Auction closed
Live webcast

Auction dates


Viewing dates

  • 8am - 4pm ET

Auction details

Currency: USD
Buyer's premium: 18.00%

Venue address

315 Wilshire Ave SW Concord, North Carolina 28025 United States

Auction house

Add to favorites Ask a question phone_in_talk (562) 480-3041

Refine your search

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
187 item(s)
  • List
  • Grid
  • 187 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

IMPORTANT NOTICE: This is a live webcast auction (not a timed online auction). You must click the “BID LIVE NOW” button at the indicated start tim...

REGISTRATION & INSPECTION: Deposit may be required for bidders before your registration can be approved. Deposits will run against the credit card...

INVOICING & PAYMENTS: Invoices will be sent to all Buyers via email no later than 24 hours after the sale closes. An 18% Buyer's Premium will be c...

EXCLUSIVE RIGGER FOR THE SALE: Ocean Rigging, LLC, Eddie Bianco, (609) 410-5903 eddie@oceanrss.com Rigging Fee's for each item are listed in the l...

{ Choice of lots: 100, 101 } Keyence Inkjet Printer, model MK-U6000, up to six print lines, S/N 129U600884731A9K. - Located At: 1814 Ivy Ave, Win...

{ Choice of lots: 100, 101 } Keyence Inkjet Printer, model MK-U6000, up to six print lines, S/N 129U600884831A9K. - Located At: 1814 Ivy Ave, Win...

{ Choice of lots: 102 } Keyence Inkjet Printer, model MK-U6000, up to six print lines, S/N 129U600842851A9C. - Located At: 1814 Ivy Ave, Winston ...

Benda Stainless Steel Elevating Conveyor, plastic chain belt, .75HP motor with power switch, approximately 12" wide, 139" long belt with a 40" ris...

Benda Stainless Steel Elevating Conveyor, plastic chain belt, .75HP motor with power switch, approximately 12" wide, 139" long belt with a 40" ris...

{ Group of lots: 105, 106, 107 } Stainless Diverting Table, pneumatically powered, 4" diversion channels, 47" wide. - Located At: 1814 Ivy Ave, W...

{ Group of lots: 105, 106, 107 } Stainless Steel Conveyor Frame, .75HP, approximately 23" wide by 21' long total. - Located At: 1814 Ivy Ave, Win...

{ Group of lots: 105, 106, 107 } Stainless folding/mixing bin, .5HP, 38" x 64" x 17" deep. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - ...

Stainless steel jacketed tank, made by Topos Mondial, approximately 450 gallons, flat bottom, approxmately 55" diameter, 46" straight side. - Loca...

APV Crepaco Jacketed stainless steel tank, approximately 1,000 gallons, side steam jacket rated for 315 degrees at 75 PSI, refrigerant side jacket...

Square stainless steel tank, on casters, 63" x 63" x 48" tall. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Riggi...

2014 Dura-Pack M7 premade bagging machine with feeding mezzanine, up to 15 bags per minute, bag size from 4" W x 6" L to 12" W x 18" L, up to 5KG ...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, four step with ladder, 39" stand height, 26" x 28" platform. - Locate...

{ Choice of lots: 112, 113, 114, 115, 116, 117, 118 } Cross over staircase, five step with ladder, 47" stand height, 26" x 28" platform. - Locate...

Lot of two work work platforms, single step, 35" x 36" platform. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rig...

Stainless steel conveyor frame, .75 HP motor, approximately 18" x 127" chain area. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE...

{ Group of lots: 121, 122 } Crate of conveyor belts, 41" x 96" crate. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Oce...

{ Group of lots: 121, 122 } Crate of conveyor belts, 41" x 96" crate. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Oce...

Benda Stainless Steel conveyor, plastic belt, .75HP motor, 12" x 60", S/N 13148. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE R...

Stainless Steel incline conveyor, cleated plastic belt, .75HP motor, 8" x 82" belt, 33" to 66" incline. - Located At: 1814 Ivy Ave, Winston Salem,...

Benda Stainless Steel conveyor, plastic belt, 12" x 159", .75HP motor. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Oce...

Benda Stainless Steel conveyor, plastic belt, 12" x 108", .75HP motor. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Oce...

Lot of two stainless steel conveyor frames, .75HP motors, both frames are 12" x 19'. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSI...

Benda Stainless steel conveyor, .75HP motor, 12" x 354".- Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC...

Benda Stainless steel conveyor, .75HP motor, 12" x 60", 32" to 48" rise. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: O...

Benda Stainless steel conveyor, .75HP motor, 12" x 228".- Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC...

Stainless steel conveyor, stainless grate belt, .5HP motor, 18" x 127", rise from 43" to 74". - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 ...

Stainless steel conveyor, plastic belt, 12" x 239", .75HP motor. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rig...

Benda Stainless steel conveyor, 12" x 229", .75HP motor.- Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC...

Stainless Steel Conveyor, plastic belt, .75HP motor, 12" x 366" approximately. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIG...

Stainless Steel Conveyor, plastic belt, motor, 18" x 406" approximately. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: O...

Lot of two stainless steel conveyors, one incline cleated conveyor, plastic belts, two .75HP motors, 12" x 60", 8" x 103", rise from 35" to 67" fo...

Lot of four Benda stainless steel conveyors, plastic belts, all have .75HP motors, 36" wide, two 127" long, Two 84" long. - Located At: 1814 Ivy A...

{ Choice of lots: 138 } 2019 Ohlson VFFS and Scale system consisting of Ohlson 14 head scale, model MHW 14D, 10G to 3000G fill range, up to 130WP...

2019 Ohlson VFFS and Scale system consisting of Ohlson 14 head scale, model MHW 14D, 10G to 3000G fill range, up to 130WPM: Ohlson VFX 500 VFFS, s...

Ohlson VFFS parts, consisting of DSL 7.625 former and an additional film reel holder. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUS...

Weigh scale bucket cleaning cart- Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC - Rigging Fee: $75

Lot 142

Ohlson belts

Ohlson belts- Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC - Rigging Fee: $75

2018 Adco Carton Erectors With Hot Melt Glue Systems, model JET-BC-160-SS, sold as new 2021, Nordson Problue hot glue applicator, Allen Bradley Pa...

2015 Adco Carton Erectors With Hot Melt Glue Systems, model 12BC-150-SS, Nordson Problue 4 hot melt glue applicator, Allen Bradley panelview 600 H...

Nordson Problue 10 Glue melter, S/N ES16H02709. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC - Riggi...

2020 Nordson Problue Flex Glue Melter, S/N SA20E05792. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIVE RIGGER: Ocean Rigging, LLC ...

Lot of Adco cartoner parts, please see photos for contents. Shelving not including. - Located At: 1814 Ivy Ave, Winston Salem, NC 27105 - EXCLUSIV...

2017 Combi Case erector and sealer, models 2EZHS erector and TBF sealer, Bottom and top seal, S/N's 2EZHS516136 and TBF495815. - Located At: 1814 ...

2017 Combi Case erector and sealer, models 2EZHS erector and TBF100FC sealer, Bottom and top seal, S/N's 2EZHS516138 and TB181574. - Located At: 1...

{ Group of lots: 150, 151 } Combi case erector and sealer parts, please check photos for lot contents. Shelving not included. - Located At: 1814 ...

{ Group of lots: 150, 151 } Combi case erector and sealer parts, please check photos for lot contents. Shelving not included. - Located At: 1814 ...

2020 Streamfeeder P-1250 card depositor, friction feeder, on adjustable height stand, 10.5"W x 14" long max product size, 2" W x 2.5" L min produc...

{ Choice of lots: 153, 154 } Streamfeeder ST-1450 card depositor, friction feeder, on adjustable height stand, 14.5" W x 9" L max product size, 3...

{ Choice of lots: 153, 154 } Streamfeeder ST-1450 card depositor, friction feeder, on adjustable height stand, 14.5" W x 9" L max product size, 3...

Streamfeeder ST-1450 card depositor, friction feeder, on adjustable height stand, 14.5" W x 9" L max product size, 3.75" W x 2.5" L min product si...

Loading...Loading...
  • 187 item(s)
    /page

Recently Viewed Lots