insulated Platens, 220 Volt, Double Opening Press, (1) Water-Cool...
PHI 30-Ton Lab Hydraulic Press, S/N 89-8-018, 1989, with 30-Ton Gauge, (4) 18.5” x 12.5” Electric Heat & Water Cooled Insulated Platens, Stainless...
Wabash 30-1515-2T-2WCMB 30-Ton Lab Hydraulic Press, S/N 6944, with (2) 15” x 15” Electric Platens, (2) Digital Temperature Controllers, (2) 15” x ...
Wabash Genesis 30-Ton Hydraulic Press, with (4) 12? x 12? Electrically Heated, Water Cooled, Platens with Two Daylights, Each Platen Has 4,500 Wat...
Cold Feed SJ-65 2.5" Silicone Rubber Extruder, 2012, with 65 mm Screw, Silicone Profile & Rubber Profile Usage, L/D: 12:1, Power Roll Feed Assembl...
Cold Feed SJ-65 2.5" Silicone Rubber Extruder, 2012, with 65 mm Screw, Silicone Profile & Rubber Profile Usage, L/D: 12:1, Power Roll Feed Assembl...
Wayne 3" Silicone Extruder, 2002, with 3" x 42" Screw, 14:1 L/D Cold Feed Extruder, Power Roll Feed with Conveyor Rollers, Spaghetti Straining Die...
Royle #2 3.25" Rubber Extruder, with 3.25” Cored Screw, Power Roll Feed, 4" x 3" Feed-Section, 2-Section Jacketed 30" Barrel, Swing Gate Head with...
Davis Standard 3.5" Rubber Extruder, 1997, with L/D: 12:1, US Motor 75 hp DC, 1,750 rpm, 480 Volt, Screw Type: Single with Rotary Union, Gear Rati...
Barwell Midi Precision Preformer, S/N 761297-A2, with 24.5 Liter Pig Shot, Control Panel, 8” Dia. Barrel, 5 hp Hydraulic Pump Motor, 1 ½ hp Cutter...
Dynisco MJEP-300 Extruder Polymer Gear Hot Melt Pump, with Nominal Capacity 282.6 CC/Rev (16.9 kg/Hr/rpm with S.G.=1.0), Maximum Operating Pressur...
Dake 44-456 50-Ton Lab Hydraulic Press, S/N 1805462, Rebuilt 2020, with 12.5” x 12.5” Electric Heat Newly-Ground Platens, (2) 12.5” x 12.5” Water ...
PHI 50R1818S-2HS-P-MS8-R 50-Ton Hydraulic Press, S/N 81-12-017, with (2) 18” x 18” Electric Heat – Water Cooled Platens, 650 F Max, Ran 250 F To 4...
PHI 50-Ton Hand Pump Table Model Press, S/N 5144, with (2) 12.5” x 12.5” Electric Heat, Water Cooled Platens, Water Flood Valve, 9” Opening, 19” W...
PHI 50-Ton Hydraulic Press
PHI 50-Ton Hydraulic Press, with (2) 18.5” x 18.5” Electric Heat Water-Cooled Platens, 12” Working Daylight, 6.75” Ram, 39” Work Height, Table Mod...
PHI 50U1812S 50-Ton Hydraulic Press, S/N 75-4-010, with (2) 18” x 12” Electric Heat Platens, 220 Volt, Adjustable 4" Removable Spacer, Attached Co...
PHI BV-243-H-M-C 50-Ton Hydraulic Press, with (2) Electric Heat 15”x 18” Platens, Mold Shuttle, 1.5 hp Hydraulic Motor & Pump, 240/3/60, Cabinet M...
Twin 50-Ton Wabash 50-1515-2PTMAC & 50-1515-2TM, Hydraulic Presses With Shuttles, S/N 893 & 7506
Twin 50-Ton Wabash 50-1515-2PTMAC & 50-1515-2TM, Hydraulic Presses with Shuttles, S/N 893 & 7506, with (2) 15” x 15” Electric Heat Platens, Betwee...
Battenfeld 1420BP 40 hp Granulator, S/N 142017-1295, 1996, with 14” x 20” Feed, 2-Blade Closed Rotor with 3/8" Screen, Bottom Discharge Port, 40 h...
Battenfeld 1225BD-40 40 hp Granulator, S/N 122501-1189, with 25” x 12” Feed, Open Rotor Configuration, Attached Control Panel, 40 hp Baldor Motor,...
100 hp Heavy Duty Granulator
100 hp Heavy Duty Granulator, with Open Rotor, Feed Opening 15” x 24.5”, 8" Discharge, 100 hp Motor, 220/440 Volt, Mounted Operator's Pod, Bottom ...
-
125 item(s)/page