32
TSUDAKOMA Tilting 12in Rotary Table 4th & 5th Axis CNC
1/5
Auctioneer has chosen not to publish the price of this lot
Lester, Pennsylvania
6.00%
0%
Description
4th & 5th Axis Rotary Table
Make: Tsudakoma
Model: TRNC-301S
| Specification | Description |
|---|---|
| Tilt Range | ±110º |
| Table diameter | 320mm / 12.5" |
| Table height at 0º position | 345mm / 13.58" |
| Center height at 90º position | 255mm / 10.03" |
| Center bore | |
| Nose diameter | 40H7 |
| Thru diameter | 40mm / 1.57" |
| maximum motor speed | 3000 RPM |
| Speed reduction ratio | 1/360 |
| Maximum table speed | 8.3 RPM |
| Indexing accuracy arc sec | ±7.5 |
| Indexing repeatability arc sec | ±2 |
| Tilting accuracy (0º - +90º) | ± 22.5 |
| Tilting accuracy (-90º +90º) | ±30 |
| Tilting repeatability arc sec | ±2 |
| Net weight | 350kg / 770 lbs |
| Allowable wheel torque - rotary | 764 Nm / 563 Ft. lbs. |
| Allowable work inertia | .15 .63 1.91 kg.m2 |
| Allowable work weight | 150kg / 330 lbs |
| 0º - 90º tilt angle | 100 (220) |
| Allowable work moment | 254.8Nm / 187.8 ft.lbs |
| Allowable work load when clamped | 14,700N / 3,293lbf |
| 980Nm / 722 ft. lbs |
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
4th & 5th Axis Rotary Table
Make: Tsudakoma
Model: TRNC-301S
| Specification | Description |
|---|---|
| Tilt Range | ±110º |
| Table diameter | 320mm / 12.5" |
| Table height at 0º position | 345mm / 13.58" |
| Center height at 90º position | 255mm / 10.03" |
| Center bore | |
| Nose diameter | 40H7 |
| Thru diameter | 40mm / 1.57" |
| maximum motor speed | 3000 RPM |
| Speed reduction ratio | 1/360 |
| Maximum table speed | 8.3 RPM |
| Indexing accuracy arc sec | ±7.5 |
| Indexing repeatability arc sec | ±2 |
| Tilting accuracy (0º - +90º) | ± 22.5 |
| Tilting accuracy (-90º +90º) | ±30 |
| Tilting repeatability arc sec | ±2 |
| Net weight | 350kg / 770 lbs |
| Allowable wheel torque - rotary | 764 Nm / 563 Ft. lbs. |
| Allowable work inertia | .15 .63 1.91 kg.m2 |
| Allowable work weight | 150kg / 330 lbs |
| 0º - 90º tilt angle | 100 (220) |
| Allowable work moment | 254.8Nm / 187.8 ft.lbs |
| Allowable work load when clamped | 14,700N / 3,293lbf |
| 980Nm / 722 ft. lbs |
Metalworking Machinery - Heavy Equip - Forklifts & More
Ends from
Venue Address
10 Industrial Hwy
Lester
Pennsylvania
19029
United States
General delivery information available from the auctioneer
Items weighing over 2kgs- from £35 (insured for loss but not damage in the post)
Important Information
- WE WILL LOAD ONTO ANY OPEN TRIALER FOR FREE
- WE CAN PALLETIZE ANY LOTS FOR ADDITIONAL FEES
- WE CAN LOAD INTO OVERSEAS CONTAINERS FOR ADDITIONAL FEES
- INSPECTIONS AUGUST 6 & 10 ( BY APPOINTMENT ONLY)
- WE ARE LOCATED NEXT TO THE PHILADELPHIA AIRPORT
- INDOOR & OUTDOOR STORAGE AVALIBLE FOR ADDITIONAL FEE
. ( Lot 115 is off site and Loading is the buyers responsibility)
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
- Available Monday – Friday, 8:00am – 12:00am ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Terms and Conditions
All equipment is sold as is, where is on location unless otherwise stated. Equipment descriptions are intended as a guide. We recommend buyer to inspect the equipment to verify specifications and condition.
CONDITIONS: There are no warranties which extend beyond the description in quotation. Quotation is subject to change without notice.. All Specs and information are subject to buyers inspection.
Inspection: These machines are open for inspection at any time from (DATE) Mon-Fri 7:30am- 3:00pm, we are located Next to the Philadelphia Airport. Please call us to setup inspection 610-960-4815.
Loading: Most machinery will be loaded for FREE on open Trailer. We can Load into overseas containers, flat rack, Shrink wrap, or build custom Skids for overseas shipping for an additional fee, Please Call for a quote. Box truck loading may be additional fees. Setup of Shipping is required by the buyer. all items must be removed within 14 days of the close of the auction. We can store machinery for longer but storages fees will apply.
Bidding Registration: Credit Card Required for Registration
A 15% Buyers Premium will be charged to all buyers after bidding closes. All Accounts must be paid in full by wire transfer, Certified Funds, Credit Card, PayPal or Cash. If you use a credit card or PayPal there will be an additional 3% added to you bill, an invoice will follow at the conclusion of the event.
Buyer is responsible to bring all machinery to O.S.H.A. standards
Sales Tax, 6% sales tax will be charged to Each auction winners Bill unless a PA Tax Exempt Form is provided upon payment.
EQUIPMENT SAFETY for all items purchased from Equipseller: It is buyers responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up and to adequately safeguard the equipment to conform to all Federal, State and Local Government safety standards and all industrial standards.
IDEMNIFICATION: Buyer agrees to indemnify and hold harmless seller and salespersons from any and all claims or liabilities caused by or arising from the equipment on this quotation.
Lot 115 is off site and Loading is the buyers responsibility
