Filtered by:
- Category
- List
- Grid
-
41 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Dayton DG2 Pedestal Grinder. See photo Note: All Specifications Subject to Verification ...[more]
Baileigh Pipe Mitering Machine, notch on an angle from 45 to 90 degrees, 1 HP, 110 V, 1” end mill notches from 1-3”, large feed hand wheel which c...
Big Joe Model TSUD-600 Upright Drill Press, S/N 821103 Table with Adj. Height and Tilt Spindle Speeds: 30 - 1700 RPM Date MFG 1982-11 Includes Tab...
Fosdick Upright Drill Press
Fosdick Upright Drill Press, S/N 74475 Table Size: 24" X 24" Spindle Speeds: (6) 110 - 900 RPM Spindle Motor: 1 HP Spindle Travel: 6" Electrical: ...
Maytool Model MTC-5211D Rotary Shear, S/N 0687 Spindle Speeds: 0 - 350 RPM Maximum Thickness: 0.1875" Throat depth: 37.5" Motor: 3/4 HP Note: All...
Haas TL-25B CNC Lathe
Haas TL-25B CNC Lathe, 30" swing, 16" turning capacity, 3" bar capacity, 30 HP, 3400 rpm, 39" between centers, 12 station turret, tool presetter, ...
Mori Seiki TL-5 CNC Lathe
Mori Seiki TL-5 CNC Lathe, S/N NA Rexroth IndraMotion MTX Micro CNC Controls 18" swing, 15" over carriage, 40" centers, tailstock, chip conveyor, ...
Okuma LB25 CNC Lathe
Okuma LB25 CNC Lathe, S/N 9325 Rexroth IndraMotion MTX Micro CNC Controls, 14" max turning diameter, 25" max turning length, 3.15" spindle bore, 3...
LNS Super HydroBar Manual Bar Loader, 2mm min. bar dia., 68mm (3") max. bar dia., 6000mm (236") max. bar length, oad: 182” L X 14 1/2” dia. Note:...
2007 Femco VMC 15800 CNC Vertical Machining Center, S/N 719750 34" x 74" table 59" X travel 31.5" Y travel 27" Z axis travel 50 taper 6000 rpm spi...
Fadal VMC6030 Vertical Machining Center, S/N 9304279 X Axis Travel: 60" Y Axis Travel: 30" Z Axis Travel: 30" Spindle Speeds: 40 - 10,000 RPM Spin...
Fadal VMC 4020 Vertical Machining Center, Model 906-1S, S/N 012000020199 New: 2000 X Axis Travel: 40" Y Axis Travel: 20" Z Axis Travel: 20" Spindl...
Cincinnati Milacron 10VC-1000 CNC Vertical Machining Center, S/N 49345 Cam Soft CNC Controls 40” X 20” Table, 50 taper, tool changer. Note: All S...
Okuma MC-4VAE CNC Vertical Machining Center, 20" x 40" table, 30" X travel, 16" Y travel, 17" Z travel, Cat 40 taper, 6000 rpm, 20 position tool c...
20” Tanshing 4th Axis Model MRNG-400, S/N B3A5K036JN, with 16” 4-Jaw Chuck, Tail stock Note: All Specifications Subject to Verification ...[more]
Tsudakoma 4th Axis, Model: RNCM-401R, S/N: 020085, Size of the plate: 15 3/4” with Tailstock. See photo. Note: All Specifications Subject to Veri...
10” 4th Axis Model VS-AC, S/N 02200002064, Ratio 130-1 Note: All Specifications Subject to Verification ...[more]
52" x 156" LeBlond Engine Lathe, S/N 45120 52” Swing 156" (13’) Centers, 30” 4-Jaw Chuck Spindle Speed: 255 RPM (max.) Note: Steady rest sold sep...
Axelson Engine Lathe
34" x 168" Axelson Engine Lathe, S/N 1718 Swing Over Bed; 34.5" Distance Between Centers: 168" Bed Length: 240" (20') Spindle Speeds; (Low Range):...
LeBlond Engine Lathe
LeBlond Engine Lathe , 28" swing over bed, 20" swing over cross slide, 4 jaw chuck, tailstock, steady rest, taper attachment, SN 1093 Note: All...
Mori Seiki MH-2000G Gap Bed Engine Lathe, SN 4481 24" swing 80" centers 3" Hole Newall DRO 15” 3- Jaw Chuck Tool post Tail Stock Steady Rest Note...
Mori Seiki Lathe S/N 2675
Mori Seiki Lathe MR200, S/N 2675, 20” Swing over bed, 80” Centers, 1200 RPM, Note: All Specifications Subject to Verification
13" x 30" PM Profitmaster 13 X 30 Toolroom Lathe, S/N 28053Spindle Speed: 1800 RPM (max.)6” 3-Jaw ChuckTool PostTail StockSteady RestMetric/Inch T...
15” 3-Jaw Chuck with 3” Thru Hole, Cam Lock Back Note: All Specifications Subject to Verification ...[more]
Lot of 3 Chucks
Lot of 3 Chucks: (1) 10” Chuck, (1) 10” Chuck with 3-Jaw Chuck with cam lock back, (1) 12” 4-Jaw Chuck with cam lock back Note: All Specification...
Lathe Tailstock
Lathe Tailstock. See photo. 7” to center Note: All Specifications Subject to Verification ...[more]
Lagun Republic FTV-2 Vertical Milling Machine, S/N 42227 Table Size: 10" X 50" Long. Table Travel: 33" Manual / 30" Power Feed Table Cross Travel:...
Wells Index Model 847 Vertical Milling Machine, S/N 22360 Table Size: 10" x 48" Table Longitudinal Travel: 34" Table Cross Travel: 14" Knee vertic...
Bridgeport Model J Vertical Milling Machine, S/N 90656 Note: All Specifications Subject to Verification ...[more]
Induma Vertical Milling Machine, S/N 47580, 42” x 9” table size Location: Lockwood Note: All Specifications Subject to Verification ...[more]
6” G&L Floor Type Horizontal Boring Mill Floor Plate Shown in Photos is Sold Separately Spindle Diameter: 6" Column Cross Travel: 216" Headstock V...
Shibaura BT-10B (R1) Table Type Horizontal Boring Mill, S/N 161073 44” X 49” Table 50 Taper Power Draw Bar Acu-Rite DRO Pendant Control Date Mfg: ...
Plauert-Wetzel VWF Table Type Horizontal Boring Mill, S/N NA, 49” x 40” Table, 20” Facing Head, Pendant Control, 1,400 RPM Note: All Specification...
78" Schiess Vertical Boring Mill
78" Schiess Vertical Boring Mill, S/N NA78” 4-Jaw Table, 90” Swing, 60” Under the Rail,Table Speeds: 6 - 75 RPMRH 5-Sided TurretLH RamSide Head No...
Cleveland Planer Mill
Cleveland Planer Mill, S/N 5426 34" x 160" table 44” Under Rail Milling Spindle with 50 Taper Note: All Specifications Subject to Verification ...
Davis No. 5 Key Seater, minimum key width 1/16", max key width, 1.5", max cut length 21", cabinet with tooling included Note: All Specifications ...
SMTW EcoTech Blanchard Model M7475U Rotary Surface Grinder, S/N 3578 Magnetic Chuck Diameter: 30" Maximum Work Size: 30” Vertical Travel: 17.7" Wh...
Colonial Broach Model HAS-6-54–SP Horizontal Keyway Machine, S/N D61-02-0643 Tonnage 6 T Stroke 54" Weight 17,000 lbs. Includes Tooling Note: All...
Hey No. 3 Automatic Facing and Centering Machine, S/N 12-05840 Maximum Diameter of Work Piece: 6.25” Minimum Diameter of Work Piece: 0.25” Maximum...
Lot of 4 Nook Rectifier.
Lot of 4 Nook Rectifier Model: CCHD5451. See photo. Note: All Specifications Subject to Verification ...[more]
{ Group of lots: 160, 161, 162 } Lot of 3 HUB CITY HERA 55 High-Efficiency Replacement for Worm Gear Applications. See photo. Note: All Specific...
-
41 item(s)/page